How do I Change the "Selected" Scanner in Adobe?

Whenever I try to scan in Adobe Acrobat I ger the error "The selected scanner was not found" However I can scan from within either hte Windows Fax and Scan and the Brother Control Center (The scanner is a Brother MFC 8480DN) I did a repair installation of Adobe Acrobat but no change.
Thanks - C2

In the pse 11 editor in Expert mode with the Brush Tool selected, click on Tool Options
and then click on Tablet Settings and select, for example, Size

Similar Messages

How can I change the default note in adobe reader

How can I change the default note in adobe reader

Can you please explain your issue in detail? Are you talking about sticky notes? What 'default' state would you like to change?

In the Menu Bar, under File, then Open File, how do I change the selections?

I have Firefox 11.0 and Windows 5.1 (2007). In Firefox, I click on FILE in the Menu Bar, then OPEN FILE (Ctrl+O), and I see a small box; it says Look in: Mozilla Firefox. Below is a selection of files within the folder Mozilla Firefox. To the left is a column of four other folders: Downloads, My Computer, John, Lori. The last two are obviously two of the folders I've created on my computer, using Windows. But I don't know how they got here! I have no recollection of customizing this particular Firefox menu option by adding those folders, nor can I figure out what to do in order to further customize it. Can anyone tell me: (1) how can I change the original "Look in" option so that it opens with something other than "Mozilla Firefox" (which, after all, I never need to access)? (2) how can I add/delete/change the choices offered in the column on the left, so that different folders are listed? (Currently, if I want to access my Windows folders/files, I first have to minimize the Firefox screen; this seems to me a nice shortcut, but I'd like it to include shortcuts to the folders I use the most, which does not include "Mozilla Firefox"!) (3) Is this actually a Firefox feature, or is it a Windows feature? It does look like Windows (Windows style, Windows folders), but it appears only in the Firefox Menu Bar, along with Bookmarks, Tools, etc. Thanks!

This sounds like a Windows thing ( You can post a photo and I can tell you for certain). Those folders are Windows system created folders that your computer has had since it was installed, all Firefox does is use the Windows File picker, which is what you see when you open that window. So, to customize you'd have to do that from Windows Explorer (not Firefox).
The Window should however remember what folder you were in last.

How can I change the 'selected' color of one JToggleButton only.

Hi,
This seems like a simple / trivial question, but I just can't figure it out. Is there a way that I can create a JToggleButton and change the selected color of only that JToggleButton.
I'm trying to create a simple sidebar like component for navigation within my app. A group of JToggleButton[s] added to a ButtonGroup (with the proper layout / sizing) works great, but the default JToggleButton colors don't suit my needs. I know that I can change the colors using the UIManager / UIDefaults, but I don't want to change the defaults for every JToggleButton in my app. I only want to change the defaults for a few select JToggleButton[s].
For example, I can do this:
UIManager.put("ToggleButton.select", UIManager.getColor("Table.selectionBackground"));
UIManager.put("ToggleButton.background", UIManager.getColor("Table.background"));but I'd rather do something like this:
JToggleButton jtb = new JToggleButton("Toggle Button Text");
jtb.setSelectedColor(UIManager.getColor("Table.selectionBackground"));
jtb.setBackground(UIManager.getColor("Table.background"));The only thing is, I can't find any method that is the equivilant of 'setSelectedColor(Color)' for JToggleButton.
I know I could do it by adding some listeners to the JToggleButton[s], but that seems a little complicated for something like changing a color.
I'd also seen a solution in the forums where someone had extended the ButtonUI of the pluggable look and feel they were using. I'm not interested in modifying the look and feel I'm using. As far as I'm concerned, that would defeat the purpose of having a pluggable look and feel as I would have to duplicate my efforts for every look and feel I want to use.
Any help would be appreciated,
Ryan

try this
import javax.swing.*;
import java.awt.*;
class Testing extends JFrame
public Testing()
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    setSize(250,75);
    setLocation(400,300);
    JPanel jp = new JPanel();
    JToggleButton jtb = new JToggleButton("Toggle me");
    jtb.setUI(new MyUI());
    jp.add(jtb);
    getContentPane().add(jp);
public static void main(String args[]){new Testing().setVisible(true);}
class MyUI extends javax.swing.plaf.metal.MetalToggleButtonUI
public Color getSelectColor(){return Color.BLACK;}
}

How do I change the selected text of a combobox on the fly?

