How do I change the length of multiple photo's after I've added them?

How do I change the length of multiple photo's after I've added them?

Hey,
The best way to do this is to select all the clips by holding down the shift key or command key if the clips you want to change are not all right next to each other and then selecting each clip that you want to change. Then double-click on the clips which will open up the inspector tab and then you can change the duration. If you want to just change all clips to the same duration just double-click on one of the photos and in the inspector tab next to the durationt tab you will see a box that says "add duration to all clips". If you click that, when you change the duration all the photos will change to that duration. That will then change the duration of all the clips at the same time.

Similar Messages

  • How can I change the length of multiple lines at the same time?

    This just seems like it should be a no-brainer, but obviously for me it isn't.  I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4.  Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines).  Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch?  It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
    I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
    I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
    Thanks for any help you can give!

    OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
    "If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
    Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
    And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
    A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help!

  • How can i change the length of a narration ?

    how can i change the length of a narration ?

    hotts77
    Thanks for the reply.
    Still not sure what version of Premiere Elements that you are using. But, the following should apply nonetheless
    What you describe is what I have described in my blog post and for which I have discussed all aspects of the issue. There
    is no workaround to force the program to give you more than you are getting now without other clips also on the track(s). The
    blog post just about says it all.
    You might have to weigh the pros and cons of
    a. Recording your narrations as .wav files in a free audio editor such as Audacity
    Audacity: Free Audio Editor and Recorder
    and then importing those into your Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets from where you drag the narration to the Narration Track.
    b. Put any video clips on the Timeline when you are recording your Premiere Elements narrations with its Narration Tool. Then remove these video clips and replace them with the real thing when you are ready to put narration and clips into the project.
    Please let me know if you are OK with the details.
    Thank you.
    ATR

  • How do I change the length of an audio file?

    How do I change the length of an audio file without changing the actual recording?
    I want to aligne start and end points to the rest of my project.

    Well, yes and no. I have tried the Bounce track in place function, but it did not do what I was after. However, today I got an idea that solved the problem. I copied the region I had punched in several times. Then I used the Bounce track in place function. This made a track that was just as long as all the other tracks. Finally I silenced the audio "clips" that I had used to make the region longer. I have now 24 tracks to transfer to the Alesis HD 24 that starts, and ends, at the exact same point. This will suit the Alesis software just fine, I think.
    Thanks for the tips.

  • How can I change the colors of a photo?

    How can I change the colors in a photo?

    No. You'd need an external editor for that kind of stuff:
    In order of price here are some suggestions:
    Seashore (free)
    The Gimp (free)
    Graphic Coverter ($45 approx)
    Acorn ($50 approx)
    Pixelmator ($50 approx)
    Photoshop Elements ($75 approx)
    There are many, many other options. Search on MacUpdate or the App Store.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Of course, you may not want to change the shape of a photo which would distort it. You may want to print it in an oval shape but undistorted. I'd use a page layout app like Pages for that,

  • How do i change the administrator name and password when i forgot both of them

    how do i change the administrator name and password when i forgot both of them?

    Find the user name and then reset the password.
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box under “Select user account”.
    Note down the user account name.
    Enter a new password.
    Reenter the new password for the user.
    Note it down.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • How can I change the font to multiple titles at the same time?

    Hey guys, quick question. I have a bunch of titles and lower thirds in my project and my producer decided that he didn't like the font we were previously using and wants to change it to a new one. He seems to do that pretty often. Is there a way to "globally" change the font to multiple title cards at the same time instead of clicking on each one separately and doing it manually for each one? And if there is no way to do that does anyone have any ideas on how to make it easier?

    If you have any idea of design and fonts you would understand that "Title Cards" are not "exactly the same" if you change the font... because all fonts are not equal! Lower thirds are probably even more restrictive because they have design elements in them.
    If you work with "change their mind producers"...the deal that goes with that is suck up their changes. (on a salary or otherwise)
    I was just saying there is no way without scripting ..to change a title ( graphic) en masse ( in Premiere) and get it working because of font differences.

  • How do I change the length of a column in the metadata?

