How do I change the image size by pixels

In the older version of photoshop you could change the image size and change it by pixels independently. With photoshopcc if I change the width the height changes. How do you change the 2 values independently to get the desired size?

You'll want to use the Camera icon to upload your screenshot images when you reply.
But jml007 has the answer I think you want. Change the units from inches to pixels and click on the chain link to turn it off and enter your W H values independently.
Mark his answer as correct if this solves your issue.
Gene

Similar Messages

How do I change the image size in Save for Web?

I just upgraded to Illustrator CS6 on a PC. I try to save my graphic in Save for Web and want to alter the image size, but it won't change, it just goes back to the original size. If I change the percentage box, the values change. I have tried linking and unlinking the proportions and nothing. What am I missing?? I don't have time to guess the percentage to get to the exact width I need.

Make changes in the Image Size section of the Save for Web. Input new values in Width and press Tab key to move to Height field. Click on the Link icon to unconstrain proportions. As you press the Tab key again to go out of focus of the Width and height boxes, you will see the changes reflect inside the Save for Web window. If this doesn't work then make sure you have updated Ai to 16.0.1 or 16.1.0 depending on the type of installation (from Disc or from Creative cloud) respectively.

How do you change the image size and resolution in photoshop everytime I change the width the height changes my measurements will not stay

Can someone assist me with changing image size and resolution. each time I change the width the height changes and vice/versa?

There's a chain link between width and height. The point is to keep the aspect ratio the same, otherwise your picture would get stretched.
You click on the chain-link to shut that off and you can adjust width and height separately.
Also could you give us your version of Photoshop, what OS you are running it on (Windows 7 for example) and what exactly you want to do with your document?
Resolution is the print term for how many pixels will be printed on an inch of paper. It doesn't apply if your image is intended for screen viewing.
Gene

In A2500, how to change the Image Size?

I have an A2500 camera. The images are great, but they're huge (1.5mb each) and fill up my memory card way too quickly. How can I use the camera's menu settings so images are stored in a smaller size?

Hi TravelMark!
Thanks for posting!
To change the image size, please press the <FUNC/SET> button. select the [L], then change that to [M1] or [M2].
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to change the maximum frame rate of the camera by changing the image size?

I have two acA2040-180km cameras which are connected to 2 NI PCIe-1433 framegrabbers, I am monitoring my cameras by LabView, maximum allowable frame rate is about 187 for full resolution images, but I just need a small fraction of the images, I know if I make the images smaller, FPS will get higher, but it isn't possible by changing the image size in NI MAX, I've also tried to change the size by defining the region of interest in the grab setup.vi, but it would be after going to camera so it isn't the case as well, so I need a VI to go to the camera before starting to take photo and define the region of interest which is going to be captured, would you please help me to find it?
Please help me, this problem get me stuck!!!

Have you tried changing the image size using property nodes as Bruce suggested? Do remember with Basler cameras, reducing the width only will not affect the transfer speed but the reducing the height will. Have a look at the frame calculator to understand what you frame rates you can acheive with certain settings:
Basler Frame Rate Calculator
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How can I change the font size and placement of photo descriptions in an iPhoto slide show?

With an iPhoto slide show, how do I change the font size for titles and descriptions and position the text when preparing a slide show?

to change the pixels crop to 100x100 and export with maximum dimension of 100 - see the user tip on exporting foo details on Export options - Exporting From iPhoto
As to DPI - digital photos have no DPI since DPI is Dots Per Inch and digital photos have no inches hence no DPI - when you print a photo then DPI is a mathematical calculation - dots divided by inches - it is not a setting
Print a 480 pixel photos as a 1" square and the print it 480 DPI (480 / 1 = 480) and print the 100 pixel image as a 1" square it will be 100 DPI (100 / 1 = 100) - print a 480 pixel photo as a 4.8 inch square and it is 100 dpi (480 / 4.8 = 100) - just a calculation - not a setting
LN

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How do I set the image size in PS touch to print to my Epson printer w ithout losing any of the picture. PS Touch appears to be showing pixels and not inches, how can I covert it toshow inches?

