How do I change the layer mask thumbnail to be a thumbnail of the image itself ?

Hello,
I am in Photoshop CS5 in Windows, and I have been using Photoshop for sometime now. I am not sure what I did, but for the last few days, in my Layers Pallette, the thumbnails that show up look different.
I have attached a small screenshot from my photoshop below. Here in Layer 1, the thumbnail in the left (brush ) used to be that of the image open , and the thumbnail in the right used to be the grayscale indication of pixels that have been selected. Any idea how to revert it back ?

Hi slaveofphoton,
Go to the Layers Panel Options and choose a thumbnail size other than none.

Similar Messages

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_1.png and I would like to put in something more relevant than just shapeimage?

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_2.png and I would like to put in something more relevant than just shapeimage_2?

When you drag images from iPhoto to iWeb, iWeb retains the original filename.
When you use a mask, iWeb creates a png file with the shapeimage name.
So do not use a mask and crop your images before dropping them on the iWeb canvas.
When you use an irregularly shaped mask, then png files are created. They have to be png because of the transparency of the shape.
You can use a 3rd party application to create the png images yourself, and give them a proper name.
Or use the published png files, rename them and drop them back onto the iWeb canvas, while first removing the previous images.

How do I change the image selected for the finalized movies pane in all events?

How do I change the image selected for the finalized movies pane in all events? I made a movie some time ago in iMovie, and a still from this now appears as the image for Finalized Movies in the All Events pane (as well as showing up if I then click on this pane to take me to Finalized Movies). Anyone know how to change or delete this image, please?

Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com

When you drag a link onto your desktop, how do you change the image for the shortcut?

When you drag a link onto your desktop, how do you change the image for the shortcut?

Select it, hit command-i (or choose File -> Get Info), select the icon in the info window and paste something else there.

How can i change the image in portal logon screen

hi guys
pls tel me
how can i change the image in portal logon screen
thanks
regards
kamal

Hi
Download the par file com.sap.portal.runtime.logon.par.bak from
Go to System Administration -- Support -- Portal Runtime -- Browse Deployment.
The path should ROOT/WEB-INF/deployment/pcd. Now download that file into local system.
Create a Par project and make necessary chenages ..i.e
Open the downloaded par file with WinZip and inside the lib folder three jar files named com.sap.
portal.runtime.logon_api.jar, com.sap.portal.runtime.logon_core.jar and umelogonbase.jar will be there. Copy those files in the folder u2018libu2019 in par project.
Now change a branding Image...i.e
Replace the branding-image. jpg with your company branding image in the same name.
Once modifications are done,then create a par project and upload the par file into portal.
Go to the path System Administration -- Support -- Support Desk -- Portal Runtime -- Administration console.
then browse the file and click on upload.
Connect to server where the Portal WebAS is running and go to:
(drive):\usr\sap\<system id>\<system instance>\j2ee\cluster\server0\apps\sap.com\com.sap.security.core.admin\servlet_jsp\logon\root\layout.
There you will find the images used on logon screen, you can replace them for your
company images, please take care with the width of the images, as usual, to make this
change effective, you must restart the whole WebAS.
Regards,
Raju

How do I change the image used on an movie project icon? iMovie seems to select an image at random from the images I imported.

How do I change the image used on an movie project icon?
iMovie seems to select an image at random from the images I imported.

Not sure I understand how to use what you have posted. Here's what my init() looks like:
public void init()
setLayout(new BorderLayout());
p=new Panel();
p.setLayout(new GridLayout(1,1));
callnowButtonURL = getURL(callnowButtonFilename);
if (callnowButtonURL != null)
callIcon = new ImageIcon(callnowButtonURL,"call");
endcallButtonURL = getURL(endcallButtonFilename);
if (endcallButtonURL != null)
endIcon = new ImageIcon(endcallButtonURL);
b=new JButton(callIcon);
b.setBorder(new EmptyBorder(0,0,0,0));
b.setBorderPainted(false);
b.addActionListener(this);
p.add(b);
add(p,"Center");
Now the ActionListener is basically:
public void actionPerformed(ActionEvent e)
if (mybool == false)
<Perform actions here set mybool to true>
Change JButton b to use EndIcon
else
<Perform actions here set mybool to false>
Change JButton b to use CallIcon
Can you clarify how to perform the action I require? You can have a couple of Dukes if you can help me sort this out.

How Do I Change The Image Used For The Power Up Screen?

Windows 8.1 Pro with all patches.
How do I change the image that is shown when you power up a PC?
Note: This is not the Start Screen background or the Lock Screen background or the Desk Top background.
http://www.saberman.com

Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com

How do you change the image in a JPanel?

