How do I change the perspective of an image not created in Illustrator?

I want to change the perspective of an image I created using another program. I want to add this image to a project I am working on using Illustrator, but the perspective is off.

Similar Messages

  • How can i change the DPI of an image to 400 in illustrator?

    I'm very stuck with trying to change the DPI of an image to 400 so that it is ready to print and the resolution will be fine once printed but i have no idea how to do this in illustrator?

    dpi,
    If you are talking about a raster image placed in Illy, you can only change the size to get the desired PPI/DPI.
    If you are talking about raster effects or a raster image created in Illy, you may set the desired resolution of raster effects, or the desired resolution or total pixel x pixel size of the exported/saved image.
    If you are talking about pure vector artwork, the resolution depends on your printer (driver) (settings), as Doug said.

  • How do I change the dimensions of an image? The Image Size dialog box will not allow me to change it

    How do I change the dimensions of an image? The Image Size dialog box will not allow me to change dimensions.  I am taking an online class and the Image Size dialog box looks different than the one I am seeing in Photoshop CC.  It has the option to change the dimensions.

    When you say chage the dimentions, do you mean crop the image and adjust the size of the image at the same time, or do you mean you want to just resize the image?  Can you post a screen shot of what you're trying to do?

  • How do I create a duplicate image inside the same page? Then how do I change the color of that image

    how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

    Hello there!
    Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
    My layers panel looks like below.
    To duplicate your image, click the downward arrow on the right side of your Layer Panel.
    Select Duplicate Layer. This will duplicate the layer that the image is on.
    Select "OK" to approve the duplication.
    As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
    Now to colorize your image, go to Window > Adjustments.
    The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
    The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
    As you can see below, the image is now red.
    Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
    Select the move tool, so I can now move the image layers so we can see both of them.
    With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
    I hope that helps. i have also included helpful links.
    Please post back with any questions,
    Janelle

  • How can we change the valuation type for a material created.

    How can we change the valuation type for a material created.
    Note : All open orders are closed for this material.3
    Please guide

    Hi,
    You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
    Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
    - you are not allowed to have open transactional data
    - no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
    - in case of valuation category setting batch archiving may be necessary
    BR
    Csaba

  • How can i change the perspective of this shape i made (cs5)?

    i made a shape and i want to change the perspective so it can look like mat on the ground. is it possible?    eg)  http://img834.imageshack.us/img834/5120/thitothis.jpg
    i can do with rectangles easily, but after ive added the decoration to the mat from a birds eye view, idk how to do it.
    thanks

    Convert it to a symbol and use perspective grid. There are lots of tutorials on the feature, you could try http://fridays.mordy.com or http://blogs.adobe.com/infiniteresolution/2010/05/drawing_in_perspective_using_a.html

  • How do I change the background to an Image in the web gallery wizard?

    Im using a flash gallery but I can only change the background colour I can't workout how to change the background to an image. Can it be done?
    Thanks
    Jamie

    Not directly this time, I believe, but by a post web gallery generation hack to the generated files.
    Don
    Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
    See LR Links list at my
    Blog for related sites.

  • How can I change the color of interactive image label box background.

    Interactive image labels are a bit overwhelming in appearance. Can I change the label background color or make it partially transparent? I have tried several things and looked this up on Lynda.com training but no info.

    don't know how much this might help but you can change some colors using the Inspector as follows:
    from the text menu you can control paragraph and character colors, from the text menu you can control the text color.
    hope this helps...

  • How do I change the color of an image

    I have some photos that I would like to change the color of, so that I can have the same image in multiple colors. How do I do this using Photoshop CS4?

    Using a Solid Color Layer set to the Blend Mode Color is one of several options in general …
    But maybe you could post a screenshot and elaborate one what you are trying to achieve.

  • How can I change the length value of all notes in a score, .e.g., double the length, or halve the length)?

    I'd like to change the score of a composition so that the quarter notes are eighth notes, the half notes are quarter notes, the whole notes are half notes, etc.  Is there a way to accomplish this uniformaly, all at once, in Logic Pro 9?