I am using PS Touch from my tablet . I am importinga photo from an SD card . When all editing is completed I then send it wireless from the tablet via Epson I print to the printer. It all works great except that part of the photo at each end is cut off and does not print. I am printing on 8.5 x11 paper.
How do I convert the image size in PSTouch frm pixels to inches?

Epson's iPrint has always been an oddball. It will always "zoom in" on an image to print even if you have the proper dimensions and resolution set for actual print size. I think other users have reported this, at least on Android.
You can't have PS Touch show inches instead of pixels at this time but you can use an online website to find out what you need to fit within a particular resolution. (Google "pixels to inches calculator".)

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

How can I change the page size of a pdf so i can view it on my iphone more clearly?

How can I change the page size of a pdf so i can view it on my iphone more clearly?

I think there may be more to this question than you say.
If your PDF page is say, 8 x 12 inches, and you found a way to scale it to 25%, changing it to 2 x 3 inch, shrinking everything on the page to quarter size - wouldn't it look exactly the same on the iPhone? It's just going to be the same as zooming.
Or were you hoping for something more like in Word, where changing the page size keeps everything the same size and spreads it over more pages? That isn't something you can do.

How do I change the font size of a document when I PRINT?

How to I change the font size of a document when I print it?

To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
- Dov

How can I change the page size of a scanned PDF document?

How can I change the page size of a scanned PDF document?
I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
I'm using Preview Version 4.2.

Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

How do you change the default size of the print batch size for mail merge in Publisher 2010?

I appended this question to another thread with the same topic but have not received a reply, so I'll try with a new question. Publisher 2010, when doing mail merge, will only merge and print two records at a time. How do you change the default size of
the print batch size? This is for a 4 page document, 8 1/2 x 11, printed two sides on 11 x 17. I've tried all the suggestions that were in the other thread. The response that was marked as the answer by the moderator is incorrect and does not work. Nothing
suggested in that thread works. A registry fix that worked for Publisher 2003 won't work because the print batch size key does not exist in the registry for Pub 2010. At least not that I can find. Printing to an XPS document doesn't work. It asks for a filename,
prints 2 records, asks for new file name, prints 2 records, asks for new file name, and so on. The same for printing to a PDF document. Merging to a new Pub document doesn't work. When I print that job every other sheet is turned over. I.e., sheet one has
pages 1 & 3 on top, next sheet has 3 & 4 on top, and so on. This makes it impossible to run them through the folder. The same thing happens when I print that complete merged document to XPS or PDF. I have the latest drivers installed for our printer, a Toshiba
2500C copier/printer connected via network. What do I need to do to to change the batch size to something reasonable, like 100 records?

It's been two weeks since I posted this question. What does it take to get an answer? I cannot believe it's being ignored, nor can I believe that someone in MS doesn't have an answer.

How to find out the image size?

How to find out the image size values(Width and height) in illustrator CS3 using any script. I tried but i got only the document height and width. I need to find out the image BoundingBox value of width and height. Kindly advice me.

Try this.
tell application "Adobe Illustrator"
set heightImage to get height of raster item 1 of current layer of current document
set widthImage to get width of raster item 1 of current layer of current document
display dialog (heightImage & " X " & widthImage) as string
end tell
JaiMS

How do I change the font size and color in a text box?

How do I change the font size and color in a text box?

Really frustrating to find the first time but simple once you figure it out. I think I spent hours trying to find this. Simply right click on a blank spot in the toolbar up top and select Properties Bar. There it is! The available properties will change depending on whether you have the content (text) selected or the box itself.
I haven't found a way yet to make it show up as a regular part of the toolbar. It floats around and gets in the way so I don't leave it on and then have to open it again when I need it. Again - frustrating; but at least it's there!

How do I change the image size by pixels

Similar Messages

Maybe you are looking for