How do I change the fps of a clip?

Hi,
I'm working on an HD project with a sequence running at 23.98fps. Most of my clips are running at this speed except for a couple which are somehow running way too fast even though the audio is at the right speed.
Is there a simple way I can change the fps of a clip?
Fingers crossed
Matt

I think you're using Final Cut Pro. This is the Final Cut Express forum.

Similar Messages

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • How do I change the speed of my clip?

    I want to know how I can tweak my clips speed to the amount I want and not the option it gives on the menu 25% 50% , 2x, 4x ...etc etc.
    Is there an option or a route around to be able to customise the amount to what you want  suc as 10% slower or 7x faster?
    I just find this fustrating that it only offers specific amounts :/
    I would be grateful if anyone could offer some help regarding the matter, thanks

    Select your clip and press cmd R to open the Retime Editor.
    Grab the little retiming  symbol (II) and drag it. You can alter the speed in 1% increments.
    As you can see, I've moved mine to 96%
    Click the image to enlarge it for clarity.

  • How can I change the speed of a clip if the speed slider is missing?

    I have read several other threads on this topic and they have not resolved my issue. I have a single clip I would like to adjust the speed for. When I click on "Clip Adjustments," the "Inspector' window only shows duration. Changing the duration does not make the closing credits roll more slowly. The clip is already part of my project, so I have no idea what else to try.
    I'm very grateful for assistance.
    Thanks.

    Ok, well you won't get a "speed scale" indicator when editing a title clip. You can only adjust duration. Now, is there music attached to the title clip? Are you adjusting the TITLE TEXT box ONLY? Try adjusting the clip BELOW Title Text box 1st, then Title Text clip.  Is the Title attached to your own video OR is it one of iMovie's default Titles??

  • How do I change the duration of all clips/ photos to under 00:00:03?

    I am making a movie from images that were rendered with Maya, a 3D software.
    When I import lets say 50 images , they all come in with a duration of 5 seconds each .
    I figured out how to slow down their duration to 00:00:03
    but I want them all to be 00:00:01, meaning, 1 frame per image, 30 images a second.
    imovieHD only allowed me to reduce the photo to have a duration of 3 frames , no less!
    How do I reduce the duration of all my photos to 1 frame or a 30th of a second?
    Please help!

    you posted in the iMHD section of this board.. which is vers. 5 (five).. you're using vers5 with 10.5. ?
    in iMHD(5), project has to be DV or any other, but not iSight/mpeg4..
    import one pic into timeline, uncheck KB, doubleclick the clip and set its duration to 00:00:00:01 .. following imports adopt these settings
    in iM08/09 (I assume, that is your version...) 3 frames is shortest.
    you need other apps to accomplish your task, QTpro, FramebyFrame, iStopmotion etc ..

  • How do you change the volume for multiple clips in one go?

    Hi all,
    Im having some trouble with audio. Im posting this in a rush so sorry in advance if its a bit muddled! Im editing snow reports with a journo piece to camera (track one lapel microphone) with overlay (track two nat sound ).
    1. is there a way to only bring in track one only and track two only from the source monitor?
    2. Is it possible to adjust the volume on multiple clips that are on the timeline (so that i can bring down the nat sound for all of the overlay track two)
        At the moment im bringing them into the timeline and adjusting them individually. I tried lowering the volume on one clip and saving it as a preset but    it wont let me.
    your help is greatly appreciated
    Paul

    Duplicate the audio once editing is done.  In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other.  Then adjust the mixer appropriately.

  • How do i change the size of a clip using batch export?

    hi, when i try and do a batch export to change my clips from a DV PAL to PhotoJpeg 320*240 sized clips the "options" button is greyed out. so all i have as export settings are the QT presets in a pulldown list. is there any way i can create my own setting? (and the also save that?)
    thx

    what i'm seeing is that
    a) selecting all files in Media Man. gives me the option to size and set codecs but not the audio off.
    b) selecting all files in Batch Export allows me to pick a format (QT, aiff etc) choose a preset (photoJpeg included) select whether to include audio and video or both but not set the size or customize the QT settings
    c) selecting all clips then "file>export>using QT conversion" gives me all options, but seem to grab only the first clip.