Hey! (firstly, i need to use image on a JPanel, label&icon not an option).
I've made my JPanel class
    public class DrawingPanel extends JPanel {
        Image img;
        DrawingPanel() {
            Image img = Toolkit.getDefaultToolkit().getImage("13.jpg"); //default image at startup
        public void paintComponent (Graphics g) {
            super.paintComponent (g);
            // Use the image width & height to find the starting point
            int imgX = getSize ().width/2 - img.getWidth (this);
            int imgY = getSize ().height/2 - img.getHeight (this);
            //Draw image centered in the middle of the panel
            g.drawImage (img, 0, 0, this);
        } // paintComponent
    } // DrawingPanelAnd I've made my instance of it and added it to the Frame:
    DrawingPanel imagePanel = new DrawingPanel();Now, I need to change the image on the JPanel according to the user's input. I have the string of the location of the new image. How do I update the JPanel to display this new image? Any help greatly appreciated!!

Well... You could just add a method in your class which sets the image according to the new image name you provided. Something like this:
    public class DrawingPanel extends JPanel {
        Image img;
        DrawingPanel() {
            img = Toolkit.getDefaultToolkit().getImage("13.jpg"); //default image at startup
        public void setImage(String imageName) {
                img = Toolkit.getDefaultToolkit().getImage(imageName); //Loading the desired image
        public void paintComponent (Graphics g) {
            super.paintComponent (g);
            // Use the image width & height to find the starting point
            int imgX = getSize ().width/2 - img.getWidth (this);
            int imgY = getSize ().height/2 - img.getHeight (this);
            //Draw image centered in the middle of the panel
            g.drawImage (img, 0, 0, this);
        } // paintComponent
    } // DrawingPanel

How can I change the images for af:statusIndicator?

The default icons (busy and not busy) have a deep blue background which is different from our chosen background color for the application.
As per the ADF documentation for Web development Section 16.6:
"... you can use skins to change the actual image files used in the component."
Is there any code example on how to change the image file for af:statusIndicator?

Hi,
You can check [this post|http://forums.oracle.com/forums/thread.jspa?threadID=615673] for some samples.
-Arun

How do I change the image size by pixels

In the older version of photoshop you could change the image size and change it by pixels independently. With photoshopcc if I change the width the height changes. How do you change the 2 values independently to get the desired size?

You'll want to use the Camera icon to upload your screenshot images when you reply.
But jml007 has the answer I think you want. Change the units from inches to pixels and click on the chain link to turn it off and enter your W H values independently.
Mark his answer as correct if this solves your issue.
Gene

How can I change the image quality of a background image on a master slide?

I can change the image quality from low to high for other images in my Captivate project, but the background image I'm using on my master slide looks pixellated. I would like to change this image to high-quality but I don't see the option in my properties panel on my master slide.
Thanks for any help!

You cannot import AI images directly. However, when I use Illustrator drawings, I'll import them as smart object in Photoshop and then you can import the PS-layer.
The quality you set in Captivate is not for individual images, but for the slides that are published as bitmap. This means that it doesn't matter if the object is on a master slide or on a regular slide IMO
Lilybiri

How can i change the image just above password entry on login window

I recently discovered that the image on my login window, right above where I type my password, has changed. It used to be the photo the computer took of me when I first set up my MacBook Pro. Now for some reason, the image has changed to a baseball! How do I change this?

It's something you set up when you made your user profile. You selected the OS version to be displayed in your profile. It's what we see in your original topic post:
MacBook Pro, Mac OS X (10.5.8)
I don't know if you see that yourself of if see mine, for example.

How do I change the image resolution of a photo?

Hi..,
     I am the beginner in Photoshop.
     I want to change one image resolution from 72 dpi to 300 dpi.
     So, I search and got one pdf for change the resolution of the image. In that they mention, take the "Printscreen" of the image and paste in the photoshop and change the mode(Index - flatten) and change resolution via the "Image -> image size -> Resolution".
     Like that i did, it changed correctly.
     After that I Open one already saved image file in Photoshop and do that same steps but the resolution was not changed.
So, now how to change that saved image resolution to 300 dpi...??
Regards.,
VISWA

Viswa,
To find the current resolution of your image, follow these steps:
With your image open in Photoshop, Image > Image Size (Like you've already done earlier).
Check the resolution as shown above. If it doesn't show 300, enter 300, hit OK and 'Save' your image.
Open the file and check again. If it still shows 72, post back with more details of the type of file you're trying to open in Photoshop and if possible, a screenshot so we can help.
-ST

How do you change the image size and resolution in photoshop everytime I change the width the height changes my measurements will not stay

Can someone assist me with changing image size and resolution. each time I change the width the height changes and vice/versa?

There's a chain link between width and height. The point is to keep the aspect ratio the same, otherwise your picture would get stretched.
You click on the chain-link to shut that off and you can adjust width and height separately.
Also could you give us your version of Photoshop, what OS you are running it on (Windows 7 for example) and what exactly you want to do with your document?
Resolution is the print term for how many pixels will be printed on an inch of paper. It doesn't apply if your image is intended for screen viewing.
Gene

How do I change object layer options and select visible psd layers for an image?