Hi all,
I am trying to make a combobox, that is sort of a "recently used" connection box. So you can type in a computer name, hit connect and it then connects. When you disconnect, it adds the computer name, and the logged in username to the combobox,
so when you click on the drop down, you get selections for example : "COMPUTER1 - johnsmith"
Which is cool, but what I want, is to be able to click on the selection, and it only puts the computer name in the TextBox - i.e. "COMPUTER1"
So I have done a bit of research, and tried making a hashtable, and using the DisplayMember and ValueMember properties, so i can at least have a combobox selection like "COMPUTER1 (johnsmith)". I have tried many different pages and suggestions,
but the furtherest I have got is to only have one or the other value display, or it displays as System.Collection...... (can't remember the rest).
So my next attempt, is using an event handler for the combobox to change the text, so that once "COMPUTER1 - johnsmith" is selected from the combobox, it puts "COMPUTER1" as the selected text.
I have tried the following using the SelectedIndexChanged handler. Here is a snippet of my code relating to the ComboBox:
# PC Connection Input Box$global:pcInputBox = New-Object System.Windows.Forms.ComboBox
$global:pcInputBox.Location = New-Object System.Drawing.Size(70,50)
$global:pcInputBox.Size = New-Object System.Drawing.Size(210,20)
$global:pcInputBox_SelectedIndexChanged = {
if (($global:pcInputBox.Text -ne $null) -and ($global:pcInputBox.Text -ne "")){
$selection = $global:pcInputBox.Text
addLog("Selection is $selection")
$global:trimSelection = $selection.substring(0,$selection.indexof("-"))
addLog("TrimSelection is $global:trimSelection")
$global:pcInputBox.SelectedItem = $global:trimSelection
addLog("SelectedText is $global:pcInputBox.SelectedItem")
$global:pcInputBox.add_GotFocus({
$Form.AcceptButton = $pcButton
$global:pcInputBox.add_SelectedIndexChanged($global:pcInputBox_SelectedIndexChanged)
$Form.Controls.Add($global:pcInputBox)
I have also tried setting the $global:pcInputBox.Text but the result is that nothing changes. Its as though I can't change that ComboBox from its own event?? If I try setting $global:pcInputBox.Text from another function, it will do it fine.
Can anyone please recommend how I would get this achieved?
Thanks in advance
Adam Street

Use objects:
$o=@()
$o+=New-Object PsObject -Property @{Computer='COMP1';User='USER01'}
$o+=New-Object PsObject -Property @{Computer='COMP2';User='USER02'}
$o+=New-Object PsObject -Property @{Computer='COMP3';User='USER03'}
$combobox1.DataSource=[collections.arraylist]($o|select Computer,User, @{N='DisplayName';E={"$($_.Computer)-$($_.User)"}})
$combobox1.DisplayMember='DisplayName'
This can also be loaded from a CSV or from AD or almost anywhere else;
Here is another trivial example:
$o=@()
$o+=New-Object PsObject -Property @{Computer='COMP1';User='USER01'}
$o+=New-Object PsObject -Property @{Computer='COMP2';User='USER02'}
$o+=New-Object PsObject -Property @{Computer='COMP3';User='USER03'}
Add-Type -AssemblyName System.Windows.Forms
$form=New-Object System.Windows.Forms.Form
$form.StartPosition='CenterScreen'
$combobox1 = New-Object System.Windows.Forms.ComboBox
$combobox1.Location='70,50'
$combobox1.Size='210,20'
$combobox1.DataSource=[collections.arraylist]($o|select Computer,User, @{N='DisplayName';E={"$($_.Computer)-$($_.User)"}})
$combobox1.DisplayMember='DisplayName'
$combobox1.add_SelectedIndexChanged({[System.Windows.Forms.MessageBox]::Show($combobox1.SelectedItem.Computer)})
$form.Controls.Add($combobox1)
$form.ShowDialog()
¯\_(ツ)_/¯

I would like to change the project page layouts, but setup option in Project Superuser are not available. How can I change the selected page layouts?

Hi
I updated the page layouts for a project in Project Management. Now I woujld like to change those chosen page layouts, but the setup options for the project are no longer available for me to change. How can I update the original chosen page layouts (for performance management) to different layouts or change the chosen layouts to the default (blank) layouts?
Thanks
Chris van de Graaf

AppleMan,
It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
-L

Tab Set Label Colors - How do I change the selected tab label color?

No matter what color I tell it to use for the Labels - Selected color I get white. Is this a known bug in the system or am I not doing something correct. I have a tab set component and a label based menu selector component on my display. I've set up the labels and backgrounds for both components exactly the same but I can only get white for the selected tab set label.
Edited by: Maureen LaComb on Feb 19, 2009 5:38 PM

Hi, Maureen
You can set the color of Tab Set by using the Following Steps.
--> Select the Tab Set
--> From the the Properties Window
--> Select Appearance
--> There are Two Tabs "Text" and "Color"
--> From the Color Tab you can Select the Background Color
--> Tab BackGrounds Or Labels from here you can select the color.
But this setting will Apply to all the Tabs in a Tab Set, I think you can't set the Specific Setting for a single Tab in a Tab Set.
Please Reply if any Issue,
Kind Regards,
Faisal

How do I change the pen pressure in Adobe Elements 11?

