How do I change the 'Sent' folder to display the persons name I sent to and NOT my name?

Today BT Mail told me my BT Internet account had been migrated from the old Yahoo (defunct) account to their own new BT Mail. So I am using IMAP and therefore had to delete my account on my devices and set up again in order to continue to receive my mail.
I have duly followed their instructions and done this, and synced my calendar and contacts using their 'how to' web pages....
Now I am checking everything is ok.... and note that the 'Sent' folder now lists all the emails that I have sent under MY name. So if I'm looking for an email I sent to a particular person, I can't really, as all the emails are listed in my name. I have to open each one to find out who I sent the mail to. Very time wasting.
I have yet to update my iPhone with the same instructions - dialogue box currently stating 'cannot get mail' until I update the settings.... But I can see the 'sent' folder is showing sent emails in a list displaying the recipients' name... As it should do.
Question: How can I flip the display round to list the recipients' name in the sent list? I have looked but can't see how to do it. Thanks.

Each account should have its own sent folder. Since mails may be sent from different accounts through different servers.
If you have moe than one account, and send mails from more than one of them then you will a sent folder for each account you sue to send emails from.
As to the names, it will show techncially the first recipient in the list or recipients iof there is mor ethan one. If that happens to be you then it will show you.
As to how to edit, there should be an edit link to the right of the original post.
For further posts the link appears at the bottom of the relevant post. This may not be visible if you are viewing the forum on the iPad only on a computer browser.

Similar Messages

HT1766 HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER?????

HOW CAN I CHANGE MY BACKUP FOLDER FROM THE C DRIVE TO ANOTHER????? because my c drive in the windows computer gets filled and i need to back up my ipod to a portable hard disk.. bt i dont know how to do it.. plz help

you can't change the backup folder as far as I know, but you can choose to move backups. The information you need can be found in this article: http://support.apple.com/kb/ht4946
Where iTunes backups are stored on your computer
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
Hope this helps
Regards,
Stijn

HT1364 Due to lack of space on my c drive I decided to move my music folder to the d drive. After I done this I changed my mind and put the music folder back on the c drive and now my itunes music and playlists etc. are missing. How do I get them back?

Due to lack of space on my c drive I decided to move my music folder to my d drive. After I done this I noticed all my music was gone from itunes so I decided to move the music folder back to the c drive to try fix the problem. All my music and playlists etc are still missing from itunes. Any suggestions on how to fix this problem???

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

I have copied over my music file to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit Preferences has the right location

I have copied over my music files to a new computer and the music shows on itunes but wont play. When I track where the song is located it is reading the wrong information. How do I change this as Edit>Preferences has the right location?

Select one of the tracks with a broken link, press ctrl-i to Get Info. Say No when iTunes asks if you would like to locate the track, then look at the Summary tab for the location expects to find the file in.
Now try to locate the file in question. The two locations should give a clue as to what to do next.
Here is an example with a file I've deliberately moved from the new layout to the old pre-iTunes 9 layout.
This means iTunes is expecting to find the file at:
D:\iTunes\iTunes Media\Music\a-ha\Take On Me\01 Take On Me.mp3
but it isn't there because I've moved it to:
D:\iTunes\iTunes Media\a-ha\Take On Me\01 Take On Me.mp3
which is where it would have lived back in iTunes 8 (though the media folder would have been called iTunes Music back then as well).
If you can provide the expected and actual locations of a broken track I should be able to suggest the easiest way to resolve things.
tt2

How do you change/adjust border width for all the cells in a table created in Pages?

How do you change/adjust border width for all the cells in a table created in Pages?
Note- I am trying to figure out how to create and format tables in the latest version of the Pages app on an iPad air (iOS 8.1.1.1) . Creating tables, adding or removing borders for individual/all cells in a table seems straight forward. However the default border style seems to be a heavy black line. How do I change this?
I found the option add or remove borders for all/ individual cells in a table, however I can't find any option within style/format dialogue screens for changing colour or line thickness for table cells. Likewise I can't find any clear instructions on how to do this in apple help pages or support website
Btw- I'm assuming it is possible to customize/adjust the colour & thickness of selected lines in a table created in this app (it's fairly easy to do this word processing apps like MS Word) please let me know if this is not actually possible in Pages

They know perfectly well what they took out of Pages '09.
Well over 90 features.
Do you think you posting feedback is going to remind them of what they did?
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

How do you change Site/Root Folder?

