How do I change the Prompt values in a rep sched to run weekly

My clients run reports on regularly, monthly, weekly, bi-annually you get the idea.  I want to know if there is a way I can automatically increment the date values to mach the run frequency of the report.  I want to make this as bullet proof as possible so if I can avoid manual input by the client that would be great.

Create date variable in Universe which calculates the days automatically and use these objects in the condition and schedule the report accordingly.
Eg: If you want to run a report  daily to bring previous 7 days data create an object in desinger with the def sysdate-7 (if it is oracle) and use that object in the condition. Then schedule the report. so whenever the report runs it brings the prvious 7 days data.

Similar Messages

  • How to batch change the standard value of routing

    Dear all,
             I meet a problem, and need you help.
            As you know, we can use T-code "CS20"  to batch change a component's quantity in different Bom by a factor.
           for example:  Component a in Fert. A,  quantity change from 6g x 0.9 = 5.4g
                               Component a in Fert. B,  quantity change from 8g x 0.9 = 7.2g
           now, my question is how to Batch change the standard value in routing. (select by work center)  CA85N can select the value, but seems can not batch change by a factor,
           thanks in advance

    It is not a big task for u prasobh...Just play in CEWB for 5-10 mins you will understand everything....
    If you face any issue let me know..
    For ur information I am also an IBM employee...
    Gobi

  • How do I change the property value priceInfo.amount?

    How do I change the property value priceInfo.amount?
    After changing the quantity field in the shopping cart and submit the form, I need to convert the field value priceInfo.amount and then set it again.
    How do I?
    Thank´s.

    Why do you need to convert this value and set it again?

  • How do I change the language back to english as it is running in chinese

    How do I change the language back to English as it is running in Chinese?

    On your keyboard, press the CTRL and the , (comma) keys at the same time
    You will see a box like this:
    Stay on the first tab (as shown) and select the drop-down menu as arrowed
    English (UK variety) is the fifth one from the top. US variety English is the sixth one
    Select your choice and click on OK
    There will be an additional piece of text under the menu now; it simply tells you that you need to close and re-open iTunes for the language change to take effect.
    That's it!

  • How do I change the language back to english as it is running in dutch

    how do I change the language back to english as it is running in dutch in error at the moment. I have uninsatlled and reinstalled itunes to no avail

    Launch iTunes. If you don't currently have your menu bar up, go control-B to bring it up. Now from the "Berwerken" menu select "Voorkeuren...", as per the following screenshot:
    That gets you through to the preferences tabs. Now in the "Algemene" tab, go down to the "Taal" drop down menu. Select one of the two "Engels" entries (one is English UK and one is English US), as per the following screenshot:
    ... and click "OK".
    Quit and restart your iTunes and you should now be seeing English again.

  • How can I change the initial value of the field approve_or_reject?

    Hello Workflow Gurus
    We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
    We are using the SAP Standard Workflow WS14500015.
    I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
    approve_or_reject EQ 0 i.e. Approve
    approve_or_reject EQ 1 i.e. Reject
    Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
    Kindly help me and let me know the procedure to change this.
    PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
    Thanks and regards
    Ankur Goyal
    09823448654

    Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
    Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
    PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
    CHANGES INTO STANDARD SAP WORKFLOW ???
    Modifying the standard workflow is not recommended.....

  • How can I change the default value of a command ?

    I want to be able to change the default value of a comand when the vi
    is running. (I know how to do that with a right click when the vi is
    not running).
    In fact I would like the user of the vi to be able to choose a new default value for a command.
    How can I do that ?

    You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
    Try to take over the world!

  • How do you change the amp value of a battery

    I am trying to make a voltage regulator for my car.
    My car puts out 14v and 500 amp battery.
    I can not tell Multisim that I want a 500 amp battery.
    How do I change the value?
    This is important because I have to make sure I have at least 15amps output. No way to do this so far. Program is worthless.

