How do I change the default work and home addresses?

I am using iCal 8.0 with Yosemite 10.10.1. I moved a month ago and cannot figure out how to change the default "home" address in the program. The same is true on my iPhone. I updated my address in Contacts to no avail. I am having the same problem on my iPhone. It also struggles with my work address: I work at number 80 on my street, in suite 7C, and iCal interprets the data as 7C (Street), showing me on the map several blocks below my actual office.
Any help with these problems would be most appreciated.

Try with this add-on: https://support.mozilla.org/it/questions/972227
or this one: https://addons.mozilla.org/en-US/firefox/addon/cstbb/?src=search

Similar Messages

How do I change the default apple id (email address) that is prompted on my iPhone? It prompts me with an id that I do not have and cannot access.

How do I change the default apple id (email address) that is prompted on my iPhone? It prompts me with an id that I do not have and cannot access.

When do you get prompted for this ID? If you are asked for an AppleID
you do not know during Activation, contact the seller for assistance. Only
the person who set the Activation Lock can remove it. If the seller refuses
or does not know the requested AppleID and passcode, return the iPhone
for a full refund as it is useless. There is no work around for Activation Lock,
The person who set the lock needs to follow the actions in this link:
Prepare your device to sell or give away
You can check if Activation Lock is the problem here:
https://www.icloud.com/activationlock/
That link will only tell you if the iPhone is Activation Locked - it will not provide
any information about the source of the lock, nor can you get any information
from any source other than the original owner of the iPhone/person who set
the lock.
iCloud: Find My iPhone Activation Lock in iOS 7 & later
http://support.apple.com/kb/HT5818?viewlocale=en_US&locale=en_US
http://support.apple.com/kb/TS4515

How can I change the default fill and stroke colors for new shapes?

As you can see in the following screen recording, after I change the stroke and fill color, all my subsequent rectangles are created respecting these new colors. But then when I delete all the rectangles, choose the rectangle shape tool once again, and start creating new rectangles, they start getting created with another color I had used some time ago (and I don't know how did it become the default color).
http://tinypic.com/r/64jrwp/6
So how can I change the defaults, so that the fill color is say #ddd, and the shape has no stroke at all?
Thanks.

When you have the shape tool selected you will see in the tool bar below - file edit etc a fill and stroke. This is where you can change the colours.
You can keep drawing your shapes like you did in the video but then select the rectangle and change the colour from this tool bar. The reason it changes will be because you changed the colours you were using (foreground / background) that display in the left side tool bar.

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

http://support.apple.com/kb/ht5621

How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.

How can I change the default Google search engine in Firefox 8 from google.fr to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want UK based responses.
I'm using XP Pro.

You can find search engines on the Mycroft Project website.
* http://mycroft.mozdev.org/
* http://mycroft.mozdev.org/google-search-plugins.html

HT3965 How can I change the default Apple ID on and IPad?

My daughter just gave me her IPod - how can I change the default Apple ID? Every application update comes up with her email address.

Delete all the applications, sign into the iTunes Store with your Apple ID, and download the ones you want.
(98113)

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Micro

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.

See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]

I'm using bridge cc2014 on my mac and when I go to open photos, it opens on PS6 even though I have PS CC. How do I change the default?

I'm using bridge cc2014 on my mac and when I go to open photos, it opens on PS6 even though I have PS CC. How do I change the default?

Change File Associations in Mac OS X

How do I change the default apple ID that's displayed when buying or updating apps? Mine is defaulting to a no-longer-existing ID, and I don't know how to change it.

How do I change the default apple ID that's displayed when buying or updating apps? It's currently defaulting to a no-longer-existing ID, and I don't know how to change it.

Any apps you purchased with the no-longer-existing ID will always have to be updated with the password to that account, you cannot merge account purchases.
To change to your new account go to Settings > Store > Apple ID: and put in the one you want to use.

How can I change the default start up folder to be d:\work\ ?

How can I change the default start up folder to be d:\work\ ?
It seems to be going to one default folder every time I open that I didn't suggest.
I'm using Bridge CS4
Thanks ahead
Line

If the program does not open the last folder you visited you most likely have the option enabled to autoload Bridge on Startup. Either disable that option in PS or shut Bridge down before you shut off the computer.
Message was edited by: curt y
If you always want it to start on a specific folder you can leave it on autoload, go to folder you want it to start on then exit Bridge. It should load this each time in future. Many of us discourage the autoload option as it can lead to other problems as well.

How can i change the full download and install path because my C: ist full and it automaticly downloads it on C: i allready changed in on adobe creative cloud but it dont work

How can i change the full download and install path because my C: ist full and it automaticly downloads it on C: i allready changed in on adobe creative cloud but it dont work

Read the part about SSDs. Otehrwise there is nothing you can do. Certain components wil lalways install on your system root drive.
Mylenium

How can I change the default driver to OracleXADataSource in JDeveloper

Hello,
How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
And because of the JMS server I need an XA driver.
I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
Thank you.

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

How do you change the default size of the print batch size for mail merge in Publisher 2010?

I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

How do I change the default work and home addresses?

Similar Messages

Maybe you are looking for