    A very simple package, reads data from SQL Server and FTPs it to a destination. I have zero experience with SSIS.
    I had to add a new column (HEA_ID) to the input and output. The output record has a filler at the end (I hope you know what a filler is) and the new column has to go before the filler and the filler length reduced accordingly.
    Problem: there is no apparent way to place the new column anywhere but after the Filler. The filler in the metadata is the wrong length and there is no way that I can see to change the length.
    There is a yellow exclamation mark on the Flat File destination (where the filler is wrong length)
    I get these erros when I run the updated package.
    "The external metadata column is out of sync with the data source column. The column 'HEA_ID' needs to be updated in the external metadata column collection".
    "The column filler needs to be updated in the external metadata column collection"
    I have no idea how to fix these errors. Help needed.

    Hi AllTheGoodNamesWereTaken,
    According to your description, you add a new column HEA_ID and make some changes in filler column in the External Columns, so those two columns are out of sync with the data source column.
    Please note that columns are created based on the data source columns. So we couldn’t directly change them in the Flat File Destination Advanced Editor.
    To avoid this error message, just as Visakh said, just review mappings once again in the Flat File Destination. If we want to change the columns in the Flat File Destination, we need change the source columns.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How can we change the length of the description

    Hi
    I would like to change the length of the description under template maintenance --> General Tab --> Description.
    If you can't understand my question pls go through the below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/af/348d400da8d838e10000000a155106/frameset.htm
    Thanks in Advance

    Please do not cross post

  • I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

    I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

    Welcome to iMovie Discussions.
    See my 2nd reply to 'getzcreative', here.

  • How do you change the resolution of a Photo?

    In iPhoto, how to you reduce the resolution of a photo in order to reduce the file size? This makes it easier to email because of the smaller file size?

    Let's say I have a photo with a resolution of of 3264 x 2448 pixels.
    Tat's not a measurement of resolution, that's the dimensions (length x breadth) of the photo, expressed in pixels.
    Resolution is a vague term most used to describe the density of pixels - i.e the pixels per inch.
    1) I want to edit it and reduce the resolution to 1024 x 768 pixels.
    No, you want to reduce the dimensions of the image to 1024 x 768
    2) Do this within iPhoto without using the export feature thereby keeping the edited photo in iPhoto?
    You can't. It can only be done on export. Why? When you edit a photo iPhoto preserves the original and makes a copy of the file containing the edit. As most people reduce the dimensions, file size or resolution for a specific purpose (to upload it for instance), it's thought best to export it, upload it nd then trash it.
    Of course, you can simply import the export back in, if you have a burning need of it in iPhoto.
    Regards
    TD

  • How do I change the date of a photo in iPhoto?

    I need to change the date of when the pic was taken because it is wrong what do I need to do?

    Depends
    The general answer is the batch change ==> data and time command which changes a photo or group of photos to a specific date/time with an option to add a fixed increment to the time on multiple photos
    But if you have a special situation like a camera with an incorrect date/time then you use the adjust time and date command
    LN

  • How can I change the place of a photo in iPhoto?

    How can I change the place label of a photo in iPhoto?

    http://support.apple.com/kb/PH2381
    LN

  • How do you change the size of a photo in a document?

    Hello
    I've pasted a photo into a document I'm typing but the photo is too big.  How do I change the size of the photo?
    Thanks

    TextEdit is not a very sophisticated program. As far as I know, there's no way to resize an image on the fly in TextEdit, so you'll have to follow Shotgun00's advice.
    I would advise not using TextEdit for anything real. Buy yourself a copy of Pages from the App Store instead, you'll be much happier with its capabilities if you intend to create complex documents containing images and text.

  • How do i change the title to my photo album:(ios7)

    How do I change the name of the title for one of  my photo albums in ios 7

    When you set the podcast up in WordPress you must have entered a title; it's presumably there that you can change it, and then re-publish it, though I can't advise on WordPress.
    One caveat, though: some podcast creation services derive the feed URL from the title: I don't know whether WordPress is one of them, but if it is you shouldn't change the title because if you change your feed URL withouth redirecting iTunes to a new feed in the proper manner you will lose control of your podcast.
    The method of changing iTunes to a new feeed URL requires the old feed to be left in place with a special tag added to it (I don't know whether this is possible in Wordpress) - the method is detailed here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
    However if the feed URL is not affected by changing the title then you can just go ahead and change it.

Maybe you are looking for