How do I change the height of my tabs so that they reach the top of the browster interface?

Today for some reason I found that my tab sizes changed slightly so that moving my cursor to the top of the page misses the tab as there is now a bit of space above them. This applies to regular browser tabs as well as the Firefox tab, and is rather annoying. How do I get rid of this bit of space so the tabs reach to the top of the browser again?

This issue may be caused by an add-on installed on Firefox.
Please '''try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Similar Messages

How can I change the language interface of Firefox 4 Beta to English (on Swedish OS)? Can only find different language versions for 3.6.8.

How can I permanently change the language interface of Firefox 4 Beta to English?
Computer is running on Swedish Windows XP.
Found that the advice on similar questions is to install the language version of the desired language on top of the current version but I haven't found different language versions for 4 Beta, only 3.6.8.
Have also tried to change general.useragent.locale (about:config) to en-US but to no avial.

Hello,
If somebody has installed the multi-language package is there a possibility the language to be changed without reinstalling the browser?
Best regards,
Yuli

How do I change the illustrator interface to be like photoshop?

I dont like how in illustrator there is a window where your project is and all the panels for the program are strewn across your desktop. I like the photoshop style better where the entire program is contained in one window. Is there a way to make it like this? What is the advantage of the other way?
Thanks in advance,

Window > Application Frame.

How do you change the height of a cell in the Bookmark tab?

How do you change the height of a cell in the Bookmark tab?

This does seem likely to be related to Mavericks:
http://forums.adobe.com/message/5800367
https://discussions.apple.com/thread/5491326
https://discussions.apple.com/message/23548199#23548199
So far there is apparently no solution, other than upgrading. (It does seem that upgrading your Reader will at least let you view the PDFs normally, even if editing them in 9 is still annoying.)

How can I change the height of the input box in a...

How can I change the height of the input box in a new version of Skype?
Solved!
Go to Solution.
Attachments:
Skype_input_box.png ‏4 KB

lucasbgme wrote:
I've tried 6.1.0.129
6.1.0.129 version is disabled. All Skype versions older than 6.14 are now retired and can no longer be used. You can try to install the 6.21.0.104 version:
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi

How Do I Change the Padding in Table Cells

Hi, I am trying to set up a table that will allow text to fill the entire cell. I know that if I double click an individual cell, the left and right boundaries of the cell will be displayed on the ruler. However, I can't select multiple cells (even in a column) to adjust the boundaries. By default, all cells are created with no padding on the left, but half an inch on the right. I want no padding on the right as well. I know I can change the the tab for the table with the text inspector, after the fact.
So, #1. How can I change the default right cell wrap for all cells in a table?
Additionally, I know how to get rid of the padding above the text (via text property "instant margins"), but I also need to eliminate the padding at the bottom of the text. When I adjust the instant margin, it just moves the text the upper-left corner of the cell, but does not change the vertical size of the cell. I can change the individual row height by grabbing the border and dragging it up, but, again, this is a pain for large table. I know I can also change the overall cell height by dragging the lower table boundary.
#2. How do I change the default cell height so the cell is tight against the text, regardless of the font size, for all cells in a table?
Any help or suggestion will be greatly appreciated.
Thanks
Gary

Thanks for the reply.
Unfortunately, those options will not do what I need.
If I turn off "Wrap text", the text overflows the cell and the text in the adjacent cell to the right will hidden. I still want the text to wrap, just not half an inch from the right border.
And the "Resize to fit" changes the cell width, which I want to keep the cell at a static width.
One workaround I found, was to modify the table as needed, using text properties, and then save the table as the table default. Unfortunately, that overwrites the factory default, and new table's tabs in other templates (all other properties seem to be retained)
The second option that seems to work, is to save my entire document as a template. That seems to hold all the properties for graphics, tables, etc.
A bit kludgy, but those methods seem to do the trick.
Now, how do I get the default table properties back?
Gary

How can I change the insert SWF File, I need to add a few things and make it better?

How can I change the insert SWF File, I need to add a few things and make it better? Is there an option inside of the dreamweaver menu that I am not looking at. It would make it easier on me if I changed some things around and didn't have to do it all myself each time I used it. Just incase you was needing to remember what swf flash was, It is not a swf video either.
<object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="640" height="480">
    <param name="movie" value="Sonic Kaboom.swf">
    <param name="quality" value="high">
    <param name="wmode" value="opaque">
    <param name="swfversion" value="9.0.115.0">
    
    <param name="expressinstall" value="../Scripts/expressInstall.swf">
    
    
    <object type="application/x-shockwave-flash" data="Sonic Kaboom.swf" width="640" height="480">
      
      <param name="quality" value="high">
      <param name="wmode" value="opaque">
      <param name="swfversion" value="9.0.115.0">
      <param name="expressinstall" value="../Scripts/expressInstall.swf">
      
      <div>
        <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
        <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
      </div>
      
    </object>
    
</object>
</div>

If I understand correctly, Sonic Kaboom.swf needs to be edited in a separate Flash authoring program and then reinserted into your HTML document.
As Murray said, Flash is dead. Nobody uses it anymore.   We use HTML5, CSS3 and JavaScript animations which have universal support from Smartphones, Tablets and other web devices that can't support Flash.   Look at Edge Animate.
HTML animation | Download free Adobe Edge Animate CC trial
Nancy O.

