How do I change the dpi setting when I am saving for the web?

I need to chnge the dpi setting from the default of 72 to 300 when saving for the web. How do I do that?

You go by pixel dimensions for the web because that's all that computer screens use.
dpi or rather ppi is a print specification.
In this example, Image > Image Size I have unchecked resampling and set the ppi to 300. You can see how small it's going to print on paper as opposed to maybe 100 ppi. It will still retain the same pixel dimensions.
You basically focus on a good pixel size for the the browser display.

Similar Messages

How do I change the Web App Root

During installation I made a mistake of choosing the compiled output directory as the Wen App Root, whereas it seems that it actually wanted the source directory. Consequently whenever I try to open a source jsp file I get
Unable to create this part due to an internal error. Reason for the failure:
The NitroX editor can only be used with the pages located in the Web Application Root directory.
The Web Application Root directory is the directory containing the WEB-INF folder.
The text editor is being used instead.
How do I change the Web App Root directory, I can't find a menu or preference that shows the current value or an ability to establish a new location.

Does this mean then that you are forced to have a WEB-INF folder sitting beside JSPs you want to edit with NitroX?
e.g. If my project directory structure looks like this:
project-root
|-- dist
|      |- WEB-INF
|      |- a.jsp
|      |- b.jsp
|-- web
        |- a.jsp
        |- b.jsp[/code:1:daa10af002]
i.e. I keep my JSP source code in /web but when I run my Ant build the JSPs are copied to the dist directory.
If I try to edit the files in /web using NitroX I get the error mentioned above. Does this mean I have to make /web the Web App Root directory and thus have to have a WEB-INF folder inside it?
Cheers,
mEEch

When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting?

When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting? On other computers this shows up fine so it is clearly a problem with itunes and not my ipod.

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Micro

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.

See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]

On the calender. When I set a appointment date up and it puts a little dot to show the date I saved. How can I change the color of that dot ?

When I saved a date on my calendar and it puts a little dot to remind that date. How do I change the color of that dot ?

What you're describing can't be achieved using the built-in comments summary function of Acrobat, but it can certainly be done if a custom-made script it used to generate the summary because then you're in full control of what's included in it and what's not.

HT201269 when setting up my new phone it is pulling an old email address so I cant access the app store. how do I change the email address for the app store to my current email address?

How do I change the email address on my I phone that is associated with the app store as I no longer have that email address

Manage Apple ID:
https://appleid.apple.com

How do you change the dpi settings in iPhoto

How do you change the dpi settings in iPhoto

Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

Wrong Apple ID: How do I change the Apple ID prompt when Updating All Apps?

How can I change the (wrong) Apple ID from the password prompting dialogue when I am already signed in Apple Store with my own ID?
More details of my problem:
When I try the Apps' Update-All option in my iPod 4, the password dialogue prompts me with my girlfriend's Apple ID; YET, I AM signed in the Apple Store with MY own Apple ID.
I have already verified my ID under Settings/Store. I have also signed out, signing back in with my Apple ID, just in case. No problems there, for I DO sign in with my own ID ok. The problem is just the prompt dialogue for password, when I try to use the 'Update All' feature it prompts me for password with her ID, not mine.
If I go back to Apps and choose the Categories (or Top25) menu, at the bottom of the page, it shows me signed in (my Apple ID). If I try to update one Apps it will do ok. But if I try to Update All it will prompt me for password using her ID, waiting for me to type in HER password. I cannot change the Apple ID on that dialogue (static). If I use my password, it will return the "wrong password" dialogue.
How can I change the prompt for the Update All? What is going on here that I AM signed in but my iPod prompts me with her ID. My iPod is registered under my Apple ID. I have already tried the Hard reset by pressing Home and Power buttons simultaneously, to no avail. I am also using my own network to go Online. I am also with the latest OS in my iPod and my Mac's iTunes.
Thank you!
PS This problem is not occurring in my iPhone 4 (same account) nor my Macs.

Does not work for me. (My iPhone is not jailbroken.)
I downloaded a paid app "Imray Marine Rules and Signals v1.5" in the USA with my original account (Account1) then moved countries and needed to create a new Apple account (Account2). If I get 'Info' for the app, it is registered to Account1.
A new version 1.6 of the Imray app has now been released.
I have set up only Account1 on the iphone (settings - App Store) and both Account1 and Account2 in iTunes on my computer. My iphone always tells me there is 1 app to update. However, when I try to update this app on my iphone, I get asked for the password for Account2, then the download fails as it says I do not have a paid earlier version to update.
When I am logged into my computer iTunes as Account1 and try to update it on the computer iTunes, it says there are no apps to update (although my version of the app is definitely the old version).
When I search for the app in iTune Store, it tells me I have already downloaded version 1.6 of the app and the download button is grayed out.
If I temporarily delete the app from my iTunes then try to re-download, I am asked to purchase it again.
If I log into iTunes as Account2 then try to download it, I am asked to purchase it.
Any ideas? I feel I have tried every option and no success.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.

