How do I change the number in iMessage on my iPad?

I already have a number on it but it isn't the right one

Basically you have to turn off Messages and sign out and then start all over again. The iPhone number that you want to use must be associated with your Apple ID or it will not work.
This might be helpful.
http://support.apple.com/kb/HT5538

Similar Messages

  • How can I change the number in iMessage send and receive on my iPhone 5c that is gray?

    I recently bought a iphone 5c and when I activate it, the imessage automatically set the number in send and receive, but the funny thing is the number that is registered is my number in another network and is grayed out, How can I change the number to the sim that I'm using in the phone?

    HI,
    As far as I can tell you cannot delete the ID when Only one is listed.
    This would suggest that you have to add the second (Correct) one and then delete the first (wrong) one.
    I can't say I have tried this yet.
    10:43 PM      Thursday; April 5, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My iPad has connect to the wrong number for imessage and facetime. How do I change the number on my iPad for imessage and faceting?

    When setting up my new iPad and entering my own Apple ID my sisters number appeared on the imessage and facetiming; however her number is not associated with my Apple ID. How do I change the number to my own?

    Turn iMessage and FaceTime off, reset the device by holding both buttons until the apple logo appear then let go and wait for it to restart. Then turn iMessage and FaceTime back on and enter the settings again

  • How do I change my number for iMessage and facetime

    How do I change my number for iMessage and FaceTime on my iPad mini

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • How do i change the number on imassage

    how do i change the number on imassage?

    The only way to change the number is to change the SIM card. If you recently had your number ported, then you need to turn iMessage off, wait a few minutes and then turn it back on again. After it reactivates, then check the Send and Receive area.

  • How do I change the number of picture columns in a folder

    how do I change the number of picture columns in a folder

    Never mind.  I found the answer.  For those who may wonder: you slide the cursor on the bottom right.  I looked in IPhoto help but there was nothing there.

  • How do I change the number formatting within a Cell Table in Microsoft Word?

    Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements. 
    I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
    aligns by the decimal point and use the $ signs and () for negative numbers.  We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
    the text if it were to be typed in Excel. We have also tried  creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue.  The only option is to use tables within Word but how do we change
    the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?  
    If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
    Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
    Thank you very much for your help!!!!!

    Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
    Option 1:
    - Select the cells for which you want to do this.
    - Display the ruler.
    - Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
    - Click in the ruler where you want the decimal tab.
    Option 2:
    - Select the cells for which you want to do this.
    - Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
    - Click the Tabs... button in the lower left corner of the dialog.
    - Specify a tab position in the box, e.g. 1.5".
    - Select the 'Decimal' radio button under 'Alignment'.
    - Click Set.
    - Click OK.
    You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
    Regards, Hans Vogelaar

  • How do i change the number of columns within a text box?  I need to go from three columns to one.

    How do I change the number of columns within a text box?  I need to go from 3 columns to 1.  The insert column is highlighted and column break does not work for this.

    Pages '09 does not seem to allow layout breaks in Textboxes.
    Pages 5.2 has the same limitation.
    Use multiple linked Textboxes in Pages '09 to get the layout you want or create your layout in a Word Processing template in the document layer.
    Peter

  • How do I change the number of rings on my phone?

    how do I change the number of rings on my phone?

    Call your provider and ask them to do it.
    This is not controlled from the iphone.

  • How can I change the preview in imessage on a mac, when notifing me?

    how can I change the preview in imessage on a mac, when notifing me?
    I want it not to preview, just to show me the name of the person sending me the message, not the name of the person sending the message and the message they wrote.

    While we all have MacBooks in this forum not all of us use iMessage. There's an iMessage Support Community where everybody uses iMessage. You should also post this question there to increase your chances of getting an answer.  
    https://discussions.apple.com/community/mac_os/messages_beta

  • How do I change the number of rings on messages?

    How do I change the number of rings on messages. At the moment it rings twice and I miss it. Could do with being quite a few rings more.

    This is determined by your carrier. It isn't a number of rings - it is based on time beginning when the call is received at your carrier's servers.
    I believe with AT&T in the U.S. the maximum is 30 seconds. This does not equate to a full 30 seconds of ringing with the phone since there is some delay involved between the carrier receiving the call and it reaching the phone.

  • Facetime is using my husband's cell phone number instead of mine? How can I change the number in face time?

    Facetime is using my husband's cell phone number instead of mine. How can I change the number to mine in face time?

    You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
    That way you can quickly log in to your own account - then back to his.
    You should obviously have different passwords.

  • In i photo11,how do I change the number of thumbnails in the rows?

    In I photo 11, how do I change the number of thumbnails in the rows?  I now have 5 large thumbs across, but
    I would like to have 10 or 12  normal sized thumbnails in each of the rows.  Thanks

    tab --
    Here's where to read up on your question.
    If you don't find your answer, post a new topic there:
    https://discussions.apple.com/community/ilife/iphoto

  • How do you change the number of rings before FIOS goes to voice mail?

    Currently my FIOS residential service picks up voicemail after 4 rings, thereby negating my answering machine on my phone. It is then hit or miss for the system telling me if we have a voice mail. I would prefer to use my phone answering machine
    How can I change the number of rings on FIOS to 6-8 more rings, in order for my phone answering machine to pick up?
    Thanks

    rhc86 wrote:
    Currently my FIOS residential service picks up voicemail after 4 rings, thereby negating my answering machine on my phone. It is then hit or miss for the system telling me if we have a voice mail. I would prefer to use my phone answering machine
    How can I change the number of rings on FIOS to 6-8 more rings, in order for my phone answering machine to pick up?
    Thanks
    Call your voicemail access phone number and go to settings. There is an option for that.

  • How do you change the number of rings before a call goes to voicemail?

    How do you change the number of rings before a call goes to voicemail.

    You can't; it's set by Verizon at 30 seconds.

Maybe you are looking for