How can I change the frame rate mode?

Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...

Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 2.00 GiB
Duration                                 : 20mn 13s
Overall bit rate mode                    : Variable
Overall bit rate                         : 14.2 Mbps
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:58:30
©TIM                                     : 00:00:00:00
©TSC                                     : 30
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Format settings, GOP                     : M=3, N=30
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate                                 : 14.0 Mbps
Width                                    : 2 560 pixels
Height                                   : 1 440 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Minimum frame rate                       : 30.000 fps
Maximum frame rate                       : 30.030 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.127
Stream size                              : 1.98 GiB (99%)
Source stream size                       : 1.98 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
mdhd_Duration                            : 1213733
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 158 Kbps
Maximum bit rate                         : 254 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 22.8 MiB (1%)
Source stream size                       : 22.8 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
mdhd_Duration                            : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec

How do you change the direction of a Tween Wipe effect

Hi all,
Completely new to the forums and I hopefully my query is straight forward. How do you change the direction in the pre-built tween effects available within Flash CS3 (primarily the Wipe effect). Example code:
var Animate_Box:Tween = new Tween(Box, "height", Strong.easeInOut, 0, 200, 1, true);
OR
var Animate_Box_2:Object = {type:Wipe, direction:Transition.IN, duration:1, easing:Strong.easeInOut};
TransitionManager.start(Box_2, Animate_Box_2);
Many thanks in advance.
Kam
ANSWERED:
Sorry for posting something so pointless!
You simply add 'startPoint:5' onto the end i.e.
var Animate_Box_2:Object = {type:Wipe, direction:Transition.IN, duration:1, easing:Strong.easeInOut, startPoint:5'};
TransitionManager.start(Box_2, Animate_Box_2);
startPoint:5' = can be any number depending on the direction of the Wipe you want.
Thanks,
Kam

What you really want is a way of automatically mirroring the the X and/or Y coordinates of the keyframes within the effect. This ability would be very useful.
But right now there's no way to do that. You'd have to do it manually. That effect actually uses the Slide parameter to generate the movement (instead of a discreet X/Y coordinate for the position.) Changing the first keyframe value of the Slide parameter to a negative number still doesn't give the effect I think you're looking for.
So, it's probably easier to just rebuild the effect the way you want it from scratch.
Bony

How do you change the spacing between lines of text?

using Dreamweaver 6 how do you change the spcing between lines of text. Not seeing it as a option in the page properties menu.

Try CSS line-height property.
Kenneth Kawamoto
[link removed by moderator]

How do I change the image size by pixels

In the older version of photoshop you could change the image size and change it by pixels independently. With photoshopcc if I change the width the height changes. How do you change the 2 values independently to get the desired size?

You'll want to use the Camera icon to upload your screenshot images when you reply.
But jml007 has the answer I think you want. Change the units from inches to pixels and click on the chain link to turn it off and enter your W H values independently.
Mark his answer as correct if this solves your issue.
Gene

How do I change the color of a JSCrollBar

Hi all,
How do I change the color of a JScrollBar. I was able to change the color of the background, but not the scrollbar itself.
Can anyone help?
Thanks,
R.

