How do I change the value labels in a line graph without changing the data in the source table?

Where the graph values show 1 I want them to change to text (different each time). Is there a way to make this happen?
Also, is there a way to connect the series markers - circles - with solid lines even if there is no data in the table. E.g from 1.5 to 2.5 a solid line even if there is no data under 2.0?
Is there perhaps a better way altogether to achieve this graph?
Thanks.

HI Mick,
Sounds like something that could be achieved with no "graph" at all.
This is a combination of a table and an inserted shape (line). Enter the dates as the goals are achieved. Here's a second image of the same 'chart,' taken before the table grid was whited out:
Regards,
Barry

Similar Messages

How do I remove the drop shadow from the value label on a bar chart?

All of the shadow settings are disabled for the value labels, and for the chart in general, but the shadows still show. Any ideas on how I can remove them?

ensure you have selected the label, not the graph:
shadow on:
shadow off:

How can I change the year of an album in itunes11 without changing the years of all titles?

How can I change the year of an album in itunes11 without changing the years of all titles. For example: the reissues of an 1982 album has a 1995 bonus track, but I want it to be sorted as an '82 album? In earlier versions, when itunes sorted my album "by year", it took the year of the first title as the album's year (which makes a lot of sense). In itunes 11, however, the /highest/ year of any title in an album is taken to be the album's year. This upsets my entire catalogue. Can this be changed, will this be changed?

Highlight all of the songs,File>Get Info, change the genre

Change the background color of a particular word without changing the background color of the rest of the text in a textbox

Hello,
I'm designing my own website and want to know how to change the background color of a particular word without changing the background color of the rest of the text in a textbox. If i can't do this, how can I create a Table, similar to Excel with iWeb?
Thank you very much!
Roger.

If i can't do this, how can I create a Table, similar to Excel with iWeb?
Read this :
     Create and add a TABLE in iWeb »
     More about a TABLE in iWeb »
     Sample 1
     Sample 2

Can the position of a vertical line object be changed in run time

Post Author: KennyG
CA Forum: General
I added some vertical line objects into my report in design mode, but the position of them can't be determined until the run time. So I have to change the position dynamically, such as " lineObject.Left = 200; ........" . But I'm confronted with an exception, System.Runtime.InteropServices.COMException, and it says that " The line object's coordinates are not valid. Only vertical or horizontal lines are supported.". Finally, can the position of a vertical line object be changed in run time? if can, how to do it??
Any suggestion will be greatly appreciated.
Thanks

Making buttons move is my thing. Attached you will find VIs that make advanced use of the postion property.
Attachments:
Moving_Menu.llb ‏176 KB
event_canon1.vi ‏139 KB
Flying_boolean_around_flying_boolean.vi ‏54 KB

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

Does Firefox switch to full screen if you press F11 ?
You can also try the F10 key to see if that brings up the menu bar.
* If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

What are the disadvantages of implementing APO- Demand Planning without improvements or cleaning up the MRP. in other words is DP implementation dependant on MRP process. Gurus please advise

HI All. What are the disadvantages of implementing APO- Demand Planning without improvements or cleaning up the MRP. in other words is DP implementation dependant on MRP process. Gurus please advise

Hi Amol,
DP is the demand planning machine, here you estimate your forecast (future sales).
The MRP is a supply planning machine, here you use estimate the replenishment.
Both machines in a technical perspective are independent one each other. Now in a business perspective they are not: The problem that you will have if you don´t clean your MRP elements is not a problem in DP itself. I mean, you can have a very success implementation in DP, your forecast accuracy will be very good.. and you will get a very good forecast, but when the MRP run and estimate the replenishment, the effort that you made in DP will not be translated in good results and your planning situation will be still not good.
Kind Regards,
Mariano

When i change the value of a combo box using a property node it displays the value not the item label

I am using a combo box as a select list for text serial commands. I have items like "engineering", "GUI", and "Scan" for the commands "MDE", "MDN", and MDS respectively which i have input as the corresponding value in the combo box. so for example the label "engineering" has the value "MDE" in the combo box items list. when the Vi starts it needs to read the current value MDE, MDN, or MDS and then i want it to display on the front panel the item text corresponding to that command value.
To do this i have tried to read the serial command, ie MDS and then wire that to a "value" property of a property node of the combo-box, but instead of displaying the corresponding item label, "Scan", it displays the value "MDS" on the front panel instead. i want the front panel to use the label text when choosing and displaying but the block diagram to use the serial commands. Can this be done with a combo box? I'm trying to use a combo box so i can keep it all text and avoid having to build a case statement to convert enums or rings from a numerical value to the text command.
The correct text value is wired to the value property and it does exist in the combo-box. I have unchecked "values match items" and selected to not allow undefined values.

