How do I change the timezone in which firefox is set?

My email, and other time stamped online transactions are always 3 hours behind my actual time. The time on my laptop itself is set correctly but on firefox the time is always 3 hours behind the actual timezone in which I live, Eastern Standard Time. Thank you!

See also:
* http://kb.mozillazine.org/Time_and_time_zone_settings

Similar Messages

  • How can we change the purchasing group which it is maintained in R/3?

    Hello All.
    In case of MM, purchasing group is assigned to material master.
    It means purchasing group is maintained based on material code.
    But SRM has different maintenance level.
    As you know that purchasing group has the responsibility based on material group (Product category).
    So we should change the purchasing group from R/3, when end user create shopping cart.
    How can we change the purchasing group which it is maintained in material master?
    Thank you,
    Best regards,
    SH.

    Hello So Hee,
    I am not a technical guy.
    But for your requirement i am building a logic.
    I am not sure whether it will work.
    You need to check with your ABAPER.
    It is as below:
    When the SC is approved and the other configuration is correct ,
    PR is created in ECC by the virtue of BAPI.
    You want that the pur grp should be populated on the base of matl code and not on matl grp.
    Hence in SC you will not fill up pur grp.
    In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
    This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
    Now in the BAPI you need to incorporate this additional value of yr pur grp field.
    So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
    Again: this is all hypothesis.
    That's all I can help you.
    BR
    Dinesh
    <b>Reward if helps</b>

  • HT1689 How do I change the frequency in which I enter my password when purchasing/downloading from iTunes?

    I changed the settings and now I cannot figure out how to change them to the default setting. How do you change the frequency in which you enter your password in iTunes?

    I don't use restrictions but check ..... Settings>General>Restrictions>Allowed Content>Require Password.

  • How can I change the order in which songs appear in my iTunes Music Library?

    How can I change the order in which songs appear in my iTunes Music Library?

    Kay,
    If you are looking at the entire music library ("Music") you can sort by any of the columns by clicking the column header.  If there is a column you can't see, enable it by going to View > View Options.
    Within a playlist, you can do the same, and in addition you can click above the column of sequence numbers, which will then allow you to drag tracks up or down to get any order you wish.

  • HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    You are most welcome

  • HT204053 I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?

    See https://discussions.apple.com/message/19218571#19218571.

  • How do you change the shortcut keys for Firefox in Welsh For Mac?

    I'm using Firefox in Welsh on Mac (asking in English to hopefully get more answers), and every time I try to do the shortcut for copy (cmd+C), it hides the window (since Hide in Welsh is Cuddio, the shorcut for that is now Cmd+C). I usually forget this, and proceed with using the shortcut for copy only to anger myself when I realise that I've hidden the window.
    My question is, how do you change the shortcut keys on Firefox so then I can change the Hide shortcut and give Copy the cmd+C shortcut? I'm also using OpenOffice.org in Welsh, and they are using cmd+C for copy and cmd+H for Hide.
    Is there any way that I could do this myself? Its rather annoying for me, and its rather weird to use Cmd+X for Cutting text instead of copying.
    Thanks.

    This could be worth a bug. It shouldn't happen that some shortcut keys get (re)used for other actions and Cmd + C should be considered as one of them.
    You can try to make the change in this file: cy.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Cuddio &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "C"></nowiki></pre>
    English language pack: en-GB.jar/locale/browser/baseMenuOverlay.dtd
    <pre><nowiki><!ENTITY hideThisAppCmdMac.label "Hide &brandShortName;">
    <!ENTITY hideThisAppCmdMac.commandkey "H"></nowiki></pre>
    You can find the file cy.jar in the chrome folder in the Firefox application folder.<br />
    The file cy.jar is a ZIP archive, so you need a program that can open such an archive and edit the file baseMenuOverlay.dtd.
    I'm not on a Mac, so can't do any testing in this matter. I just downloaded the Welsh (cy.xpi) language pack for Mac and had a look in it.

  • ?? How do I change the info i put in during set up?

    I will be selling my macbook to someone--how do i change the info i put in during set up (such as address, name, phone number, etc.)?? I feel a lot safer to sell the macbook without those info in the computer.

    Yes, you are doing the right step.
    Insert the installer disk, and it will asked you to
    restart, and it will restart from the disk.
    After you choose the language, it will comes up with
    installer screen, but don't choose install yet, go to
    finder menu bar and select utilities > disk utilities
    and erase and choose more option and check zero all
    data.
    After you done that (it will took hours to do so,..be
    patience), then you can start to re-install the OS.
    Good Luck.
    you lost me after erase...where do i find more option and zero all data

  • How can I change the ENTIRE look of Firefox?

