How do I change the order of files and documents in adobe acrobat 9, in the Portfolio??

I have been searching for 3.5 hours now and can't find the answer to this. Please help! I have created a portfolio in Adobe Acrobat Pro 9, which has three files and three documents, the last step is just to arrange them in the right order. If you can please list step by step.
THANK YOU!!!!!!
Heart

I think you can remove suggestions from the address bar by arrowing down to the unwanted site on the auto-suggest drop-down list and pressing Delete.
Make sure to arrow to another site or edit the address before pressing Enter or using Go, because that deleted URL will still be the address bar.
Does that work?

Similar Messages

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

How do I use AirDrop to share files and documents between my iPad and computer?

Even directly plugging in my two devices to eachother I cannot get my documents onto both of my devices unless I go through a rediculously long route to do so. The only reason I got the IPAD was to NOT have to go save afile on my computer, email it to myself, switch to my ipad, open my email, open attachment into Textius (the app I PAY FOR), save it onto the device. I have 26 items to do this to. I can do this faster on my phone because my comuter recgnizes it as a device at least i can drag and drop there! I paid too much money to deal with this ****. air drop doesnt work for me and I would like to understand why in the world it doesnt work between my own devices.

AirDrop does not work cross-platform. Not sure where you got that impression. It only works OS X to OS X, or iOS to iOS.
In the upcoming major software releases this Fall, iOS 8 and OS X Yosemite, AirDrop will work cross-platform, but not right now.

How can i change my order shipping address~

I'm now being abroad , my family moved to NY from CA a few days ago ,but my order shipping adress was still my CA address ,how can i change my order shipping address except phonecall ,can someone please give me the apple serve Email which can chage my shipping address before Oct 8th when the product post~
thx a lot!
my email ad:[email protected]

Have you tried to change your address with DHL? I think that will solve your problem if changing address with Apple is so hard, or too late at the moment.
And I suggest you to call instead of sending emails, it's way more efficient. I know you are in China, but I don't see why you can't make a phone call from there.
In addition, you can try track your DHL shipment via this service, http://dhl.trackingnumber.org/, it shows the location on a map.

Finding the Sample Library File and the Wyoming Folder

I had a 30 day trial and purchased the activation code (not the DVD). The "Exploring Aperture" tutorial mentions getting the Sample Library File and Wyoming Folder from the installation disk. Since I don't have an installation disk, does anyone know where I can get the Sample Library File and Wyoming Folder?

Chaz9,
Welcome to the user-supported Aperture discussion group. Have you read the terms by which Apple runs forum? http://discussions.apple.com/help.jspa
Your question has come more times than you cam imagine. Here's one recent thread.
http://discussions.apple.com/thread.jspa?messageID=12898247&#12898247
nathan

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

I don't think Finder does this (I've tried).
iTunes does though. Where you can set artwork or the "poster frame"...
This may not be what you want but if it helps, I know 2 ways do this is
Open the video in QuicktimePlayer7 | View | Set Poster Frame (even then, you might need to save it as .mov (ie in a 'mov container').
Drag the file into iTunes and set the artwork (as in http://www.dummies.com/how-to/content/adding-album-cover-art-or-images-in-itunes .html)
From there, iTunes will use that frame as the "poster frame" ie the photo/frame that shows when you browse your videos. Which is what you want, but limited to iTunes.
When I do either of these above, the frame I set does not show when exploring files in "Finder" (or in the other Explorer tool I use called "Pathfinder").
So it maybe, that exactly what you want, is not possible.

How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

Hi flaviusjack,
If you still have the .doc files, it might be best to send those to your recipients so they can be edited. Otherwise, you can use ExportPDF to convert the PDF files back to .doc format. But, again, that step would be unnecessary if you have the .doc files.
Best,
Sara

SDHC Card - Change the Order of Files

I been trying to find a solution, so far unsuccessfully, to try to force the alphabetization of files and folders on a FAT SDHC Card. The memory card is used in a portable music player and when I add new files to the card the newly addded files show up at the end of the previously added files and not in alphabetical order. The music player does not have a feature to force the files in alphabetical order. I know on Windows there are a couple of software solutions that will force the order of files, for example FATSort. Is there such a solution for the mac? Thanks

to try to force the alphabetization of files and folders on a FAT SDHC Card.
Files are sorted based on the column header you sort on.
Viewing in a window will not affect how the player sees them though.

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes11.4

I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out. I can't change tags for almost all my audiobooks. Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes 11.4 I don't have iTunes Match.

Select all the songs and then Advanced -> Convert ID3 tags.
http://docs.info.apple.com/article.html?path=iTunesWin/6.0/en/655win.html

HT4484 I need to purchase an Iphoto book. I have updated my new address as the USA, but when I order the book it still lists the price in Pounds and has my old UK address listed. How do I change it to USA Dollars and my USA address? Anyone know

I need to purchase an Iphoto book. I have updated my new address as the USA, but when I order the book it still lists the price in Pounds and has my old UK address listed. How do I change it to USA Dollars and my USA address? Anyone know

You are on the UK Store. Scroll to bottom right, click on the USA flag to switch to the American store. Though you'll have to set up an account there too.

How do I read in a 1 Hz pwr level file and send it out at 1Hz to the signal generator?

I would like to be able to read in a 1 Hz file and use the format into string and send it out at 1 Hz to a signal generator to vary the levels to match a timestamp. I was trying to use the format into string but I can't figure out how I could read in this file.
00:00.0
-113.586
00:01.0
-113.598
00:02.0
-113.61
00:03.0
-113.622

If the file is a .csv file as you said in your other post, then you should just be able to use Read From Spreadsheet File, making sure to set the delimiter to comma rather than tab. If it's a small file, you can just read in the whole thing, then use a loop with a Wait For Millisecond Multiple node (the metronome) to send the data once every second.
If the file is very large, and you don't want to read it all at once, you can tell the Read From Spreadsheet File node to read only one line at a time. Put the read node and the data sending node in the same While loop, and use a shift register to carry the Mark After Read value from one iteration into the Offset or Mark At Start terminal in the next iteration. That way, you start reading each line at the end of the previous one. Use some form of flow control (such as a Stacked Sequence Structure) to make sure things happen in the right order - read data, wait for the right time, send data.

How do you change orientation of pdf file to fill and sign?

how do you change orientation of pdf file to fill and sign?

Adobe Fill & Sign does not yet have a feature to rotate PDF pages but there are several websites that will rotate a PDF for free and then you can bring that PDF with correct orientation into Fill & Sign to fill out. Any of the top hits when you google "rotate PDF free" will work.
Thanks,
Josh

Unable to make changes to a jpg file and then save it without the program trying to change it to a psd [was: What a Pile of Crap!]

Can't even make changes to a jpg file and then save it without the program trying to change it to a psd!!!!! No wonder nobody like Adobe anymore.

Do you mean that PSD comes as a default option or that JPEG is not available no matter what?
Did you add a layer? Did you change the bit depth? Did you add transparency? The JPEG format does not support layers, nor 16-bit images, nor transparency.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How do I change the order of files and documents in adobe acrobat 9, in the Portfolio??

Similar Messages

Maybe you are looking for