How do I change the colour of the navigation button icons?

I was wondering if there are any add-ons or mods for Firefox 25 that would allow me to change the colour of the icons on the navigation buttons.
I'm thinking along the lines of the older style where the back and forward buttons would light up green, reload in blue, stop in red, and home with a white/yellow mix, when they are clickable.
I find with Firefox 25, I get light gray when grayed out, and dark gray when active, which I find is a bit difficult to tell at a glance. I prefer the colour-coded buttons, and was hoping there was an add-on that would allow me to change that in Firefox 25.

Sorry, not getting the second image showing up, even though I uploaded both.
Firefox 25 toolbar image below:

Similar Messages

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

How do I change Text Colour in a Spreadsheet? The Help menu doesn't help.

Simple question whcih i cannot find the simple answer to: How do I change Text Colour in a Spreadsheet? The Help menu doesn't help.

Hi Lecia,
You have several choices.
Use the first set of controls in the Format Bar. One of these is a Color well (red in the image). Select the cell(s) in which you want the text coloured, then click the well to open its Color palette, and choose your colour.
Use the Text Inspector. Open the inspector, click the Text button (T), and use the tools there (similar to the set in the Format Bar).
Press command-T to open the Fonts Window. This offers a few more options than are available in the Inspector or the Format bar.
Regarding "Help": I'd recommend using the Numbers '09 User Guide, which you can download via the Help menu. Easier to search, and easier reading than the individual Help articles. search 'text color' to quickly get to instructions on applying colour to text.
Regards,
Barry

How do you change the colour of the "colour boxes" in themes?

Creating a book in Aperture the various "Themes" offer you different layouts. When you are in a Theme - is there a way to change the colours of the background boxes (Not page colour) - I have searched everywhere to see how to do this and a simple thing like this seems like it is not possible. Yes you could make a photo of the correct colour you want and drag it in but surely there is a simple way of changing the colour of these theme boxes.
The theme I am using is Special Occasion and I want to darken the lightblue boxes behind the text.
Would appreciate anyone out there who could advise on this please, thank you in advance.
Richard
Apperture 3.4.3
iMac 21.5 OS 10.7.5
iMac 27 OS 10.6.8 (the best)

Richard,
there is no built-in option to change the color boxes. You can only change them by patching the Resorces in the Aperture application bundle, and that is risky.
The color of the background boxes is set in the property list (for the Extra Large Book):
/Applications/Aperture.app/Contents/Resources/Book Themes/Special Occasion/ExtraLarge/Graphics/BlueRect.plist
The current value is:
backgroundColor {224, 241, 238, 100}
To try what happens, when this value is changed, I edited it to {100, 200, 255, 100}
You will not really want to patch your Aperture application bundle
What you might try, would be to copy the "Special Occasion" subfolder of the Book Themes and to create your own custom theme from this and install it in your user library
~/Library/Application Support/Aperture/Book Themes/
-- Léonie

How can I change the colour of the tools?

I want to change the colour of the blue box next to the word diabc. The blue field is a tool with you can change the text. I know how to change one field at a time but I want to change the standard settigns, so that I don't have to change it field for field. I can't find it anywhere. I have found some information about changing the tool bars, but you can't change this tool I use. Only others.
Who can help me? I have Adobe Acrobat 9 pro extended. I use the Dutch version, so some things may have a different name.
I have included some pictures.
If you have any questions, just ask.

Thanks for your help so far.
I hope you can see it now. It's a bit difficult to make a picture from my print screen, because I don't have the right programs at my computer at work.
The menu is in Dutch. But I don't have so many options as you have. If I go to 'eigenschappen' (in English properties) I get this menu. In this menu you can change the colour, but Adobe doesnt' remember this, so you have to change it every time. And that's quite a lot of work if you want to do this. Because I have to review a document of 40 pages.

How can i change the colour of the keys on my mac? is it possible to get them changed?

i was looking at a macbook i was today and it's keys on the keyboard were in a rainbow formation, with different colours. Is there a way to bring mine in to change the colours of the keys? or did i have to order it like that?

Ask the person who owned the computer or do a Google & Bing search.

How do you change the colour of the text box?

A lot of the text box options seem different for DC. Is there a way to change the colour of the text box that you create/the borders etc.?
In the past, you would just press Ctrl+E and a toolbar would pop up so that you could fiddle w/ the colour of the background etc. This seems to be gone.
Thanks for your help!

