How do I change the pitch of all tracks in a session?

I have 6-7 midi tracks in the key of "C". Now, I want to sing on this (in an audio file) with my pitch G, which means I have to change the pitch of all the tracks to G. How do I do this? Thanks!

Transpose either +7 or -5.
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=13%26se ction=29%26tasks=true

Similar Messages

How can I change the pitch of a track?

In Garageband 10.03, how can I change the pitch of a track?
It seems that I somehow mistakenly changed the pitch of a guitar track I had recorded, so that al the notes in the track sound like they're about an octave too high.
I don't know how I did that, and how to make the pitch slider appear so that I can try to lower the pitch.
I saw three Youtube videos that show how to change a track's pitch by using the pitch slider, but none of them explain how to make the pitch slider appear.
The pitch slider is supposed to appear in the lower, left corner of my window, but it doesn't appear in my window. Instead the lower, left corner of my window says things like, Region, Notes, Time Quantize, Strength and Transpose.

There's much to learn in Garageband!
If you want a comprehensive introduction to the new GarageBand, have a look at Edgar Rothermich's book:
Edgar's "GarageBand 10.0 How it Works" explains it very well with many screenshots. You can buy it as iBook from the Book store, as PDF, or as printed book from Amazon, Only, this version of the manual has been written for GarageBand 10.0.1, Some features have changed slightly since then.
http://www.dingdingmusic.com/DingDing/Manuals.html

HOW DO I CHANGE THE PITCH OF A MP3 TRACK IN GARAGE BAND 10.0.02

HOW DO I CHANGE THE PITCH OF A MP3 TRACK IN GARAGE BAND 10.0.02 , i could do it in old version looking at the you tube video, now the screen looks different cant find how to do it. Can some one put up a video please
Thanks

There are three ways:
Use an AuPitch filter on the track
Or turn the audio region into a loop
Enable "Follow Tempo and Pitch" for the track and use the transposition slider (that does not always work reliably)
To add an AuPitch filter:
Enable the audio Units in the GarageBand Preferences and then open the Smart Controls.
To add the AuPitch filter audio unit, click the Audio Unit button and enlarge the Smart Controls pane by dragging the dividing line to the Track Area upwards.
click the Audio Units Brick and add the AuPitch filter:
Type the pitch change in cents (100 cents per half note step) into the text field below the pitch control.
To create a loop from the audio file:
Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample like a regular loo by changing the project key.

How do I change the color of all the text in a PDF?

Hi.
I have a large PDF, over 1000 pages. Some of the text is highlighted which makes it difficult to see on my preferred document background. In Acrobat XI how do I change the color of all the text in the document back to black please? Although solutions using any other software will be much appreciated too.
I searched this forum already, and the same question was asked back in 2007 when it appears the only solution was to use an expensive third party plugin.
Thanks.

I know of no new solutions since 2007 except the ones you found.
You could use the Accessibility Preferences > Change Document Colors to choose a text color. However, this is an individual preference and cannot be set as a default for others opening the document.

How can I change the settings of all instances of a particular effect?

I've applied the same color correction effect to a lot of clips in the timeline. Now I want to fine tune the color correction (same setting for all clips still). How can I change the setting of all instances of the color correction effect without going into each clip manually?
Looking forward to your thoughts on this!! Go on and save my cold winter editing day ...

I was first hoping for File> New > Adjustment layer, but it's always greyed out. I thought that would create an adjustment layer, maybe I'm misunderstanding something? Anyway, if I create a black video stump and then right click it and choose "Adjustment layer", it will turn into one, and everything works as it should with that. If the black video become adjustment layer is placed on a video track atop my video, and I add for example color correction to it, it will be applied to the videos below.

On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?

On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?

You can set the default duration of stills but you have to do it before you start the project.
iMovie is not really suitable for stop motion videos and iMovie 10 is worse than iMovie 9 because the minimum still duration is not really controllable as you have found. I don't have experience of making such videos but there are 3rd party apps which appear more suited to this, for example http://www.macworld.com/article/1146623/stop_motion_Mac.html
mentions some of them, though its a bit old and you may be able to find more up to date information.
Geoff.

How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

How do I change the properties of all my highlight boxes at the same time?

How do I change the properties of all my highlight boxes at the same time?

Hello,
Which version of Captivate do you use, please?
Lilybiri

How can I change the color of all folders from light blue to another color?

