How do I change the broadcast name for my MiFi wireless network?

I would like to change the SSID broadcast name for my 4620 MiFi network. I want to be able to recognize mine immediately in the sea of other wireless that is available. How do I change that name for my device?

MiFi 4620L User Guide:
http://cache.vzw.com/multimedia/mim/vzw_mifi_4620_jetpack/4620_manual.pdf
Change the SSID on a MiFi 4620L:
1. Navigate to http://vz.hotspot or the IP Address of the MiFi
2. Sign in with the Wi-Fi/Admin password posted to the back of your device
3. Click the Wi-Fi tab
4. Click the Wi-Fi Settings sub tab
5. Replace the default SSID with your own value
6. Click Save and Restart

Similar Messages

How can I change the "Full Name" for my iCloud account?

Hello,
At some point in the past, iCloud started identifying me as someone else when I send emails. This incorrect name appears to be the "Full Name" setting of the email account, but when modifying the properties for the email account in Mail the field for modifying the "Full Name" setting is disabled, not allowing me to make any changes.
Where is the correct place to change the "Full Name" setting for my iCloud account?
Thanks,
- Josh
<Email Edited By Host>

I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail (Command-Q) on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.
(The image was removed in your post above because it showed your iCloud email address.)

How I may change the encoding names for downloaded files?

I have some problem with encoding when I download files from russian sites. The downloaded files look like this "ìîé êàáèíåò - èíôîðìàöèÿ"

Firefox, as is, will only download the file. You can choose where the file is
saved, but that's it.
Go to the '''''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''''' {web link}
(There’s a lot of good stuff here) and search for '''download managers.'''
Many of them give you a chance to change the file name.

How do I change the "friendly name" for a Windows Azure subscription?

I have multiple Windows Azure subscriptions named "Subscription-1" because this was the default name given to my clients when they signed up for the service. How can I change this?

Craig,
Login to your Microsoft Online Services Customer Portal at
https://mocp.microsoftonline.com.
On the right side, in the list of "Actions", click on "Manage subscriptions".
You will then see a list of your Subscriptions. On the right side in the Action column, select "Edit service details" and click the "Go" button for the Subscription you want to edit.
You will then be prompted with a dialog that will allow you to modify your Subscription name.
Eric
Eric D. Boyd - Director, Chicago + Cloud at Centare
Blog |
twitter

How to dynamically change the table name for a update statement

Hi All,
I need to update a coulumn xyz in either of tables abc and efg based on some condition.
I wrote a cursor which has union of two queries(one querying abc and other efg)
Now based on some inparameter only one will be executed at a time.
And based on some condition a coulumn xyz needs to be updated which is in either of the table.
As the update condition is same
Update abc/efg set xyz=data where condition
I am looking to initialize a variable like v_tname based on some condition and update like
update v_tname .........
(Exactly that may not be like so, But looking a technique like this)
Please help

If there is only two tables you'll need to update then you are better off using static SQL and implementing something like this instead:
DECLARE
        update_condition        BOOLEAN;
BEGIN
        -- initialize update_condition
        update_condition := <some_boolean_check>;
        IF update_condition
        THEN
                UPDATE abc
                SET    xyz = some_val
                WHERE some_col = some_other_val;
        ELSE
                UPDATE fgh
                SET    xyz = some_val
                WHERE some_col = some_other_val;
        END IF;
END;
/Hope this helps!

How to change the attribute name for a relation

When the Data Modeler engineers a logical model into a relational model it create table columns for the relations. The names of the generated columns are listed in the attributes list in the properties dialog of the relation. The actual name of the attribute gets calculated by the attribute name of the entity which is part of the relation. This is okay, if there is only one relation between two entities. But when there are two relations between two entities the second attribute gets a stupid number suffix. This makes it impossible to give the attribute a useful semantic meaning.
When I engineer the model into a relational model I can change the column name in the relational model. Changing the column name in the relational model is not perfect but it would be okay for me, if it would not be overwritten during the next engineering run.
So I have two questions:
How can I change the attribute name in the attributes section of the properties dialog of a relation? See here for screen shot:
http://public.ceving.de/2012050300/relationattribute.png
And if it is not possible:
How can I preserve any changes on column names in the relational model during a re-engineering run?
Edited by: 931739 on 03.05.2012 08:07