How do i change the default hand tool to select tool when a document opens? also how do i get it to open in a single page view instead of 2 pages side by side

how do i change the default hand tool to the select tool when i open a document.
how do i change the view from 2 pages to a single page?

Try setting the check boxes in Edit>Preferences>General for the following:
- Make Hand tool select text & images
- Make Hand tool read articles
- Make Hand tool use mouse-wheel zooming
Adjust these as needed but does it make any difference?

How do you change the pink highlight for the present day in calendar when in week view

How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in. Thanks

Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.

You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.

How do i change the cursor on a jtable header when clicked for sorting?

here is my question, how do i change the cursor on a jtable header when I click the header for sorting?
I think it is suppose to be in the fragment of code where the header listener is implemented for sorting, but I'm not quite sure what is the exact component that holds everything so that i can change the cursor...
below is what I've tried, but it doesn't seem to work... thank you
public void addMouseListenerToHeaderInTable(JTable table) {
final TableSorter sorter = this;
final JTable tableView = table;
tableView.setColumnSelectionAllowed(false);
MouseAdapter listMouseListener = new
MouseAdapter() {
public void mouseClicked(MouseEvent e) {
TableColumnModel columnModel =
tableView.getColumnModel();
int viewColumn =
columnModel.getColumnIndexAtX(e.getX());
int column =
tableView.convertColumnIndexToModel
(viewColumn);
System.out.println("column = "+column);
if (e.getClickCount() == 1 && column != -1) {
System.out.println("Sorting ...");
Cursor oldCursor =
tableView.getRootPane().getCursor();
System.out.println("oldCursor.getType()
= "+oldCursor.getType());
if (oldCursor.getType() !=
Cursor.WAIT_CURSOR){
JComponent parentPane =
tableView.getRootPane();
parentPane.getContentPane().setCursor
(new Cursor(Cursor.WAIT_CURSOR));
parentPane.setCursor(new Cursor
(Cursor.WAIT_CURSOR));
Cursor newCursor =
parentPane.getCursor();
System.out.println("newCursor.getType
() = "+newCursor.getType());
int shiftPressed = e.getModifiers(
&InputEvent.SHIFT_MASK;
boolean ascending = (shiftPressed == 0);
//System.out.println("tableView.getRootPane()
is "+tableView.getRootPane().getRootPane());
sorter.sortByColumn(column, ascending);
tableView.getRootPane().setCursor(new Cursor
(Cursor.DEFAULT_CURSOR));
//System.out.println("Done sorting");
JTableHeader th = tableView.getTableHeader();
th.addMouseListener(listMouseListener);
}

Hi,
Try setting the cursor for the table header.
table.getHeader().setCursor(Wait_Cursor);
Bala.

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

How do you change the default setting in the motions tab?

Greetings!
We have two macs in our editing suite. Both are running FCP studio 2. One of the macs has a default setting for the drop shadow of 2 in the motion tab. The other mac has the default setting of 10. How can I change the default settings (not as a favorite) so that when I open a clip in the viewer the default setting will always be my preference (1.5) instead of the standard 10. I also want to change the opacity to 90% as the default.
Thanks for your help.
YmirJr

Larry, et.al.
Below is a step-by-step process for changing the default font in CS6, Illustrator, Mac, Mountain Lion, 10.8.2.
There are several additiional steps needed to make this work.
Please feel free to us this for other inquiries.
To Change Default Font in CS6-Ai-Mac-Mountain Lion, 10.8.2
On desktop menu bar, hold down Option key, go to GO, pull down to Library.
Open Application Support, ~ Adobe, ~ Adobe Illustrator CS6, ~ en_us ~ New Document Profiles
Six choices appear (you can change each that you use, one at a time)
Example: Double click Basic RGB.ai
A Basic RGB.ai blank document window opens
In Menu Bar, go to Window ~ Type ~ Character Styles
A sub-window opens with (Normal Character Style) highlighted in Blue
Double click the highlighted name and another sub-window opens
In left of this window, choose Basic Character Formats
Change to desired Font Family, Font Style, Size, etc.
Click OK when finished, widow disappears to reveal Character Styles sub-window
Click anywhere on the blank document in order to get option to Save
Save the document
Close Character Styles sub-window
Quit Illustrator
Re-launch Illustrator CS6 ~ New document … check Font tool to confirm changed default font
Hope this works for other "Lost Adobe Souls" like myself.
George

How do I change the dpi setting when I am saving for the web?

Similar Messages

Maybe you are looking for