How do I change the aspect ration on a project in iMovie '12?

I'm trying to edit HD quality videos and post them on Vine; however, every time I use iMovie, I get nasty letterboxes. I need an aspect ratio of 1:1 to fit the screen on vine. Any help please?

There is no iMovie '12 but I assume you mean the latest version which would be '13 but which Apple now likes to be known by its version number, 10. (Yes its confusing).
iMovie 10, unlike earlier versions (and Final Cut Pro), only works with 16x9 aspect ratio. So you have to share at 16:9 then use a third party app like MpegStreamclip to produce a 480x480 pixel for Vine. This post gives more details:
Re: How to change movie dimensions in iMovie 10?
By the way 480x480 is not even TV quality let alone HD.
Geoff.

Similar Messages

How can I change the frame rate of a project in imovie 10?

My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
The goal was to make a freeze frame out of this "spezial" frame.
Unfortunately I could not find this frame in the timeline any more - it's gone.
I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
The only solution I found is to decrease the speed of the clip to let's say 50%.
But is there a better way?
Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
many thanks
Rainer
(from austria)

iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame. This is different from Imovie 9 which could handle 50 fps. However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want. After you have made a freeze frame I think you can switch the clip back to normal speed. I am not aware of a better way in iMovie 10 By the way there is also no facility to export a still of a frame in iMovie.
As a GoPro user I think FCP 10.1 would be the best choice.
Geoff.

How do I set the aspect ration for 4:3 or for 16:9?

How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?

PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR

How can I change the aspect ratio of an image display

I am snapping a sequence of images and using imgPlot to diplay the images. However, due to my camera specifications [it's a Pulnix 9701 with Pixel Size 11.6μm (H) X 13.3μm (V)], the image I get displayed is elongated in the horizontal direction, i.e. if I snap an image of a square, I get a rectangle on my computer display.
How can I change the aspect ratio of the display on my computer? The only parameters I have seen so far just control what portion of the image is acquired or diplayed, but none actually changes the aspect ratio.
Thanks in advance for any help.

If you are using an analog camera, you can set the aspect ratio in MAX. This will correct for non-square pixels.
If you are using a digital camera, I don't think there is a way to fix it during acquisition. You could resample the image to correct the ratios, but that would be a slow, time consuming process.
One other possibility is that your computer monitor is in a mode which is not a standard 4x3 configuration. For example 640x480 and 800x600 are 4:3 ratios. 1200x1024 is not, which tends to distort your displayed images.
Bruce
Bruce Ammons
Ammons Engineering

How can I change the aspect ratio

I connected my new Apple TV 2 to an LCD projector (Epson 9300) using a Belkin HDMI-to-DVI cable. The projector supports a variety of resolutions, but the aspect ratio is fixed at 4:3. The picture is therefore stretched vertically. How can I change the aspect ratio on the Apple TV?

How can I change the aspect ratio on the Apple TV?
You can't. The TV device plays content at the encoded aspect ratio. It is up to your viewing device to alter the display aspect if it can. Your primary options are to use a different viewing device capable of multiple aspect ratios, scaling, and/or zoom effects or you could simply letterbox your content when you encode it.

I am using a MacBook Pro previously owned by a colleague. How do I change the AppleID matched to my utilities (iPhoto, iMovie, ...)? I can't update them as I have my own AppleID and not my colleague's.

I am using a MacBook Pro previously owned by a colleague.
I can't update them as I have my own AppleID and not my colleague's.
How do I change the AppleID matched to my utilities (iPhoto, iMovie, ...)?

What system version are you running and what version of iApps do you currently have?
How do I change the AppleID matched to my utilities
What versions did you have? Did you purchase the iApps with your Apple ID as some previous time?
Go into the System/iCloud preference pane and sign out. Then sign back in with your Apple ID. Also sign in to the App Store with your Apple ID. If you have purchased those apps previously you'll be able to download them for free from the Purchases section.
OT

How can I change the overall duration of a project. I did it once but I can't remember and can't find the answer.

How can I change the overall duration of a project. I did it once but I can't remember and can't find the answer.

