How do I change the color of one of my calendars

My calendar for work changed to a very bright blue (by itself). How do I change back to the original red color it had?

Holby7,
Click on the Calendars button, choose a calendar, use iCal>Edit>Get Info, and select the color from the dropdown menu.

Similar Messages

How can I change the color of birthday calendar?

The birthday calendar in the new iPhone OS gets it color automatically. How can I change the color? It does not correspond to the color in iCal on my Mac.

I figured out a solution for changing the other calendars but not the birthday calendar. Although it's not the most direct fix, it worked for me. Apparently Apple didn't think to give us the ability to choose the calendar color. I use Entourage and sync over the air. When I upgraded to iOS 4 my calendar turned bright red and the birthday calendar was blue. I don't use the birthday calendar so it isn't even enabled in my case. What finally worked was to go through the calendar colors one at a time by disabling and re-enabling the calendar in my mail account settings. I would double click the home button to quickly switch between settings and calendar to check the color each time I enabled the calendar. I had to do this 4 or 5 times to cycle through until blue came back up.

How can i change the color of the graph in agreement of the program's condition

Hi,
I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
How can i change the color of the graph in agreement of the program's condition?
I am developing a VI to control the temperature of termistors,but i have another sensor too.
In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
Thanks a lot
Rafael Wajnsztajn - Brasil

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

How can I change the color in this "pieces"

Hello guys, I'm new in the forum and I'm searching for help.
I'm using a free template that I downloaded from
the internet but I'm having a small problem.
When I put the logo that I want use in the template, the color is not the original one,
after some minutes trying to discover how I could change it to the original version of the logo, I found an option on "fill" with a color that I could change..
the problem is that when I change the color, all the logo changes in the same time, so I created 2 logos.. one of then only with the dark color and the other with the red color
so with this method I could change both colors on this "fill" option and all would be okai.
the problem is that both of the logos are changing in the same time.
I need to change the X to RED and the Moto to Black
Another problem that I have is : the little pieces of the logo that come all togheter, they are all black.. and i need to change it to the right color.
cause the text are in one color and the pieces are all black.

I did it, but i saw that Fill effect is a little "Shadow" behing the text... just for a small white line... I'm almost done with this intro, now I'm trying to find out how can I change the color from the X and MOTO
cause when I change the color, both changes, and this can't happen.
I need the X red and the Moto dark...
I made 2 compositions ... one with just the X X red.. and another with just Moto in dark color... but I don't know how to put this 2 compositions in 1 composition.

How Do I Change The Color Of Part Of A Vector Image In CS6?

I have created a shape using the rectangle tool. I have then selected a section of this using the Marquee Tool (I get the running ants) but how do I change the color of the selection? I have been following a few tutorials where they say press Control-U or select Fill from the Edit menu but it is grayed out.
Any help would be most welcome.
Many Thanks
PS I am using Photoshop CS6 Extended.

Hi,
Here's but one way to change the color of just a specific portion:
1. Make your selection
2. Go to the bottom of the layers panel, click on the Create New Fill or Adjustment layer icon and then click on Solid Color
That puts a new color fill adjustment layer above the shape using a layer mask from your selection.
If you want to change the color, double click on the color fill thumbnail icon in the layers panel.
(in the example below you would double click on the green icon in the layer panel)

How do I change the color of all the text in a PDF?

Hi.
I have a large PDF, over 1000 pages. Some of the text is highlighted which makes it difficult to see on my preferred document background. In Acrobat XI how do I change the color of all the text in the document back to black please? Although solutions using any other software will be much appreciated too.
I searched this forum already, and the same question was asked back in 2007 when it appears the only solution was to use an expensive third party plugin.
Thanks.

I know of no new solutions since 2007 except the ones you found.
You could use the Accessibility Preferences > Change Document Colors to choose a text color. However, this is an individual preference and cannot be set as a default for others opening the document.

How do you change the color of a MobileMe calendar group?

How do you change the color of a MobileMe calendar group?

Are you using MobileMe? If not, the colors do not match unless you implement the rather painful workaround of loading the calendars one at a time, in the order that the iPhone assigns them (red, orange, blue, green, purple).

Array of clusters and in the cluster is a bar meter, how can I change the color individually?

Array of clusters and in the cluster is a bar meter, how can I change the color of the bar meter individually for each element of the array? I have just figured out that you can't change properties of one element of the array without all elements changing. For the scaling I had to make numeric indicators for each tick of the scale so that each bar meter in the clustered array would have individual scales. I also had to do some math to scale each barmeter to display correct proportions from 0 to 100%. Now I'm stumped on the color of the bar meter. Basically, if the value goes over a setpoint, the bar meter needs to turn red. It has to be in an array to be infinitely scalable.
Thanks
Matt
Solved!
Go to Solution.