    I am assuming that you have done a lot of work already on an Arrangement and now want to change the whole arrangement globaly.  Here is how I would do it:
    1 - Make sure your midi notes are all quantised and of uniform length whatever their note values. ( This applies especially  if you have played the notes in in real time from a keyboard which is likely that they will be uneven - so quantize the lot before doing this. If you have 'written' or dragged the notes in Step Time then it is not so critical)
    2 - Select all the regions and then grab the Right hand end while holding down OPTION and SHIFT - you will be able to drag all the regions to the same uniform length.
    3 -  Calculate the entire length of the regions you have already written and round them off to a set number of bars. Let's say for example the regions extend from bar 1 - to bar 16. You are going to reduce the regions to exactly half their length by OPTION dragging the regions smaller. That way you will get quarter notes halving to 8th notes. ( If it was the other way round you would OPTION drag the regions larger the other way)
    Hope that helps
    Best
    MS

  • How can I change the view of an image

    Hi!! I want to ask if anybody know how to open a document from a content area not with the explorer, but with another image viewer.
    Thanks in advance!!

    dpi,
    If you are talking about a raster image placed in Illy, you can only change the size to get the desired PPI/DPI.
    If you are talking about raster effects or a raster image created in Illy, you may set the desired resolution of raster effects, or the desired resolution or total pixel x pixel size of the exported/saved image.
    If you are talking about pure vector artwork, the resolution depends on your printer (driver) (settings), as Doug said.

  • ¿How do you change the time of all images and do the chroma key effect in ¡Movie 10.0.2?

    I know it's a simple question, but i had ¡Movie '08 and I bought the latest version, and it's really different, so I don't know, if i have like 150 photos (it's an stop-motion) how can I put the same duration? And do the chroma key effect? And I don't know why, all the images have the Ken Burns effect and I don't know how to quit it. Thanks for the help!
    Marcireca

    I solved the same time problem, but now the problem is that when i use the chroma key it automatic uses the blue screen effect, not the gren (wich I want). Please help! Thanks!

  • How do I change the colors of this image?

    I want to change the color scheme of this image, not just re-color it one color.  I have the original file, this is just the shutterstock preview image. I'm a beginner with Illustrator.
    Any tips would be much appreciated! Thanks

    Select it, and click the Recolor Artwork button in the Options Bar.

  • How can I change the colors of this image?

    I want to change the color scheme of this image, not just re-color it one color.  I have the original file, this is just the shutterstock preview image.
    Any tips would be much appreciated! Thanks

    colored image like this one, the Hue/Saturation function can be used to alter specific ranges of colors.  For example, altering the Hue and Saturation of Cyans and Yellows...
    -Noel

  • How do I change the date/time of a dll created in LabVIEW without killing it

    I use the LabVIEW (6.0.2 of course) Application builder to create a dll, and I cannot enter creation information, nor can I modify the date time property, which labVIEW does not properly set. I have tried to modify this information in Visual C++, but that destroys the dll because it wasn't compiled in VC++, and therefore isn't compatible.
    If anyone knows how to correctly modify the date/time (and the checksum) without destroying the dll, I would be gratefull to know.
    Thank you

    Dear Sir,
    I was browsing through MSDN in trying to find the info you are looking for and I step into this next file:
    "Peering Inside the PE: A Tour of the Win32 Portable Executable File Format"
    Which you can locate in the msdn.microsoft.com page by going to the search box and typing that title. The first result is that document. Also you may want to check the "imagehlp" file of the msdn library. This documents provides information on the DLL standard and functions.
    Good luck!...
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments

Maybe you are looking for

  • Need help in HR report

    hi is there any standar report for which will give CTC of employee for different designation in company . <b>CTC include below information Basic + D.P. ( 50% of Basic Pay) + DA (29%) Basic + D.P. + HRA (15%) Basic + D.P. + CLA + Transport Allowance +

  • How can i get my nikon software to work on my new mac book pro with lion

    i had nikon software (capture nx2 and view nx) on my old imac that ran leopard i cannot get my nikon software to install on my new mac book pro with lion can anyone help me get my software installed i need this software to work immediately because wi

  • Retina to Samsung Syncmaster monitor: NO DISPLAY

    I have recently bought a Macbook 15" retina. I already had the Samsung monitor display. (syncmaster 2333HD). But when I'm connecting them with the thunderbolt to HDMI converter, I get no display on my Samsung display, nothing. The only thing I note,

  • Problem: Windows knows the iPod is connected but iTunes doesn't

    I know there is a section at the Apple Support place. I've tried that but it hasn't worked. I also checked these forums, but the ones I've seen havn't helped me either. I've also called Customer Support, but the answer I got hasn't worked and right n

  • Changing default save/open to location from any application.

    I can't seem to find the location where i can set my files to save to opened location rather then always defaulting to my documents folder. This will apply to files being opened as well. For example when I work in an application and need to import 2o