You could add more content.
Or if the project contains stills, these can be lengthened. Double-click on a still photo to open the Clip Inspector. Adjust the duration by typing in the Duration box. Be aware though that if you have transitions either side of the still, you may get odd results with the duration. See this thread for more details:
https://discussions.apple.com/thread/4269161?tstart=0
John
PS. I'm assuming you want to lengthen the project, not shorten it.
Message was edited by: John Cogdell - added PS

How do I change the aspect ratio on Final Cut Pro X?

Whenever I upload new media (regardless of what ratio it was filmed in) it plays in letterbox format. I would like to change the aspect ratio to 16:9. Thanks.

Please open the clip in the QT player and post a screen shot of the movie inspector. Post a screen **** of what you're seeing in the viewer.
You keep saying upload, do you mean import?

Can I change the aspect ratio of existing projects?

Over the past few years, I created a number of iDVD projects of special occasions. I guess the default aspect ration in the older versions of iDVD was 4:3. I now have a widescreen TV and would like to view these videos in 16:9 mode. The TV can change aspect ratios but it distorts the video. Is there a relatively easy was to redo IDVD projects to change the aspect ratio to widescreen?

The TV can change aspect ratios but it distorts the video. Is there a relatively easy was to redo IDVD projects to change the aspect ratio to widescreen?
Depends on your goals here. You can duplicate what your widescreen TV and do fairly easily but you would still end up with screen distortion if you use the entire 4:3 display area. It is is also reasonably easy to crop your 4:3 aspect to a 16:9 area within the 4:3 viewing area and burn this to a DVD. While this would prevent distortion, part of your viewing area would be lost and the result would be the same as using the the "Zoom" display on your widescreen TV. A third option might be to select a 16:9 viewing area within the original 4:3 display area. Unfortunately, this would would normally require an advanced editing application or cropping and scaling either as a whole or in selected segments. In either case it requires a much greater effort on the part of the user.
In short, actually changing an aspect ratio from is original aspect is either easy but causes distortion or it is difficult and time consuming. Further, in either case you are merely duplicating what your TV can already do. If you don't want distortion, use 16:9 "sourced" (either original or cropped) content. If you want to reduce the distortion (and your particular TV has the option), use the "Justify" viewing option which applies little or no distortion at the center of the viewing area and most distorion towards the left-right edges of the screen. Otherwise learn to live with the distortion and decide whether you prefer the distortion being applied to the DVD or just on the viewing screen.

How do you change the transitions name in sports theme in imovie

I am using iMovie sports theme and when the transitions are placed they include 2013. How do I change the 2013 under sports theme 1 transitions to 2014?

Look for the answer in this forum thread:
http://forums.adobe.com/message/5412003#5412003

Istopmotion. how can i change the frame rate in a project?

so i finally got istopmotion and i love it. its a bit tricky using the built in isight to grab shots but i am getting an external one. anywho, i was wondering if there is a way, once you have started working on a project, if you can change the framerate. i started a project, got pretty far into it, and found it was too fast. i'm probably just gonna redo this project but i wanna know for the future. thx

When you open up a new project you select your frame rate (same place where you select the format of your project). You could always slow/speed things up when you edit later in FCS or whatever you like to use for video editing.

How do I change the aspect ratio of source video in the event library?

I’ve imported video to iMovie 08 from a Canon Mini DV MD235 video camera. The video is recorded in widescreen format and plays back in widescreen when viewed from the iMovie event library (prior to doing any video editing). However, when I delete rejected frames from any particular video clip in the event library the video clip is automatically pillarboxed (i.e. switched from widescreen to 4:3 format). This squashes the video horizontally, stretches it vertically and leaves vertical black bars to the left and right of the video during playback. This automatic change in aspect ratio is occurring to the source video in the event library.
I’d be grateful for any help / advice on how I can convert the edited clips back to widescreen aspect ratio, so they display in the *event library* as they did when first imported into iMovie.