Hi,
Thanks for all your help. I actually found the sun bug report about this problem. The fix is to create a class for the JScrollBar extending JComponent and then override the setUI method.
Here is the code for anyone who needs it:
/* class custom JScrollBar **/
class myScrollBar extends JScrollBar
public myScrollBar(int orientation){
super(orientation);
public void setUI(BasicScrollBarUI ui) {
super.setUI(ui);
/* class MyUI**/
class MyUI extends BasicScrollBarUI
Color barColor = new Color(51,172,49);
Color bgColor = new Color(245,245,245);
protected JButton createDecreaseButton(int orientation) {
return new ArrowButton(orientation);
protected JButton createIncreaseButton(int orientation){
return new ArrowButton(orientation);
JButton up_button = (JButton)createIncreaseButton(SwingConstants.NORTH);
JButton down_button = (JButton)createDecreaseButton(SwingConstants.SOUTH);
JButton left_button = (JButton)createDecreaseButton(SwingConstants.WEST);
JButton right_button = (JButton)createIncreaseButton(SwingConstants.EAST);
protected void paintThumb(Graphics g,JComponent c,Rectangle thumbBounds)
g.setColor(barColor);
g.fill3DRect((int)thumbBounds.getX(),(int)thumbBounds.getY(),
(int)thumbBounds.getWidth(),(int)thumbBounds.getHeight(),true);
protected void paintTrack(Graphics g,JComponent c,Rectangle trackBounds)
g.setColor(bgColor);
g.fillRect((int)trackBounds.getX(),(int)trackBounds.getY(),
(int)trackBounds.getWidth(),(int)trackBounds.getHeight());
* ArrowButton is used for the buttons to position the
* document up/down. It differs from BasicArrowButton in that the
* preferred size is always a square.
private class ArrowButton extends BasicArrowButton {
public ArrowButton(int direction) {
super(direction);
public void paint(Graphics g) {
System.out.println("i am inside the button paint");
g.setColor(new Color(51,172,49));
g.fill3DRect(0, 0, this.getSize().width, this.getSize().height, true);
int w = this.getSize().width;
int h = this.getSize().height;
int size = Math.min((h - 4) / 3, (w - 4) / 3);
size = Math.max(size, 2);
g.setColor((new Color(0,0,0,0)).darker());
paintTriangle(g,(w - size) / 2,(h - size) / 2,size+1,this.direction,true);
public void paintTriangle(Graphics g,int x,int y,int size,int direction,boolean isEnabled){
g.setColor((new Color(0,0,0,0)).darker());
super.paintTriangle(g,x,y,size,direction,isEnabled);
public Dimension getPreferredSize() {
int size = 16;
if (scrollbar != null) {
switch (scrollbar.getOrientation()) {
case JScrollBar.VERTICAL:
size = scrollbar.getWidth();
break;
case JScrollBar.HORIZONTAL:
size = scrollbar.getHeight();
break;
size = Math.max(size, 5);
return new Dimension(size, size);
in init():
//setting the scrollbars
MyScrollBar vertical = new MyScrollBar(JScrollBar.VERTICAL);
MyScrollBar horizontal = new myScrollBar(JScrollBar.HORIZONTAL);
horizontal.addAdjustmentListener(new ScrollHandler());
vertical.addAdjustmentListener(new ScrollHandler());
vertical.setUI(new MyUI());
horizontal.setUI(new MyUI());
vertical.setBorder(BorderFactory.createLineBorder(grayColor));
horizontal.setBorder(BorderFactory.createLineBorder(grayColor));
scrollPane.setHorizontalScrollBar(horizontal);
scrollPane.setVerticalScrollBar(vertical);
I hope it helps others.
R.

How do i change the line spaces?

How do i change the line spaces?????

CSS line-height = space between lines.
CSS margin-top = space above the element.
CSS margin-bottom = space below the element.
h1 {
margin:0;
line-height: 3em;}
p {
margin:0;
line-height: 1.5em
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

How do I change the compatibility view so that my words are not running off the page?

I do data entry and in the system I am working on the words are running off the page. In internet explorer there is a little broken page on the tool bar that lets you change the compatibility and I am not finding anything like that with firefox. Please advise how I can change the setting so that the words will wrap correctly.

As far as I know, Firefox doesn't have a similar compatibility feature.
I assume this system is not accessible to forum volunteers, so I'm going to ask you to do a little sleuthing. I assume you are entering text in a multi-line textbox (an HTML <textarea> control). Could you do the following:
* Have your text entry form open in one tab, and a reply to this thread in another tab.
* Right-click in the control that doesn't wrap and choose Inspect Element. A small pane should open with part of the HTML highlighted in blue.
* Right-click the highlighted <textarea> tag and choose Copy Outer HTML.
* In your reply tab, paste the HTML, and remove the leading < character to avoid messing up your post. This will show any legacy settings on the tag that might be affecting how it wraps.
Here's an example using this very box:
textarea style="width: 567px; height: 616px;" rows="10" name="content" required="required" placeholder="Enter your reply here." cols="40" id="id_content"></textarea>
If it's not a textarea, then that would be useful to know as well.
* Back in your form, you may or may not have a pane to the right that shows various style rules. If not, click the Style button at the lower right to open it. Look for any rules with the '''white-space''' property (the properties normally appear in colored text). If you find one, right-click and choose Copy declaration line. Switch back to this tab and paste the rule.
With that information, hopefully we can find a workaround.

How do I change the spacing between lines in Pages 5.5.2? Single spacing prints more like double spacing.

How do I change the spacing between lines in Pages 5.5.2? Single spacing prints more like double spacing.

In the Format panel under the Text Style tab, there is a ▸ Spacing category. Click it to open, and you will have a selector that defaults to Lines, and to the right, the ability to set your spacing in decimal values. In addition to Lines, you also have At Least, Exactly, and Between capability. You can even set exact line height in points. Check that your Before Paragraph, and After Paragraph settings are correct for your needs.

How do I change the height of my tabs so that they reach the top of the browster interface?

Similar Messages

Maybe you are looking for