Hi,
I've logged an Enhancement request on this.
I don't believe it's possible to change it from the Entity or Relationship dialog, as it's not updatable in these dialogs.
What you can do is change it in the Relational Model, and then reverse engineer the change back to the Logical Model.
David

How to change the package name for a msg class

Can anybody tell me how to change the package name for a message class.
and how will it effect in the rerport?
thanks in advance
kp

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

When bates numbering a .pdf in XI, how can I change the file name to include the bates number AND its name? I know under file output, there is an option for either/or. I want both. Thank you.

when bates numbering a .pdf in XI, how can I change the file name to include the bates number and the file name? I know under "file output: it's either/or. I need both. Thanks!

Long ago I wrote a little demo using the touch command. Check out the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=25128#M25128
LabVIEW Champion . Do more with less code and in less time .

How can I change the account name in iCloud. My email has changed and I want to change it on iCloud.

How can I change the account name in iCloud. My email has changed and I want to change it on iCloud.

To change your iCloud ID, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.
To change the ID on your Mac, go to System Preferences>iCloud, sign out, choose Delete for all the prompts (your data will still be in iCloud), then sign back in with the changed ID.

How can i change the screen name in my icould account?

my Apple ID used to have my Dad's name because of the billing issues.. now is changed again to have my name, but i keep seeing that my account on icloud.com still says my dad's name, so if i try to send an email through there it says my dad's name and my email address instead of my name...
how can i change the name that appears linked to my icloud account? (note that as i already sayd my Apple ID has my name now, i jsut want to know why is not my name in my icloud account?)
thank you,

I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail (Command-Q) on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email.
(The image was removed in your post above because it showed your iCloud email address.)

How do I change the User Agent for Safari on my iPad? I need this for a specific website for work.

How do I change the user agent for Safari on my iPad? I know how to do it on my desktop version, but I need it for my iPad.

You can rename the iPad here:
Settings - General - About - Name
For Siri make sure he has himself as a contact in the Contacts app then:
Settings - General - Siri - My Info and select his contact info

How can I change the administrator name?

I'm getting ready to sell my old I-mac. How do I change the administrator name or delete it?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. If this is not possible then simply erase the drive. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

How can I change the tag name in cursor statement?

Hi
I have two tables: TableA and TableB. I want generate a XML file using XSU12 from these two tables, the XML structure like:
<ROWSETA>
<ROWA num="1">
<A1></A1>
<A2></A2>
<A3>
<A3_ROW num="1">
<B1></B1>
<B2></B2>
</A3_ROW>
<A3_ROW num="2">
<B1></B1>
<B2></B2>
</A3_ROW>
</A3>
</ROWA>
</ROWSETA>
How can I change the tag name and attribute for "A3_ROW"?
Thanks in advance!
null

In short, you can't.
You can use the column alias as you're already doing to change the name of the "A3" part of "A3_ROW" but you cannot change the "_ROW" part of "A3_ROW". This is added automatically.
You can combine the results of XSU with an XSLT stylesheet (made very simple if you're using XSU by working with Oracle XSQL Pages) to change the name of any element or completely restructure the XML output into a target XML, HTML, or text format.

How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

If the size of the iPhone backup is putting you over the edge you have bigger problems than just this backup. You really need to solve the fundamental problem of your C: partition being too small. Even if you could solve the iPhone problem something else will come up soon that will again challenge your disk space. New drives can be had for well under $100, and even a 500 GB drive is only a little more than $100. This would be a good time to upgrade. You can even clone your current drive AND increase the partition size in one step with disk imaging software such as Acronis True Image.

How do I change the "From" name connected to my email in iCloud email?

How do I change the "From" name connected to my email messages in iCloud?

Hi,
Both modems are on a same network or 2 different networks ? If on TWO networks, the printer can see 2 networks and on the setup menu you have to select the new network, enter security code (if any) then pick it as default.
Now your machines on the same network might see 2 logical printers, one offline and one online, the online is the one connected to the new modem.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I change the broadcast name for my MiFi wireless network?

Similar Messages

Maybe you are looking for