Don't use the value property node. Use the Text.Text property node. When creating the property node, select Text, then in the next pop-up box, select Text.
- tbob
Inventor of the WORM Global

How to get the value from a cell in jTable without click "enter" or "tab"

Hi guys,
I have a simple question. I have a jTable in my screen and when editing a value, but without click "enter" or "tab" I want to get the new value. I have a button update and after editing the value I click the button "update" and I want the new value to be store in my table. If try to get the selected value it is giving the old value. How can I implement this? Any idea? I hope I was clear.
Thanks

[Table Stop Editing|http://www.camick.com/java/blog.html?name=table-stop-editing]

How to changing char. values and create new lines in C_TH_DATA

Hi experts,
we need to distribute the cost of some sender costcenters to the corresponding receiver costcenters.
We have already created a DSO and maintained this with the sender and receiver costcenter. We use this lookup table later in the execute method of our created planning function type to take the sender costcenter and distribute this to the corresponding receiver costcenters.
I've already implemented an IP planning function based on planning function type for this process.
At the end when I debug the method I see that this works fine. I give you an example:
I have in my lookup table the following record:
sender costcenter           receiver costcenter            distribution percent
4711                                    4712                                    75
4711                                    4713                                    25
Based on those records in the lookup table I've to distribute the cost of sender costcenter to the receiver costcenters.
Just imagine I would get this record from c_th_data:
sender costcenter    costelement     value
       4711                 3000111         100
I have to have the following result after running the exit planning function:
   costcenter    costelement     value
       4711                 3000111         100                   -> without changing
       4711                 8000111        -100
       4712                 8000111           75
       4713                 8000111           25
When I debug the exit function I see in the execute method that c_th_data will be filled correctly. I see exactly the records that I want to see.
But once the function is finished I don't see this result. I also checked the conversation
Changing Char Value in IP C_TH_DATA
but I can't understand what happens after my coding yet.
Can anyone help me or give me an advice what could be the problem here?
Thank you all in advance for your support.
Kind regards,
Ali

Hi Ali,
The planning function generates the records in delta mode. I am explaining the concept taking your example only:
Records in cube before running PF:
sender costcenter           receiver costcenter            distribution percent
4711                                    4712                                    75
4711                                    4713                                    25
sender costcenter    costelement     value
       4711                 3000111         100
       4712                 3000111         100
       4713                 3000111         100
The records that you need to generate from code(Previous ones need to be changed):
sender costcenter    costelement     value
       4711                 3000111         000
       4712                 3000111         175
       4713                 3000111         125
**Please note that you dont need to generate any corrections(delta records), you only need to generate the final values in the records and the PF will generate the delta's on its own. Also in this case you should see 3 Records Read, 0 Deleted, 3 Changed.
Please let me know if you need any more clarification,
Thanks,
Puneet

How to insert the value axis in a EXCEL graph

Hello,
how can I do to insert the value axis (name) and graph tilte in a EXCEL graph using report generation in LabVIEW??
I'm using excel specific functions, but I don't find it anywhere.
THANKS.

Hi,
the function Excel Set Graph Font.vi has an input parameter called Title that corresponds to the name of the axis selected through Axis Type parameter.
And the funtion Excel Insert Graph.vi has an input parameter called Graph Title.
You can see an example called Column Graph (Excel).vi in Find Examples>Toolkits and Modules>Report Generation.

How do I get iTunes songs off the iCloud back onto my computer, preferably without changing the purchase date to today's date?

Trying to download previously purchased iTunes songs that are firmly embedded in the iCloud. At one point these songs were all on my computer. Then I idiotically joined iCloud. All the songs were sucked off and into iCloud. iCloud couldn't provide more than twenty seconds of any song without freezing whatever device, Macbook Pro, iPhone 4s, ipods, or breaking up the playback into fits and starts and finally silence, ever, no matter if the connection was cable or wireless.
I have ever update on every device, I have the max. RAM, excess disk/flash space. The problem is the difficulty of downloading. Oddly the download to my ancient PC went almost without a hitch, it is with Apple devices that the trouble lies.
About 2/3 of the songs have successfully downloaded to my computer. However the purchase date, which I used frequently as a search/sort function, have on many of the songs been switched to today's date, or the date of the latest download instead of my original purchase date.
Many songs downloaded, many remain in the cloud with the 'cloud' icon beside them.
Clicking on the "download all" icon doesn't download them all.
They begin to download and then stop/freeze.
I'm reduced to manually scrolling to each song and clicking on the 'cloud' to download, this works sometimes and sometimes it doesn't. The whole thing usually crashes after a while.
This is where I am now, at the iTunes store on the "Purchased" page with all my songs in a list with "downloaded" or a "cloud icon" in the far right column, frozen once again.
I really would like to maintain the original purchased date(the day when I purchased the song from iTunes) but I'm to the point where I'd just be happy to get them downloaded onto the Macbook Pro, and hopefully never deal with the cloud again for the rest of my life.
Lastly, if anyone can recommend an alternative music site to iTunes it would be welcome.
Thank you.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

How do I change the value labels in a line graph without changing the data in the source table?

Similar Messages

Maybe you are looking for