Hi, Rahul,
Thank you for replying back.
Unfortunately, I have tried what you have suggested and the only thing that I get is a box that says "Properties: No current selection."
Could you please possibly see what it is that I am doing wrong?
I created the text box, wrote whatever inside, clicked somewhere outside the box and then clicked on the text box and I still only get "Properties: No current selection."
Thank you,
Arrom

How to change the colour of the table cell editor on some condition?

Hi all,
I have a requirment acco which i need to make the colour of the tableceleditor ias RED and font color white when the data in that is < 0.please tell me how is this possible and its urgent..
regards
Sharan

If you are using release NW04 and have a TextView as table cell editor, you can do this:
Add a calculated attribute "Color" of DDIC type "com.sap.ide.webdynpro.uielementdefinitions.TextViewSemanticColor" under the data source node of the table.
Bind the "semanticColor" of the cell editor to this context attribute.
Implement the get-method for the calc. attribute like this
WDTextViewSemanticColor get<DataSourceNode>Color(I<DataSourceNode>Element element)
return element.getValue() < 0 ? WDTextViewSemanticColor.NEGATIVE : WDTextViewSemanticColor.STANDARD;
Armin

How do I get my printer to match the colours of the image as I see it on screen?

How do I get my printer to match the colours of the image as I see it on screen? My HP Office Jet Pro L7680 printer tends to print my images with a bias towards red compared to the image I am seeing on screen with Lightroom 5 using a Mac with Retina 5 screen. Would appreciate any expertise on how to calibrate the printer to the screen

You have two options. The first method costs nothing but is not as accurate and the second means buying hardware and investing some time. The fastest way to get things closer is to download the color profile from the printer manufactures site for the printer and paper combination you are using. Install it on you Mac and relaunch LR. This is best when the paper and printer are both from the same company; in your case, HP. If the paper is not made by HP, you can often find profiles for your paper/printer by going to the paper maker's web site and doing a search for the appropriate profile.
The other alternative is to purchase a piece of hardware such as the ColorMonki which can be used to not only profile your monitor for color balance but also you printer/paper as well as your camera. When all of your devices agree on what color 118,118,118 means, you get the same color from capture to print but this is also an expensive option and there is a lot of time involved in building your own color profiles. The results however, are much more accurate.
Once you have a color profile installed, the next step involves doing soft proofing. Once you have your image looking the way you want it to in LR, open it in the soft proof option. This will show you how your print will look using the color profile for the paper/printer you are using. During the process, you will be shown the print on your screen which may look off. Use the small triangle in the upper-right corner of the histogram to turn on the out-of-gamut warning. This will highlight any parts of your image which contain colors your printer can't handle. Use the rendering intent options to decide how you want these colors handled (relative or perceptual). Check them both and use the one you like best. You can also make additional changes at this point if required before you generate the JPG image. Make sure to save it as a max quality JPG using the sRGP profile. Once saved, you can send this image to your printer or even to a lab as the process is the same.The attached link should get you to a video showing how to use the ColorMunki hardware/software but, more importantly, shows you how to prepare an image for printing (in this case, for a lab) using soft proofing with the color profile created (or downloaded).--Great Color from Your Lab Prints – Every Time! on Vimeo

Is it possible to change the colour of the bars in a chart on the iPad?

I'm using keynote for iOS and I'm trying to pick the bar colour for my charts. I understand that the default settings will change the colour for each new series but I have a few charts all with a single series and I would like to change the colours along the way. Below is an image from my presentation, basically I'm looking for guidance on how to make the blue bars into red bars.

Set the grid background color black and set the GridItem background color something else.
Here is an example.it is better to set this kind style attributes in css
<mx:Grid backgroundColor="#000000" verticalGap="0">
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
</mx:Grid>

Change the colour of the tile dynamically:

Hi,
I have 12 tiles in my application. Depending upon some condition, few tiles colour should be changed and also to the same tiles image should be added. (I'm creating tiles using Border)
Can anybody suggest how can I achieve this?
Thanks,
Santosh

Please close your previous threads before you start a new one.
Also, you have asked this very same question before here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b3752b09-2ee2-46ac-a941-dc7baad78110/change-the-colour-of-the-rectangle-dynamically?forum=wpf#b3752b09-2ee2-46ac-a941-dc7baad78110.
Please don't ask the same question twice.
You could use DataTriggers and/or converters to change the property of some UI element based on some condition as already suggested in the previous thread.
Of course you must post your code, or even better upload a reproducable sample of your issue to OneDrive and post the link to it here, for anyone to be able to provide a specific solution.
But note that the forums are not for anyone else to do the entire work for you. You were given code samples of how to use data triggers and converters in the previous thread. That should certainly give you the idea.
Please remember to close your threads by marking helpful posts as answer and please start a new thread if you have a new question.