    Shane711,
    Most multimeters can only handle ten amps or less, so it is not surprising that yours burned up.
    How did you connect the multimeter while trying to measure the battery current? Cars have large, heavy wires connected to the battery because the large currents would destroy smaller wires. Your multimeter does not have connections or wires anywhere near as large as the battery cables. To measure the current you need to disconnect one of the cables and connect the meter in series with the cable. If you attempted to connect the multimeter in parallel with the battery as you would to measure voltage, you shorted the battery through the meter and probably had hundreds of amperes flowing, at least until a fuse blew or some wire burned out.
    Your specification for the voltage regulator does not make any sense. A voltage regulator has an output voltage specification - yours is 12 V. It also has an input voltage range specification. You did not specify an input range. The output current is determined by the load via Ohm's Law. The specification includes a maximum current - Is that what you meant by 15 amps? Some regulator circuits also have a minimum output current specification, often a few mA. Optional specifications include tolerances on voltages, power dissipation, transient response characteristics, and so on. The design of the circuit depends on all of these specifications.  You will probably not find a single device which operates as a voltage regulator with 12 V output at up to 15 A.  A regualtor like that will probably contain one or more power transistors, some ICs, resistors, diodes, capacitors, and inductors.
    Any simulator is only as good as the models used. From what Tien P. said in his earlier post, the battery in Multisim is an ideal voltage source. If so, it should easily produce currents of 1000 amperes. Just put a 12 milliohm resistor across the battery.  As I said yesterday, you will need to create a battery model circuit which has the characteristics you want in your battery.  What do you expect the output voltage to be at the battery terminals when drawing 1000 amps? What should it be with no current drawn? What should it be at 1, 10 , and 100 amps?
    Lynn

  • How does one change the "rollover" value in text field of fillable PDF

    I have a fillable PDF, and the values displayed when rolling the pointer over a fillable text field are showing some strange values.  I inherited this form from someone who is no longer with the company.  I need to be able to change the values but can't figure out how.  I'm new to LiveCycle so any help is greatly appreciated.

    I guess you are referring to "Tool Tip" you can update those in "Accessibility" Pallet...in designer you would access this by Shift+F6.

  • How can I change the length value of all notes in a score, .e.g., double the length, or halve the length)?

    I'd like to change the score of a composition so that the quarter notes are eighth notes, the half notes are quarter notes, the whole notes are half notes, etc.  Is there a way to accomplish this uniformaly, all at once, in Logic Pro 9?

    I am assuming that you have done a lot of work already on an Arrangement and now want to change the whole arrangement globaly.  Here is how I would do it:
    1 - Make sure your midi notes are all quantised and of uniform length whatever their note values. ( This applies especially  if you have played the notes in in real time from a keyboard which is likely that they will be uneven - so quantize the lot before doing this. If you have 'written' or dragged the notes in Step Time then it is not so critical)
    2 - Select all the regions and then grab the Right hand end while holding down OPTION and SHIFT - you will be able to drag all the regions to the same uniform length.
    3 -  Calculate the entire length of the regions you have already written and round them off to a set number of bars. Let's say for example the regions extend from bar 1 - to bar 16. You are going to reduce the regions to exactly half their length by OPTION dragging the regions smaller. That way you will get quarter notes halving to 8th notes. ( If it was the other way round you would OPTION drag the regions larger the other way)
    Hope that helps
    Best
    MS

  • How do I change the scale value ratios in Lion?

    If I use a larger monitor and want to scale down all the windows by 50%, how would I change this setting in Lion? I have plenty of desktop space with a larger monitor, but this does not really seem to help at all because all the windows are still taking up as much of the screen. When I manually drag the window smaller, the letters are still larger and require scrolling to read. When I press Command (- ), the text gets jumbled together and is not viewed as the screen should be. I would like to know how to just adjust the settings to scale everything down by 50%. I have tried typing some stuff into the terminal which I found via Google, but they do not seem to work on Lion. I would like to just have more desktop space and keep everything scaled down like on the larger iMacs. Thanks in advance for the help.

    Found it!
    Make sure you have multiple desktops already running.
    Go to System Preferences->Keyboard
    Choose Keyboard Shortcuts
    On the left select Mission Control.  On the right, I have "Switch to Desktop 1, Switch to Desktop 2, etc"
    On my iMac they were checked, and working.
    On my MacBook they were unchecked.  Checked the boxes, now it works.

  • How can I change the default value in IT0009?

    Right now in our system when we create a new IT0009 entry, several fields are defaulted such as the payee name, bank country, and currency (field WAERS). But in table T588Z I can not find anything defined for IT0009. Now even I create entries in T588Z ex. as 
    0009              WAERS     06     10     W     P0009-WAERS='USDN'
    the currency still shows up as 'USD' when I create a new record. Can anyone tell me where the field 'WAERS' is defaulted as 'USD' and how can I control this?
    Thank you very much.
    Best regards,
    Johnson

    Hi Johnson,
    Correct me if I am wrong,You need to default a value, so i guees you would need to use the feature P0009 not the dynamic action. If you could let meknow the current structure of the p0009 feature, may b i could help you figure the could-be structure of the p0009 to default the required value.