My computer was just upgraded from Tiger to Leopard, and now all the file folder icons are pale blue on the desktop and elsewhere. My desktop is green and those light blue folders do not look good on a green background.
How can I change the color of the folder icons to another color?

Hi ys,
You appear to have taken a wrong turn on the information highway and would up in the backwater known as the AppleWorks forum. This is a place for discussion of issues and techniques connected with the now discontinued Apple productivity application AppleWorks.
Yours is a System question, concerned with how to accomplish something in the Finder, part of the Mac OS X software you recently upgraded. The question will be better served in the Mac OS X v10.5 Leopard section of discussions. The link will take you to that section, where I'd suggest using the Finder and Dock forum.
Regards,
Barry

How can i change the pitch of a song and burn it?

Okay, my sister has a dance competition coming up and she says that the song is just a little to fast for her to keep up with. I have already tried using the windows media player to try to change the pitch of her song and burn it to a cd but there seems to be no way how. I was wondering if there was any way that itunes or any other program out there, free please , could allow me to change the speed of any song and burn that changed song on to a cd.
This would make me so happy!
Windows XP

If you do a search for 'Change Tempo Song' on Google, lots of programs come up. Even if it's not free, you may be able to use one in demo mode to do what you want for your sister. It's quite kind of you to help her out.
Wish I had a better answer, but I've never used this kind of software...

How do I change the duration of all clips/ photos to under 00:00:03?

I am making a movie from images that were rendered with Maya, a 3D software.
When I import lets say 50 images , they all come in with a duration of 5 seconds each .
I figured out how to slow down their duration to 00:00:03
but I want them all to be 00:00:01, meaning, 1 frame per image, 30 images a second.
imovieHD only allowed me to reduce the photo to have a duration of 3 frames , no less!
How do I reduce the duration of all my photos to 1 frame or a 30th of a second?
Please help!

you posted in the iMHD section of this board.. which is vers. 5 (five).. you're using vers5 with 10.5. ?
in iMHD(5), project has to be DV or any other, but not iSight/mpeg4..
import one pic into timeline, uncheck KB, doubleclick the clip and set its duration to 00:00:00:01 .. following imports adopt these settings
in iM08/09 (I assume, that is your version...) 3 frames is shortest.
you need other apps to accomplish your task, QTpro, FramebyFrame, iStopmotion etc ..

How do you change the tempo on a track once you have started the editing process

I dont know why but i cant figure out how to change the tempo of a track after i have set it before creating the project and begin the editing process on it. i just want to be able to slow the song down because some times i miss the desired tempo range and set it to something completely contrary to what i am trying to do. Please help me because am new to thins. thanks.

Alieufromwa wrote:
how to change the tempo of a track project after i have set it
http://www.bulletsandbones.com/GB/GBFAQ.html#settempo
(Let the page FULLY load. The link to your answer is at the top of your screen)

How do I change the pitch for songs in iTunes?

I don't know how, but somehow I altered the pitch in my iTunes library. And now all of my songs sound like they're being sung by the chipmunks. Does anyone know what I could have done and how to fix it??? Please, I'd really appreciate the help.

Try this -> http://www.willwap.co.uk/Programs/vbrfix.php

How can i change the tempo of a track without changing pitch?

I did this before but for the life of me can't figure out how i did it. Usually when I change the tempo (BPM), the recorded tracks sound warbly. But on some of my projects, this doesn't happen even though they're "real" sound recordings.
Both projects are using Groove Fix and under "Pitch" I have "Follow tempo and pitch" checked off. Why is one project
changing tempo seamlessly while the other project is warbling along? Automatic tuning is not the issue because neither project is enabled for that.
Thanks,
Steve

The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties. I just found this thread that might better explain it:
http://hintsforums.macworld.com/archive/index.php/t-67538.html
I hope that helps!

¿How do you change the time of all images and do the chroma key effect in ¡Movie 10.0.2?

I know it's a simple question, but i had ¡Movie '08 and I bought the latest version, and it's really different, so I don't know, if i have like 150 photos (it's an stop-motion) how can I put the same duration? And do the chroma key effect? And I don't know why, all the images have the Ken Burns effect and I don't know how to quit it. Thanks for the help!
Marcireca

I solved the same time problem, but now the problem is that when i use the chroma key it automatic uses the blue screen effect, not the gren (wich I want). Please help! Thanks!

How do I change the pitch of all tracks in a session?

Similar Messages

Maybe you are looking for