How do i change the screen resolution

I have the resolution on my computer set correctly. When I click on Firefox, the images are too large (wrong resolution). How do I set it for the correct resolution? I have my computer set at 1650X1080.

Give these a try and see if they help.
Ctrl + increases the size
Ctrl - decreases the size
Ctrl 0 (zero) resets to the default

Similar Messages

  • How do you change the Screen Resolution?

    I can not figure out how to change the resolution on my screen. Everything is much smaller than what i would like and would like to enlarge everything. There is a simple way of doing this with a PC but i have not been able to figure it out on a macbook pro.

    Go to System Preferences (under the Apple menu) and click on the Displays pane. If your machine is set for "Best for Display" tick the "Scaled" button and mess around with the different resolutions until you find one to your liking.
    Good luck,
    Clinton

  • How do I change the screen resolution on my Dell PC back to the original setting after itune change ?

    How do I change my Dell PC screen resolution back to the original setting after itune resolution changes

    Hi penguin05,
    Welcome to Lenovo Community Forums!
       First without the projector connected
               Right click on your desktop screen and select "Screen Resolution"
                 you will get this page
    Spoiler (Highlight to read)
    Now Connect your projector and make sure that the display is now on your projector.
       under Display: Set it to your projector
                 -Change the Orientation: to Landscape View then hit Apply.
    Let me know your findings
    Regards
    Solid Cruver,
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to change the screen resolution

    Dear All,
    Could someone please help and tell me how I can change the screen resolution (i.e. the dimensions of the monitor) in Solaris 10 using CDE?
    Regards and thanks a lot for your reply

    This site has some instructions on how to do this: http://solaris-x86.org/documents/tutorials/cde.mhtml

  • How to change the screen resolution in the Mobile Emulator

    so far we tried the Mobile Emulator in the netbeans, it is alway 240*320, but many real device is WVGA(480*800)
    whether does that mean the JavaFX Mobile only support the 240*320?
    if not, how can I change the screen resolution of the mobile Emulator, thank you

    I'd like to know how to do this, too. I tried fiddling with the "ScreenGraphics.bean" in the JavaFX\javafx-sdk1.2\emulator\toolkit-lib\devices\QwertyFxPhone directory, but without success.
    If anyone knows, please just drop a quick line here!

  • Is there any way to change the screen resolution in Front Row?

    Hi all,
    I've got a Mac Mini plugged in to my TV, and I want to be able to change the screen resolution depending on the content I'm watching (as some content is in 4:3 aspect ratio, some is in 16:9, and I'd prefer to have the picture filling the screen completely). Unfortunately, the TV doesn't have a "stretch" mode for making an 4:3 picture fit a 16:9 aspect ratio. If I know what I want to watch in advance, I can set the resolution accordingly using system prefs on the mac, but if I'm just sitting back choosing what to watch with the Apple Remote, it's annoying to have to leave front row, walk over to the computer and change resolution once I've decided what to watch, open system prefs, change resolution, re-launch Front Row and find what I wanted to watch again.
    So I was wondering if anyone had figured a way to allow the screen resolution to be switched from within the FrontRow UI. I've seen that people have written python based plug-ins such as PyeTV and Understudy that allow different types of content to be added to FrontRow, but I've not found any utility plug-ins such as what I'm looking for on the net (nor could I find SDK documentation on this API in the stuff that comes with XCode).
    I guess the other approach might be quick keys: has anyone had any success hooking up quick keys macros alongside front row in response to apple remote events? (seems too few events to be able to choose from, but I've never tried it, so I won't assume!) Or how about is there a way to trigger an AppleScript from within Front Row? And, of course, I'm very open to any other ideas you might have!
    Thanks very much in advance for any ideas on this.
    Andy
    Message was edited by: Andy__D

    Safe Boot from the HD, (holding Shift key down at bootup), set a good rez there.

  • How do I change the printer resolution?

    How do I change the printer resolution on my OSX 10.6.2 laptop?
    I have an ubuntu print server and it seems to only work at all using the gutenprint drivers. On my ubuntu client I had to change the print resolution from "auto" to 600x600 to make it work just fine.
    The best I can do is make the Mac print pages squished down to 1/4 size. I don't see the same resolution option on the Mac.
    Mac OSX 10.6.2
    Ubuntu Server 9.10
    Printer: Canon S900
    Cups driver: Canon S800 Gutenprint v5.2.3
    Cups version 1.4.2 on the mac
    Cups version 1.3.9 on Ubuntu Server
    Macbook Pro Mac OS X (10.6.2)

    I can't speak for the printer directly, but most functions to change resolution are in the dropdown menu at the bottom of the print dialog. It has a gray bar running through it separating the basic functions from the advanced settings.
    If you don't see that, but do see a blue button with a black triangle pointing down, click on that. Then you'll be able to set the advanced settings.
    Once you set up the printer the way you like, save it as a preset. If you want that as a default, see this [MacOSXHint|http://www.macosxhints.com/article.php?story=20100125135830153].

  • How we can recover the screen resolutions on maverick

    how we can recover the screen resolutions on maverick

    Hi
    Deleting invoice is a data base action that deletes the record from the table and won't right these records to any history tables. The only way is to re enter the invoice from hard copy. Where as Cancel invoice will behave differently.
    Is it manual invoice or invoice created from ERS etc?