  • Wrong Apple ID: How do I change the Apple ID prompt when Updating All Apps?

    How can I change the (wrong) Apple ID from the password prompting dialogue when I am already signed in Apple Store with my own ID?
    More details of my problem:
    When I try the Apps' Update-All option in my iPod 4, the password dialogue prompts me with my girlfriend's Apple ID; YET, I AM signed in the Apple Store with MY own Apple ID.
    I have already verified my ID under Settings/Store. I have also signed out, signing back in with my Apple ID, just in case. No problems there, for I DO sign in with my own ID ok. The problem is just the prompt dialogue for password, when I try to use the 'Update All' feature it prompts me for password with her ID, not mine.
    If I go back to Apps and choose the Categories (or Top25) menu, at the bottom of the page, it shows me signed in (my Apple ID). If I try to update one Apps it will do ok. But if I try to Update All it will prompt me for password using her ID, waiting for me to type in HER password. I cannot change the Apple ID on that dialogue (static). If I use my password, it will return the "wrong password" dialogue.
    How can I change the prompt for the Update All? What is going on here that I AM signed in but my iPod prompts me with her ID. My iPod is registered under my Apple ID. I have already tried the Hard reset by pressing Home and Power buttons simultaneously, to no avail. I am also using my own network to go Online. I am also with the latest OS in my iPod and my Mac's iTunes.
    Thank you!
    PS This problem is not occurring in my iPhone 4 (same account) nor my Macs.

    Does not work for me. (My iPhone is not jailbroken.)
    I downloaded a paid app "Imray Marine Rules and Signals v1.5" in the USA with my original account (Account1) then moved countries and needed to create a new Apple account (Account2). If I get 'Info' for the app, it is registered to Account1.
    A new version 1.6 of the Imray app has now been released.
    I have set up only Account1 on the iphone (settings - App Store) and both Account1 and Account2 in iTunes on my computer. My iphone always tells me there is 1 app to update. However, when I try to update this app on my iphone, I get asked for the password for Account2, then the download fails as it says I do not have a paid earlier version to update.
    When I am logged into my computer iTunes as Account1 and try to update it on the computer iTunes, it says there are no apps to update (although my version of the app is definitely the old version).
    When I search for the app in iTune Store, it tells me I have already downloaded version 1.6 of the app and the download button is grayed out.
    If I temporarily delete the app from my iTunes then try to re-download, I am asked to purchase it again.
    If I log into iTunes as Account2 then try to download it, I am asked to purchase it.
    Any ideas? I feel I have tried every option and no success.

  • How do you change the value of the primary key in the CMP?

    Hi,
    The cmp that I built has the phone as the Prikey field.
    The bean has the get/set methods. The servlet invokes the cmp
    to change the phone number. How could I do that?
    The setXXX for the priKey can not be called outside of the ejbCreate() so
    how would I change the prikey value of a particular row of the table. Do I have
    to remove the bean then create the new bean with the new priKey value?
    Please help,
    Thanks

    Thanks Mona
    Tom.
    Mona Ramlawi <[email protected]> wrote:
    Hi TOM,
    The primary key is the unique identifier of an Entity Bean.
    To change it, you have to remove the bean instance = database delete
    then you have to create a new one with the new primary-key value =
    database insert.
    Hard luck tom, maybe you should consider changing your primary key. You
    can easily change it to an AutoNum
    Tom wrote:
    Hi,
    The cmp that I built has the phone as the Prikey field.
    The bean has the get/set methods. The servlet invokes the cmp
    to change the phone number. How could I do that?
    The setXXX for the priKey can not be called outside of the ejbCreate()so
    how would I change the prikey value of a particular row of the table.Do I have
    to remove the bean then create the new bean with the new priKey value?
    Please help,
    Thanks

  • How do I change the image size by pixels

    In the older version of photoshop you could change the image size and change it by pixels independently. With photoshopcc if I change the width the height changes. How do you change the 2 values independently to get the desired size?

    You'll want to use the Camera icon to upload your screenshot images when you reply.
    But jml007 has the answer I think you want. Change the units from inches to pixels and click on the chain link to turn it off and enter your W H values independently.
    Mark his answer as correct if this solves your issue.
    Gene

Maybe you are looking for