You can't do that-
without a little trick.
You could consider laying a custom color box over the bar graph in the cluster you can set the color based on the value of the bar graph or even make a "Pseudo"- bar graph using a series of color boxes stacked to look lie a bar and changing values of the Color boxs from empty to full to red.
Here is an example to demonstrate
Jeff
Attachments:
Pseudo bar.vi ‏12 KB

How do you change the color of the title text?

The main title text for the tap your currently on shows up centered one line above the tab row. The default is black text, with a gray drop shadow, but that doesn't work with dark background themes/personas. How do I go about changing that text color so that its visible on a dark background. I've tried changing font stylings in general for the browser, and I've tried changing the color values in the about:config for the persona, but none of that works. How do you change the color of the title text?

That colors option under content doesn't change the color of the title text, but thanks anyways

How do it change the color of the background in a still photo in a imovie picture slide show

how do it change the color of the background in a still photo in a imovie picture slide show

LOL - I had the same problem. Hidden in plain sight! All I saw was Numeric, and thought "Duh! Of course it's numeric - it's a slider!"
I do think NI could do a much better job on this, perhaps with more informative labelling. Slider Scaling or Scale Format might be better. Also, since one can select the Digital Display by itself on the front panel, one should be taken directly to the digital display formatting when Properties is selected, instead of still having to change the dropdown. By selecting the digital display instaead of the slider, you're implying that you want to change its format only.

Ask your question.how do you change the color of your tex bubbles.i accidently changed it from green to blue and I dont know how i did it

how do I change the color of my tex bubbles? I changed one from green to blue accidently, and I cant figure out HOW I did it!

I have a new iPhone 4 which has the latest version uploaded. My daughter just bought an iPhone 4s and when we text it's still green. We want it to be blue for iChat. What are we doing wrong? Why don't we have blue bubbles? Any help would be greatly appreciated.
Thank you
~Tammi

How do you change the colors of individual cells within a 2D array?

How do you change the colors of individual cells within a 2D array of numeric indicators?
I want the VI to check a data value and if it is failing, white out a square at a specific index coordinate. I have it working with color boxes, but I'm not sure how to use the property node function, to change the color of individual cells, by coordinates.
I have attached the VI using color boxes. If you run the VI, the box corresponding to the Step control should turn white.
I want to do the same thing, using numeric indicator boxes inside the array.
Thanks for any suggestions...
Attachments:
Fill DME matrix.vi ‏95 KB

Get rid of all these sequences! That's just bad form.
Your code has a few logical problems. Why do you create a boolean array if you later only look at the last element (Yes, the FOR loop does nothing useful, except in the last iteration because your outputs are not indexing. All other iterations are useless, you only get the result of the last array element. My guess is that you want to color the index white if at least one of the numbers is out if range. Right?
It is an absolute nightmare to manage all your numeric labels. Just read them from a 2D array. Now you can simply find the index of the matched elements and don't have to spend hours editing case structure conditions.
Attached is a simple example how you would do what I meant (LV7.1). Modify as needed.
Message Edited by altenbach on 04-04-2006 02:04 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Fill_2DME_matrixMOD.vi ‏70 KB

How do I create a duplicate image inside the same page? Then how do I change the color of that image

how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

Hello there!
Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
My layers panel looks like below.
To duplicate your image, click the downward arrow on the right side of your Layer Panel.
Select Duplicate Layer. This will duplicate the layer that the image is on.
Select "OK" to approve the duplication.
As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
Now to colorize your image, go to Window > Adjustments.
The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
As you can see below, the image is now red.
Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
Select the move tool, so I can now move the image layers so we can see both of them.
With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
I hope that helps. i have also included helpful links.
Please post back with any questions,
Janelle

How do I change the color of a subscribed calendar?

How do I change the color or a subscribed calendar?
I can right-click the calendar in the sidebar in iCal, choose Get Info and change the color patch, but iCal returns an error and will not change the color.
The error states that "Access to account "iCloud" is not permitted. The server responded "403" to operation CalDAVSetPropertyQueueableOperation."
I have also tried changing the color offline, but that doesn't work either.
Steve.

Thanks Austin. I know of one place where you can, which is during the process of first subscribing to the shared calendar. The import dialog shows the calendar's color and you can change it at that point.
I found this out only after posting my question, and it doesn't really provide a solution to my question; but your answer does seem to support my intial observation.

How do I change the color of the desktop fonts from white to black?

How do I change the color of the fonts on the desktop to black?

You can reverse the colors of everything on the screen with one click in this Perference pane:

How do I change the color of one of my calendars

Similar Messages

Maybe you are looking for