How do I change the function of the Run button?

I recently got a new hard drive and had to install all of my National Instruments software
Now, the Run button in TestStand only runs the selected sequence. How do I change it back to Single Pass execution of the process model and MainSequence?
Solved!
Go to Solution.

Right Click on the run button and choose Customize...
Now Click on the Commands tab and click the Rearrange Commands button.
Click the radio button next to Toolbar: and choose Debug from the dropdown next to it.
Select the Command with the Green Arrow and click the Delete Button.
Now click the Add button and select Execute under Categories:
Under Commands: scroll until you find the one you desire. In this case Second Execution Entry Point. You will have to repeat the add for other buttons.
Highlight the one you want and click OK.
Click Close and Close when you are finished.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

VERY Disappointed-just upgraded from 12 to 13 and the functionality of the Organizer has completely changed

I have been a long time user of Photoshop elements/Premier and I just loaded version 13 (from 12) and they have completely changed the functionality of the organizer! OMG!!!!! You can no longer move a picture easily in the albums and you MUST use one of the Adobe preset backgrounds for a slide show. Really??? Generally I like the templates for certain uses but I am creating long movies of travels. I do NOT want your backgrounds, but apparently I have no choice. And I can no longer interface with Premier - then why did you sell them to me as a package?
I am sure I can't get my money back because I did a direct download but I have uninstalled the program and gone back to version 12 - BUYER BEWARE if you have been using Premier with the organizer it will not work seamlessly. Such a disappointment because a good and generally well functioning program has been butchered. .

I've just looked to buy iCab as people have suggested but reviews suggest it doesn't work reliably since IOS5.
Frankly I feel cheated and I've been a historic fan since having an Apple IIci 20 years ago. A major plus point in iPad usability has gone. Funilly enough I was about to recommend 25 iPads as Safari was so useable and the users I had in mind having seen my iPad were keen. But I couldn't hand on heart recommend iPads now and after seeing how Apple drops key functionality and usability wouldn't trust this supplier. Guess I'm glad I didn't recommend them and then have this happen.
And if I want tabs I'd have gone with Andriod for half the price.
It wouldn't be so bad if I could reverse the upgrade.
Anyone know how to cheat the system?

How can I assign a function to the on/off button on my imac?

The on/off button on my imac used to turn the computer off. After a re-install, now the button just turns the computer to sleep mode. I don't remember how I had reassigned the function to the on/off-button on my imac. Any solutions? Thank you very much!

Hello,
Try System Preferences>Energy Saver>Options tab, uncheck Allow power button to sleep computer.
Some possible other options...
Control-Eject
The dialog box "Are you sure you want to shut down your computer now?" appears with options to Restart, Sleep, Cancel or Shut Down. After the dialog appears, press the R key to Restart, press the S key to Sleep, press the Esc key to Cancel, or press the Return key to Shut Down.
Control-Command-Eject
Quits all applications (after giving you a chance to save changes to open documents) and restarts the computer.
Control-Option-Command-Eject
Quits all applications (after giving you a chance to save changes to open documents) and shuts the computer down.
Command-Option-Eject
Puts the computer to sleep.
Shift-Control-Eject
Puts all displays to sleep.
Power button (if the computer is not responding)
Press and hold the power button on the computer for six seconds to shut down the computer.
http://support.apple.com/kb/ht2448

Change the functionality of the keyevents according to the scene that it i

I am a student and I am doing my tesis about authoring tools.
I have obtained to give the same functionality to a keyevent for all the scenes, however, I am trying to change the functionality of the keyevents according to the scene that it is at the moment but I dont know how to do this.
can anybody help me???

Thanks for your help.
Could you help us in a specific issue? We have three scenes. Hscene_1, Hscene_2, Hscene_3. Pressing the green button we want that; if I am in the Hscene_1 it passes to Hscene _2 and if I am in Hscene_2 it happens to me to Hscene_3
we are waiting your answer.
Thanks

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

How can I change my visa on the apple account

How can I change my visa on the apple account

A number of ways to do this, but on the iPad:
Open the iTunes app ans select any of the product categories at the bottom (music, for example).
Scroll down and then tap on the button with your AppleID
Tap View ID
Login
Select Payment information and edit the info, then save

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

My Apple ID and rescue email are reversed. How can I change them both at the same time

My Apple ID and rescue email are reversed. How can I change them both at the same time?

I'd already used this standard tool (exhaustively!), but for the problem encountered it operated in Catch 22 mode - you had to do two things but neither order was permitted. I did find an answer eventually, but am not sure what it was I did that solved it! Thanks, anyway.

I have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

i have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

Select the Zoom Tool in the tool box and see if Scrubby Zoom is unchecked or greyed out in the tool options bar.
(you want Scrubby Zoom checked)

The function of the F keys at the top of my keyboard no longer work as they used to. How do I restore their old function?

The function of the F keys at the top of my keyboard no longer work as they used to. The actions they do no longer correspond to the symbols that are printed on them. For example, the volume buttons no longer control volume and now change the display to full-screen instead, and the brightness buttons don't do anything at all.
This started today and I'm finding it very irritating. I checked in System Preferences and didn't find any obvious way to turn most of them back to what they used to do.
Help?

In System Preferences > Keyboard uncheck Use all F1, F2, etc. keys as standard function keys.

How do I change default settings in the author field when I edit or insert a comment in a PDF?

How do I change default settings in the author field when I edit or insert a comment in a PDF?

Generally it gets this info from the Identity in the preferences. Unfortunately, I know of no way to change the Login Name that shows up in the comments. I need to look at newer versions of Acrobat on other machines, this is AA8.

How do I change a field in the sum in ALV (List or grid)

My alv, for example:
1.10
2.30
1.50
Sum(DO_SUM) : 4.90
But I need to CEIL( 4.90 ) before showing .
It should be shown as 5.00 in alv.
How do I change this field in the sum ?

Use the following code in a PBO module or in an adequate event method
data: total type ref to data,
      subtotal1 type ref to data.
field-symbols: <total> like gt_sflight,
               <subtotal1> like gt_sflight.
call method grid1->get_subtotals
importing
    ep_collect00 = total
    ep_collect01 = subtotal1.
assign total->* to <total>.
assign subtotal1->* to <subtotal1>.
Look at [ALV Grid Control (BC-SRV-ALE)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf]
Regards

How do I change a character in the document to another character in one command?

How do I change a character in the document to another character in one command?

You mean everywhere? Use Find/Change

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!

I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

HT1677 iOS 7 for iPad the bookmarks tab is now on the top right hand side how can I change this back to the top left hand side as in the previous versions?

iOS 7 for iPad the bookmarks tab is now on the top right hand side how can I change this back to the top left hand side as in the previous versions? Thanks

Sorry but you can't

How do you change image size in the title window?

I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
>

How do I change the function of the Run button?

Similar Messages

Maybe you are looking for