Hello
I have a plugin that replaces images in an indeisgn document. When a user has selected to show one object layer in a psd but not another layer, Indesign looses this information when I replace the old image.
I can store the layers that are visisble before I replace the image, but I have not been able to change the visibility of tha layers back in a correct way.
When the image is replaced, all the layers becomes visible, but if I open the "Object layers options" dialog, only the layers I want to be visible is marked as visible in the list. What I see in the dialog does not correspond with what is shown on the screen.
I use the folowing code to store info about the visible layers:
K2Vector<int32> PnlTrvUtils::GetGraphicLayer(UIDRef imageRef) {
    ErrorCode    result;
    K2Vector<int32> visibleLayers;
    InterfacePtr<IGraphicLayerInfo> iGraphicLayerInfo(imageRef,IID_IGRAPHICLAYERINFO);
    if ( iGraphicLayerInfo != 0 ) {
        if ( ! iGraphicLayerInfo->GetIsInitialized() ) {
            InterfacePtr<ICommand> iInitializeGraphicLayersCmd(CmdUtils::CreateCommand( kInitializeGraphicLayersCmdBoss ));
            if ( ! iInitializeGraphicLayersCmd ) {
                result = kFailure;
            } else {
                iInitializeGraphicLayersCmd->SetItemList( UIDList( imageRef ));
                result = CmdUtils::ProcessCommand( iInitializeGraphicLayersCmd );
                if ( result == kSuccess )
                    if ( ! iGraphicLayerInfo->GetIsInitialized() )
                        result = kFailure;
        int32    i;
        int32 iLayerCount = iGraphicLayerInfo->GetNumberLayers();
        for ( i = 0; i < iLayerCount; i++ ) {
            if (IGraphicLayerInfo::kVisibilityShowing ==iGraphicLayerInfo->GetNthLayerCurrentVisibility(i)) {
                // CAlert::ErrorAlert("visible");
                visibleLayers.push_back(i);
    return visibleLayers;
And I use the folowing code to select the layers I want to be visisble:
void PnlTrvUtils::SetVisibleGraphicLayer(UIDRef imageRef, K2Vector<int32> visibleLayers) {
    ErrorCode    result;
    InterfacePtr<IGraphicLayerInfo> iGraphicLayerInfo(imageRef,IID_IGRAPHICLAYERINFO);
    if ( iGraphicLayerInfo != 0 ) {
        if ( ! iGraphicLayerInfo->GetIsInitialized() ) {
            InterfacePtr<ICommand> iInitializeGraphicLayersCmd(CmdUtils::CreateCommand( kInitializeGraphicLayersCmdBoss ));
            if ( ! iInitializeGraphicLayersCmd ) {
                result = kFailure;
            } else {
                iInitializeGraphicLayersCmd->SetItemList( UIDList( imageRef ));
                result = CmdUtils::ProcessCommand( iInitializeGraphicLayersCmd );
                if ( result == kSuccess )
                    if ( ! iGraphicLayerInfo->GetIsInitialized() )
                        result = kFailure;
        InterfacePtr<ICommand> setLayerCmd(CmdUtils::CreateCommand(kSetGraphicLayerInfoCmdBoss));
        if (setLayerCmd) {
            setLayerCmd->SetItemList(UIDList(imageRef));
            InterfacePtr<IGraphicLayerInfo> setLayerCmdLayerInfo(setLayerCmd, UseDefaultIID());
            // copy over the new settings
            setLayerCmdLayerInfo->Copy(iGraphicLayerInfo);
            int32    i;
            InterfacePtr<IGraphicLayerInfo> resetLayerInfo(setLayerCmdLayerInfo,IID_IGRAPHICLAYERINFO);
            if (resetLayerInfo) {
                int32 iLayerCount = resetLayerInfo->GetNumberLayers();
                for ( i = 0; i < iLayerCount; i++ ) {
                    bool16    visible = false;
                    for(int32 j = 0; j < visibleLayers.size(); j ++) {
                        if (i == visibleLayers[j]) {
                            visible = true;
                    if (visible) {
                        resetLayerInfo->SetNthLayerCurrentVisibility(i, IGraphicLayerInfo::kVisibilityShowing);
                    } else {
                        resetLayerInfo->SetNthLayerCurrentVisibility(i, IGraphicLayerInfo::kVisibilityHidden);
                // clear out the flag
                int32 currFlags = static_cast<int32>(setLayerCmdLayerInfo->GetGraphicLayerFlags());
                currFlags &= ~IGraphicLayerInfo::kValidationFailed;
                setLayerCmdLayerInfo->SetGraphicLayerFlags(static_cast<IGraphicLayerInfo::GraphicLayerFla gs>(currFlags));
                // process the command
                CmdUtils::ProcessCommand(setLayerCmd);

Hello,
Did you get this to work?
Thanks.
P.

How can I change the image that's shown when you mouse-over a folder?

Lightroom defaults to using the first image depending on how you sort and I can't find out how to change this. I know how to do it for stacks, but not for folders.

If you're sorting- or could leave them sorted in by file name- changing the name of the first photo will get you there. Or changing the time stamp, etc.

How do I change the layer mask thumbnail to be a thumbnail of the image itself ?

Similar Messages

Maybe you are looking for