  • How do i change the screen saver

    How do I change the screen saver. Thanks

    Here is a step by step guide on changing the screen saver.
    http://macdailytips.com/2013/02/18/change-screensaver-on-mac-os-x/

  • HOW DO I CHANGE THE SCREEN SAVER TIME?

    How do I change the screen saver tim e?
    jamesrhoads

    Here is a basic tutorial for Vista, it should apply to WIN7.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Is there a way to make the icon/words larger on the screen without changing the screen resolution?

    Is there a way to make the icons/words larger on the screen without changing the screen resolution?

    If you right-click in the top of title bar of any  Finder window there is an option to un-check 'use small icon size', though toggling between the two makes little difference on my screen.
    Another trick is you can zoom the whole screen by holding down the 'control' key and using a two-finger swipe up on the trackpad to enlarge, down to go back to normal.

  • My Apple TV 5.0.2 (4250) changes the screen resolution every 10-15 sec. Is there a way to solve this problem?

    Hi, My Apple TV changes the screen resolution every 10-15sec. The device is up to date and video setting are done correctly. It is connected to Philips 42pfl3507. What should I do to solve this issue?
    Thanks for your help.
    DucciP

    This sounds like a problem beyond resolution.
    I'd start by restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.
    If that doesn't help, try a restore.
    If the problem continues:
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Make sure your TV supports 720p (Apple TV 2)
    Try the Apple TV with another TV

  • How to change the screen resolution in Sparc workstation.

    I am using the CDE screen to login. I need to set the screen resolution to 1100*864. How to set?
    solaris 10 current setting is 1280*1024.

    Specs for Ultra20 machine list ATI graphics as " onboard " chipset and the availability of four (4) other plug-in cards as options.
    Depending on the installed graphics card, you must seek different commands, etc. for each change of resolution.
    If you do not have the original manuals that accompanied the unit, check Sun`s site for documentation. They list an abundance of info and the " Getting Started " book gives indepth details about setting up the various graphics options for proper use with the various operating systems. ....................... John.

  • How do I change the frambuffer resolution?

    On my laptop with Intel graphics I got the correct resolution automaticly, but on my workstation with NVIDIA I have 640x480 (?) on my 24" monitor. I havent find any usefull information about changing the resolution myself.
    How do I change the resolution myself?

    karol wrote:
    Gusar wrote:
    karol wrote:Nvidia closed driver doesn't work with KMS out of the box, nouveau does.
    What you refer to as "KMS" is an implementation detail. Like I said, nvidia has been doing modesetting in the kernel since forever. It's just that they do it only for X, while "KMS" is used by both X and framebuffer console drivers.
    It's the same with AIGLX, it's an implementation detail. Nvidia has had accelerated indirect rendering way before AIGLX came into existence. Likewise redirected direct rendering, that's also something nvidia had way before DRI2 was created.
    Oh, now I get what you mean. Nvidia has also it's own libgl implementation.
    Hund, what are you doing in the framebuffer that needs 3D? Why not use X?
    Nothing. I just use the frambuffer from time to time.

  • How do you Change the Tick Resolution?

    How do I change the quarter-note tick value? Like quarter note = 120, 240, or 480 ticks. Is there a global setting somewhere for that? Thanks!
    ~trevor

    Here's my workaround for non-destructive sample-accurate audio editing in the arrange window:
    Create a seperate region containing the edits you wish to make. (the smaller, the better.) Bounce this region to a new audio file. Open a new logic song. Before importing, change the tempo to 9999.0000, the meter to 4/1, and the division to 192. This results in a resolution of 31,996.8 ticks per second. Not quite 44.1, but enough to edit frequencies up to 16 kHz.
    Depending on the length of the region, you may want to increase the length of the song to 536 measures, the longest at this meter. This gives you a maximum region length of just over 51 seconds. Set your Snap to ticks. Then, make you track settings, import, and snip away.
    This gives you some undo and crossfades so you can audition and re-do your precise edits. When you are finished, bounce and re-import to your original song and replace the original region.
    Note: On my system, I have about 5 seconds of playback before I get an error message relating to synchronizing audio and MIDI, but it's enough to audition the edit/fade.

Maybe you are looking for

  • I used to get infinity but now can't?

    Hey, I've recently moved house and reluctantly said good bye to really fast and reliable net from virgin. However, before moving I checked to ensure I would be able to get at least some kind of fast internet. And yes I was, I could get upto 76mbps fr

  • 2.DMS uploading from Development server to Production server[GO LIVE]

    Hi All Is it all document type [dms] which r created in development server, these will transefer from development to production server by [uploading]transport request. Or is It needs Basiss Help. Rgds Ben.

  • Trying to import Adroid MP4 video to CS4

    (Originally posted on the CS5 form - was redirected to this one)) I took some video on my Andriod phone at 1280X720. (Samsung Epic) I try to import the resuling MP4 files it into CS4. Although it imports, it's very jumpy with poor audio sync. I can r

  • Purchase requisition Print out put

    What is the process or steps to Purchase requisition print out put in according to  client requirements

  • Login window in reudced mode

    is there a way to reduce the fan speeds, sleeping the display, and possibly put the disks to reduced mode while the computer is at the login window? i don't want to put it to sleep. my reason to want this is that i want the computer to still be acces