  • In the latest version of iMovie how do you change the duration of the clips

    In the latest version of iMovie how do you change the duration of each clip?

    Try 'window' (in the menu bar)>movie properties>settings
    http://help.apple.com/imovie/mac/10.0/#mov4e66c1a8b

  • How can I change the frame rate mode?

    Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video  has a constant frame rate...

    Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
    I analyzed the video with "mediainfo":
    General
    Format                                   : MPEG-4
    Format profile                           : Base Media / Version 2
    Codec ID                                 : mp42
    File size                                : 2.00 GiB
    Duration                                 : 20mn 13s
    Overall bit rate mode                    : Variable
    Overall bit rate                         : 14.2 Mbps
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:58:30
    ©TIM                                     : 00:00:00:00
    ©TSC                                     : 30
    ©TSZ                                     : 1
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 3 frames
    Format settings, GOP                     : M=3, N=30
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 20mn 13s
    Source duration                          : 20mn 13s
    Bit rate                                 : 14.0 Mbps
    Width                                    : 2 560 pixels
    Height                                   : 1 440 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Variable
    Frame rate                               : 30.000 fps
    Minimum frame rate                       : 30.000 fps
    Maximum frame rate                       : 30.030 fps
    Standard                                 : PAL
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.127
    Stream size                              : 1.98 GiB (99%)
    Source stream size                       : 1.98 GiB (99%)
    Language                                 : English
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:56:13
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    mdhd_Duration                            : 1213733
    Audio
    ID                                       : 2
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 40
    Duration                                 : 20mn 13s
    Source duration                          : 20mn 13s
    Bit rate mode                            : Variable
    Bit rate                                 : 158 Kbps
    Maximum bit rate                         : 254 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 44.1 KHz
    Compression mode                         : Lossy
    Stream size                              : 22.8 MiB (1%)
    Source stream size                       : 22.8 MiB (1%)
    Language                                 : English
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:56:13
    mdhd_Duration                            : 1213777
    And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec 

  • How do you change the speed of a detached audio clip?

    I have a piece of detached audio.  Video Frame rate is 23.98.  The piece of Video above it is Video Frame Rate 24.
    How do I change the speed of this detached audio clip?

    Nope, the Automatic Speed did not work.  I exported the XML, and then ran it through X2Pro to try and get my AAF, and it still spits out conform warnings/errors on those same spots.  Automatic Speed apparently did nothing helpful to my situation.  (Can Anyone explain Automatic Speed?)
    Will have to try going through Cinema Tools per the similar issues noted in this conversation: http://forums.creativecow.net/thread/344/28007
    Curious to see what FCPX would do with this media, importing the 24p file to a 25 Project cause a noticeable shift in both time and pitch.
    I imported the time coded audio separately, and played it against the obviously speed and pitched changed video with embedded audio. The files did not sync.
    The audio remained in time and pitch, while the video didn't. So the audio tc doesn't seem to effect playback in FCPX, but video definitely does, and it seems rather buggy.
    So, if your video is 24.0 and your audio is 23.98 and you are in a 23.98 timeline, FCPX might be changing the speed of the video without really reporting it. Resetting speed doesn't do anything, hitting "automatic speed" screws it up a bit more (it goes the wrong way). Changing the speed to something like 96% (FCPX reports 96% but I know it's really ((24000/1001)/25) which is just short of 96%. Turning off the "preserve pitch" checkbox actually pitched the audio back to normal.
    I didn't create the 24.0 vs 23.9 media that you have, but perhaps you are having similar issues, or a different combination/permutation therein.
    But to answer your question, the time coded audio was not changed, only embedded audio.
    and
    But here some notes which makes things hopefully clearer.
    Resampling and changing playback speed are two totally different things.
    Samplerate for audio is the same as fps for video (not dpi for video) so let's call it sps.
    You can record audio at any sampling rate. But let's take 48 kHz and 32 kHz here.
    Record 60 seconds. Once recorded both files as stand alone files will play 60 seconds.
    But forced to play back in a NLE timeline with a fixed sps of 48 the first file will playback correctly. The second one will play at 2/3 of the time (32/48). The other way round the 48 sps file will play longer in a 32 sps timeline.
    Now for those poor guys who have to work with NTSC:
    A real world second is not a second in NTSC video world. Its 1001/1000 seconds.
    So selecting a 48k sps audio preset in a timeline preset means that a real world audio of 60 seconds is only 1000/1001x60. That means that those 60 seconds are only 59.94 seconds long. Its too short.
    One way - if you stay strictly in NTSC - is to record audio with 48048 Hz. This way a real world 1 second audio will match a 1 second NTSC video.
    Next option with BWAVE files is to change the playback settings in the BEXT header of the file. This won't resample the file!!!
    Now about the TC. BWAVE doesn't have a TC in a way you're used when handling video. It has a timestamp in the header. This timestamp contains the Samples after Midnight. Based on that the NLE will convert this to TC which can be displayed. So in NTSC world this might give a wrong interpretation.
    For example if you have a "Start TC" of 00:10:00:00 (thats what you see on your audio recorder) it means that using 48kHz the timestamp is at 600x48,000 = 28,800,000 samples. Since the real sampling rate in the timeline though is 48048 Hz you have to divide the source stamp by this number. This results in 9.99000999000999 minutes. So for a 23.976 fps project this is a TC of 00:09:59:10.
    So setting the Bext header and/or iXML chunk to the correct playback speed will keep everything intact. Again this is without resampling!
    Using an AIFF there aren't these options.
    So you can edit all the stuff without resampling when using BWAVE. But resampling will happen when you export a final movie.