    How can I change the ENTIRE look of Firefox? I.e. I want to change all icons that appear in the browser - the loading "gif" the firefox...well... fox of fire in the "about" page, etc. Also what text shows up, for example on the "about:robots" page, and when hovering over a button, etc.
    I could do something like that with an earlier version of Firefox, and I found the quotes from the "about:robots" page in the "omni.ja" archive, extracted, changed them and replaced in the original archive, along with other icons, however they do not seem to be implemented. :/
    I do not mean changing the desktop or .exe icons, already did that.

    You can make a theme, https://developer.mozilla.org/en-US/docs/Themes

  • How can I change the order in which photos are presented on an Apple TV?

    I am showing photos on my Apple TV via my Apple MacBook, iTunes and Home Sharing.
    That all works nicely for me, except that I wish to change the order in which a few photos
    are being presented.  How can I change the presentation order on the Apple TV?

    Welcome to the Apple community.
    You'll need to change the order in iPhoto. Open the album you wish to re-order, manually sort them to the order you want, then use the time and date and batch change options as applicable from the photos menu to retag your photos.

  • How do I change the folder in which Mail saves sent e-mails (On my Mac)?

    If I send an e-mail from my iPad, te e-mail is saved in "sent items". However, if I send an e-mail from my Mac, with mail, the e-mail is saved in another folder: "Sent Messages".
    I know I can easily change the folder in which the iPad saves sent e-mails, but I would like to change this setting on my Mac, so that the Mac saves sent e-mails exactely where the iPad saves snet e-mails.
    Is it possible to change this setting on the Mac?

    Bryan.O wrote:
    Is it possible to change this setting on the Mac?
    There might. (Stress, might.)
    Quit Mail.
    Make a backup of <~/Library/Preferences/com.apple.mail.plist>.
    Open it with a suitable text editor (eg, TextWrangler), or plist editor (eg, Xcode, Pref Setter).
    Look for the key "SentMessagesMailboxName". Replace the string "Sent Messages" with what you want.
    Repeat for every such key. Save.
    Launch Mail. Test. If anything goes wrong, replace com.apple.mail.plist with the backup.
    Warning: I have not tested this myself, so I don't know if it works and/or if it causes any problems.

  • How can I change the language interface of Firefox 4 Beta to English (on Swedish OS)? Can only find different language versions for 3.6.8.

    How can I permanently change the language interface of Firefox 4 Beta to English?
    Computer is running on Swedish Windows XP.
    Found that the advice on similar questions is to install the language version of the desired language on top of the current version but I haven't found different language versions for 4 Beta, only 3.6.8.
    Have also tried to change general.useragent.locale (about:config) to en-US but to no avial.

    Hello,
    If somebody has installed the multi-language package is there a possibility the language to be changed without reinstalling the browser?
    Best regards,
    Yuli

  • How does one change the folder to which scanned images are saved?

    Using a CanoScan 9000F Mark II scanner
    Using the ScanGear driver software that came with it
    Right now every time I scan something, it is automatically saved in "My Documents", and I have to drag and drop the file where I really want it to go. How do I change it so that the file is saved where I want it to go in the first place. Also, it is automatically assigning a file name so that I have to go to the file and change that to what I would like it to be too. How do I make it so that I can name the file before it gets saved. Neither do I see where it gives me the option to choose the format in which the file is saved; it is saving the files automatically as JPG, but I would like to save them as TIFF or BMP.
    These seem to be very standard options; so I don't know why I'm finding it so hard. I must be blind or something.
    Thank you for your time and assistance.

    Hello barbarossa,
    Great question!  You can change all these settings through the My Image Garden software.  The exact procedure will vary depending on the version of Windows you are using.
    If you are having any difficulty locating this software, feel free to visit the link below to let us know your operating system and we can follow-up with step-by-step directions.  Thanks! 
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Should be a simple one: how can I change the website pagename which appears in the browser?

    You see: after company there is a vertical line Design is Fun..... This should not be added. It appeared when I used a sample version, but I don't know how to remove it...
    Anybody?

    The problem was: how to change the "page title suffix"
    Sometimes knowing the name of the problem = solving...;-)

  • How can I change the directory in which I install oracle-xe-universal?

    Because I need to install it into my ssd which is mounted in the other directory.
    I know I can install the rpm package by relocate the root, but it won't work.
    Where I can just change the directory where to install the oracle-xe?
    Thanks a lot.
    Best rgds,
    Robin

    Kay,
    If you are looking at the entire music library ("Music") you can sort by any of the columns by clicking the column header.  If there is a column you can't see, enable it by going to View > View Options.
    Within a playlist, you can do the same, and in addition you can click above the column of sequence numbers, which will then allow you to drag tracks up or down to get any order you wish.

Maybe you are looking for