I don’t really want to clog up my hard drive with unwanted video and it’s easier to edit it from within iMovie.
Have you considered manually importing only portions of the clips you actually plan to use? Or, if you must import the entire clip, have you considered trimming externally in an application like MPEG Streamclip which will allow you to set frame level in/out points and then perform a "Save As..." operation that stores the select range of frames to an MOV file container retaining the proper flag?
Is there anything I can do from within iMovie to activate the 16:9 setting for these as yet unedited clips, so the same pillarboxing doesn’t happen?
Not sure what you mean by "unedited" here. If the files have been destructively split, the flag is gone and there is nothing you can do about it but re-compress. If you mean they are imported but as of yet whole and still contain their flags, then you have two options. The first is to edit non-destrctively within iMovie '08 and the second would be to do the trimming externally.
This second option is really fairly simple. Just close iMovie '08. Open MPEG Streamclip and load a clip you want to trim. Set your in and pout points, select the "Save As..." option, and store the files in the original Events folder with a new name. I would also recommend you perform these trims in their original time sequence so the "creation" date time groups (Finder attributes) are in time order also. When done with the loaded clip either delete it from the "Event" folder or move it to an archival location. When done with the last clip, close MPEG Streamclip, delete the Cache and Thumbnail folders from the Event folder, open iMovie '08 again, and go get a cup of coffee or tea while the files are re-thumbnailing. DO NOT DO THIS TO ANY EVENT WHICH CONTAINS FILES ALREADY USED IN ANY PROJECT. (I.e., this must be done before you start the actual project editing process.)
It seems odd to me that iMovie is doing this.
I suspect that as the application was originally written as an NLE, non-destructive, "by reference" application, the writers/updaters "overlooked" this facet when adding a "destructive" routine and did not provide for checks of this flag nor provide for copying it re-written segments.

How can i change the aspect ratio in Event Library?

the videos i imported to iMovie from iMac look horizontally distorted. i took them with an iPhone4. when importing them, i chose 16:9 ratio, this may be the reason. i can not change the ratio to 3:2. Thanks.

Hi likethis,
Welcome to the Support Communities!
The iPhone 4 records at HD 720 p, so that is why your clips are distorted.
iPhone 4 - Technical Specifications
http://support.apple.com/kb/sp587
Video recording, HD (720p) up to 30 frames per second with audio
5-megapixel still camera
Do you still have the clips on your iPhone? If so, here is how to import them into the latest version of iMovie:
iMovie Help: Import from iPad, iPhone, or iPod touch
http://help.apple.com/imovie/mac/10.0/#mov142f39686
Cheers,
- Judy

How do i change the aspect ratio??

Hey guys, I'm having a big problem. I'm an intern working for http://www.bartlettinteractive.com, and I've been editing a video in their copy of final cut express. The footage is shot with two different cameras, one is mine and the other is his, mine shoots in HD, and I imported it as 960 x 540 video. The other shot in 720 x 480. Finally we used a bunch of photos shot with a camera at something like 1600 x 1200. My problem is that now, after I've basically finished the video, my boss wants me to export into 16:9 when the entire time the canvas has been showing the video in 4:3 because of the way the flash player on their website is set up. Can someone please help me with changing the entire video's aspect ratio?

Hi(Bonjour)!
You don't need to.
You can check the sequence's anamorphic property in browser.
Or you can create an anamorphic DV sequence, insert your edited sequence into it (get the squashed result) and export the movie as self contained one. But it will be encoded to DV NTSC. It's better to export with quicktime conversion when going with flash.
Michel Boissonneault

How do I change the duration of a still image in iMovie to less than 0.1 second?

I am creating a movie using iMovie where I need the still images to be 0.05 seconds each or maybe even less., but whenever I select the still images and go to "Clip Adjustments" and under duration change 0.1s to 0.05s and select "Done", iMovie changes the duration back to 0.1s. I'm fairly new to iMovie and I've been messing around with it for quite a while now and still can't figure it out. Could someone help me?

AppleMan1958 wrote:
… I have found there is a practical limit of about 3 to 5 frames where iMovie does not want to go shorter when using the Duration popup box.
for stop-motion there are perhaps better tools avail
istopmotion is a commercial app (starting at 40€ in the AppStore) offering additional tools for the animation master, such as onioning or tilt-shift.
http://www.dayofthenewdan.com/projects/time-lapse-assembler-1
is some very basic stills-assembler, stitches stills together only, therefor free ..........

How do I change the aspect ration on a project in iMovie '12?

Similar Messages

Maybe you are looking for