I bought Adobe Photoshop Elements 11 in the hopes that I could finally start to draw and color lineart, but I don't know if it's an old and/or atypical version or what, cause I've tried like four or five different tutorials on how to change the pen pressure so that the thickness of the line you draw depends on how hard you push the pen. In all of these tutorials however, I only get as far as to the third or fourth step before they tell me to click an option I don't have. Now I hope that I just haven't found the right tutorial yet or pen pressure can't be modated in Elements 11??

In the pse 11 editor in Expert mode with the Brush Tool selected, click on Tool Options
and then click on Tablet Settings and select, for example, Size

How do I change the font size on Adobe Reader 8.1.2

I recently purchased an HP laptop running Vista. It came with Adobe Reader 8.1.2. I can't change the font size in a form that I am filling out. I can cut& paste a different font size into the form but not change the font size. Someone said that it is a free download so I won't be able to change the font size. Does anyone know a fix?

To change the font size in PDF forms, one needs to have Adobe Acrobat rather than Adobe Reader.

How do you change the Selected Email Client

I have created a form that submits XML data by email.
The first time you click the "Submit by Email" button, a dialogue box opens up and asks you to select one of 3 options: "Desktop Email Application", "Internet Email" or "Other".
The problem that is occurring is that people will either not read the statement or out of ignorance select "Desktop Email Application" when in fact they have internet based email. There is no apparent way to go back and reset this preference.
Does anyone know where this preference is stored and how to change it?
Alternatively, does anyone know how to generate the XML file by an alternate method that could be saved and then attached to an email?
This has been a major problem that has prevented the use of this form, any help would be greatly appreciated.

This setting is handled by your Operating System. On Winddows (Win7) you go to Control Panel->Programs->Default Programs->Set Default Programs. On OS X you set this using the preferences of you email client. For example launch Mail and go to Mail->Preferences->General. The first setting is for default email client.
Hope this helps.
Jeff Canepa
Software Quality Engineer
Adobe Systems, Inc.
[email protected]

How do you change the text direction in Adobe InDesign CS6?

My version is the middle eastern version and i don't want my punctuations to go to the start of the sentence. Also, i went to preferences>type and i can't find the text engine option so i'm lost right now.

Try Mail Preferences/Junk tab and under " When Junk Mail Arrives" click Performe Custom Action then advanced
you will see the option for colors.
Hope this helps

SV004 - I need to change the selection condition in the view: J_1BT001W

Hello guys,
Can you please help me with a topic ?
How can I change the selection condition in the view: J_1BT001W ?
I was trying to use se11, but says that J_1BT001W does not exist.
Thanks a lot,
Jordan

Hi Jordan,
The correct view name is J_1BT001WV and not J_1BT001W. It is made of table joins - T001W T001K T005. Please let me know if this answers your question.
Regards
Ram

How do i change the default hand tool to select tool when a document opens? also how do i get it to open in a single page view instead of 2 pages side by side

how do i change the default hand tool to the select tool when i open a document.
how do i change the view from 2 pages to a single page?

Try setting the check boxes in Edit>Preferences>General for the following:
- Make Hand tool select text & images
- Make Hand tool read articles
- Make Hand tool use mouse-wheel zooming
Adjust these as needed but does it make any difference?

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

How can I change (or select) what is being being used when I share, as the file cover. When I Share lets say "Master File" i want to select a frame that is used as the file cover. So when its on my desktop I see this image as the file icon.

I don't think Finder does this (I've tried).
iTunes does though. Where you can set artwork or the "poster frame"...
This may not be what you want but if it helps, I know 2 ways do this is
Open the video in QuicktimePlayer7 | View | Set Poster Frame (even then, you might need to save it as .mov (ie in a 'mov container').
Drag the file into iTunes and set the artwork (as in http://www.dummies.com/how-to/content/adding-album-cover-art-or-images-in-itunes .html)
From there, iTunes will use that frame as the "poster frame" ie the photo/frame that shows when you browse your videos. Which is what you want, but limited to iTunes.
When I do either of these above, the frame I set does not show when exploring files in "Finder" (or in the other Explorer tool I use called "Pathfinder").
So it maybe, that exactly what you want, is not possible.

How do I change the settings on my ipod so that it plays continuous music. Right now, it plays the same song over and over, even if I select the shuffle icon. It used to show the continuous play icon, it doesn't anymore.

How do I change the settings on my ipod so that it plays continuous music. Right now, it plays the same song over and over, even if I select the shuffle icon. It used to show the continuous play icon, it doesn't anymore.

Right click on a movie(in iTunes), and click "get info" then go to album artwork and add the artwork that you want...
-Messymeese

How do I Change the "Selected" Scanner in Adobe?

Similar Messages

Maybe you are looking for