Change the colour of the rectangle dynamically:

Hi,
I've some tiles in wpf application. (non clickable, drawn using Rectangle). I want to change the colour of the tile depending upon condition Ok, Warning, Error to the colour Blue, Yellow, Red respectively.
Can you please let me know how can I achieve this?
Thanks,
Santosh

Thanks for the response.
I'm using Datatemplate like below:
<DataTemplate x:Key="Template1" DataType="{x:Type BusinessObjects:BindableCapability}">
<Border x:Name="CapabilityBorder"
Background="{StaticResource GlobalHeaderBackgroundBrush}"
BorderBrush="{StaticResource TileBorderBrush}"
BorderThickness="1"
Margin="8"
Height="200"
Width="420">
<Grid>
<TextBlock x:Name="CapabilityTextBlock"
Text="{Binding CapabilityIdentifierDescription}"
Style="{StaticResource TileTitleTextStyle}"/>
</Grid>
</Border>
<DataTemplate.Triggers>
<DataTrigger Binding="{Binding IsAvailable}" Value="False">
<Setter TargetName="CapabilityBorder" Property="Background" Value="{StaticResource TileErrorBrush}"/>
<Setter TargetName="CapabilityTextBlock" Property="Foreground" Value="{StaticResource TileErrorForegroundBrush}"/>
</DataTrigger>
</DataTemplate.Triggers>
</DataTemplate>
<DataTemplate x:Key="Template2" DataType="{x:Type BusinessObjects:BindableCapability}">
<Border x:Name="CapabilityBorder"
Background="{StaticResource GlobalHeaderBackgroundBrush}"
BorderBrush="{StaticResource TileBorderBrush}"
BorderThickness="1"
Margin="8"
Height="200"
Width="202">
<Grid>
<TextBlock x:Name="CapabilityTextBlock"
Text="{Binding CapabilityIdentifierDescription}"
Style="{StaticResource TileTitleTextStyle}"/>
</Grid>
</Border>
<DataTemplate.Triggers>
<DataTrigger Binding="{Binding IsAvailable}" Value="False">
<Setter TargetName="CapabilityBorder" Property="Background" Value="{StaticResource TileErrorBrush}"/>
<Setter TargetName="CapabilityTextBlock" Property="Foreground" Value="{StaticResource TileErrorForegroundBrush}"/>
</DataTrigger>
</DataTemplate.Triggers>
</DataTemplate>
Like Temlate1 and Templdate2, I should have one more template which fills the color dynamically for the above templates. I've 12 tiles (rectangles), I need to give some blue, some yellow and some red depending upon some condition.
Please suggest how I can achieve this?
Thanks,
Santosh

To change the colour of the background(of the screen) when reading. Got the answer!

Hi! Just learned how to change the colour of the background to make it more friendly to the eye and want to share it with you)
1) Open Adobe Reader. Go to Edit - Preferences - Accessibility.
2) Make sure the "Replace Document Colors" is checked and click on Custom Color.
3) Click "Page Background" color and then select "other color." Here's my custom neutral color settings:
[imgur.com]
You can also do the same for any of your favorite word processor applications. It will make writing and reading easier on the eyes!

Hi! Just learned how to change the colour of the background to make it more friendly to the eye and want to share it with you)
1) Open Adobe Reader. Go to Edit - Preferences - Accessibility.
2) Make sure the "Replace Document Colors" is checked and click on Custom Color.
3) Click "Page Background" color and then select "other color." Here's my custom neutral color settings:
[imgur.com]
You can also do the same for any of your favorite word processor applications. It will make writing and reading easier on the eyes!

Change the colour of the outer line of a circle

Hello everyone,
I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode, but I'm clueless.
Here is my drawing:
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
So I'm lost here, any help please?
Unfortunately I'm still not an expert in Photoshop just yet.
Thank you for reading my post.

Set shape layer opacity 100% Fill 0% to make fill transparent or add an empty layer make a circular selection stroke it black.

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

How do I change the colour of the navigation button icons?

Similar Messages

Maybe you are looking for