How do you change Site/Root Folder? I have looked for ages,
but i can't find how to change the root folder, it keeps trying to
put everything in my first websites folder. Please Help.

> it keeps trying to put everything in my first websites
folder
when you start a new project, you need to make a NEW site
definition for it.
dw menu->site->manage sites New site
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Using a Mac with Mavericks how can i change a desktop folder' name?

using a Mac with Mavericks how can i change a desktop folder's name?

click on the folder, then click on the name again, you'll see the name field changes so you can rename it

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

I have most of my music stored on my old iphone. i bought a new I pad, and signed up with a new e mail adress as my old one is defunct. How do i change my e mail adress to the new one, because it keeps telling me apple id already in use.

I have most of my music stored on my old iphone. i bought a new I pad, and signed up with a new e mail adress as my old one is defunct. How do i change my e mail adress to the new one, because it keeps telling me apple id already in use.

You can change the primary email address on an account by logging into it via the 'manage your apple id' button on http://appleid.apple.com, or via the Store > View Account menu option on your computer's iTunes, or by tapping on it in Settings > iTunes & App Store on your phone and logging into it.
You won't be able to change it to an email address that is being used an alternate or rescue email address on the account (they can be viewed/changed/removed via http://appleid.apple.com), nor to one that is currently being used as the primary email address on an account

HT204053 how do i change my icloud email address from the one i already have input?

how do i change my icloud email address from the one i already have input?

Hi sparkie,
You cannot change your iCloud email address. It is an @me.com address, and is associated specifically with that iCloud account. If you want a different @me address assigned, you have to delete the current iCloud account and set up a new one.
Here is a link with all the support information for iCloud:
http://www.apple.com/support/icloud/
Hope this helps!
Cheers,
GB

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I have Adove Reader XI. All my files have a picture as the first page. I used to be able to see the picture for each file. Now all I see is the PDF logo. How can I change this so I can see the pictures instead of the logo?

I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?

Windows 7

How do I change my default search engine in the URL bar back to Google after my ISP replaced my default search engine with their own?

Before I changed internet service providers, I could type my search queries into the url bar and receive search results from Google. After I switched ISPs, my queries typed into the url bar are put into my new ISP's horrible search engine. How do I change it back?
I've already tried going to about:config and changing the value of the keyword.URL preference to "http://www.google.com/search?ie=UTF-8&oe=UTF-8&q=" but that didn't fix my problem.
New information since creation of the post:
My ISP is Optimum. I have opted out of DNS Assistance and still have seen no change.
When my search term is two words or more, I am directed to Google search results. If my search term is only one word, however, I am still directed to Optimum's search results.

Hello samshine, try to reset the '''browser.search.defaultenginename''' in about:config and check it again.
thank you

HT5731 How do I change my iTunes settings to lower the resolution of movies I download to reduce the download time?

How do I change my iTunes settings to lower the resolution of movies I download to reduce the download time?

If you're buying HD movies, you can change the setting in the Store preferences in iTunes to prefer 720p. Or you can just buy SD versions.
Regards.

What is the default length of time that a deleted email will be retained in the email trash before automatically deleting it? How do I change that default? I follow the instructions in the manual, but when there is no "advanced" to click on.

What is the length of time that an email will be held in the email trash after being deleted? Also how do I change this default? I follow the instructions in the manual until it says to click on something called "advanced." There is nothing like that on the screen so I am stuck.

Go to Settings > Mail
Then tap on your account.
SCROLL DOWN TO ADVANCED and tap advanced.
Then look at Deleted Messages > Remove
Tap on Remove and select the amount of time you want.

How do I change the 'Sent' folder to display the persons name I sent to and NOT my name?

Similar Messages

Maybe you are looking for