  • CHANGING THE FPS IN ELEMENTS 10?

    Recently i have been using Adobe Premiere elements 10 and have been planning on making a timelapse or stopmotion film i have about 1000 images and need to set the frame rate to around 15fps or 10 fps i have no found these options only options for video like 25fps whick is too fast so i need to know how to do this, i have tried going project settings and general and tried to do it their but with no triumph i would be very grateful if someone could help me here on this query that baffles me.
    Thanks

    You cannot change the fps settings of any project. That is pre-defined for each project setting in PRE.
    But as Bill and Steve said, what you want to do is, change the duration of your still images. Before importing all your images, first change the still duration setting Preferences->General. then import your images.
    If you want to have different duration settings for different images. You should import images in group.
    Say, among those 1000 images, you want to import 500 images of 3sec duration and the other 500 images of 2 sec duration, what you should do is, first set the still duration to 3, import first set of 500 images and then change the still duration to 2 and then import the next set.
    Good Luck,
    Aniks

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • In Pages 5.0 How do I change the highlight color?

    In Pages 5.0 How do I change the highlight color?

    Oh!  I understand now.  See screenshot below.  It's called "Character Fill Color":

  • In the Menu Bar, under File, then Open File, how do I change the selections?

    I have Firefox 11.0 and Windows 5.1 (2007). In Firefox, I click on FILE in the Menu Bar, then OPEN FILE (Ctrl+O), and I see a small box; it says Look in: Mozilla Firefox. Below is a selection of files within the folder Mozilla Firefox. To the left is a column of four other folders: Downloads, My Computer, John, Lori. The last two are obviously two of the folders I've created on my computer, using Windows. But I don't know how they got here! I have no recollection of customizing this particular Firefox menu option by adding those folders, nor can I figure out what to do in order to further customize it. Can anyone tell me: (1) how can I change the original "Look in" option so that it opens with something other than "Mozilla Firefox" (which, after all, I never need to access)? (2) how can I add/delete/change the choices offered in the column on the left, so that different folders are listed? (Currently, if I want to access my Windows folders/files, I first have to minimize the Firefox screen; this seems to me a nice shortcut, but I'd like it to include shortcuts to the folders I use the most, which does not include "Mozilla Firefox"!) (3) Is this actually a Firefox feature, or is it a Windows feature? It does look like Windows (Windows style, Windows folders), but it appears only in the Firefox Menu Bar, along with Bookmarks, Tools, etc. Thanks!

    This sounds like a Windows thing ( You can post a photo and I can tell you for certain). Those folders are Windows system created folders that your computer has had since it was installed, all Firefox does is use the Windows File picker, which is what you see when you open that window. So, to customize you'd have to do that from Windows Explorer (not Firefox).
    The Window should however remember what folder you were in last.

Maybe you are looking for