How do I change the volume of audio

Hi there everybody
I'm new here, and here's my first question:
I want to change the audio volume of every clip in the timeline say +3db or +2db, whatever the amount... Is there a quick way to do this? Is thera also a quick way to add same Eq to every clip?
Thank you for your help in advance...
Message was edited by: Polleponi

Welcome to the forum!
There are a few different ways to do that. One is to select all audio clips in the Timeline, then go to Modify->Levels. Enter the amount by which you want to change the levels (+ or -) and hit enter. The default setting is Relative to the present gain level of each clip. For example, if one clip was set at 5db and the next clip was set to -2db and you entered a value of 6db, the new level for the first clip would be 11db and the second clip would be 4db.
You can also set an Absolute value. The value you that you enter will become the gain setting for all clips. Using the above example, setting an Absolute value of 6db, the new gain level for both the first and second clip would be set to 6db.
-DH

Similar Messages

  • How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

    How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

    Every time I move the volume, it moves back!
    Check, if you have a volume automation set on the software instrument track.
    If the track volume automation curve is enabled, the volume slider for the track will move with the automation curve.
    Click the automation curves disclosure triangle in the track header and disable the volume automation.

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

  • HOW do I change the VOLUME of "You've Got Mail?" too loud!!!!!

    '''''# * '''bold text''''''''

    Hi Looking4YourHelp,
    You change the volume by pulling up Control Center and moving the slider bar for volume that is right under the player controls. Take a look at the link below for more information. 
    Use Control Center on your iPhone, iPad, and iPod touch
    https://support.apple.com/en-us/HT202769
    Take it easy,
    -Norm G. 

  • How do I change the volume in the middle of a clip up and down?

    I need to make my questions I ask during the interview quieter in my Final Cut x.
    The man I was interviewing was pretty near to deaf so for him to hear I almost yell the questions.
    I remember that somehow I need to put start and stop makers on the volume to be able to raise and lower just parts of the clip's volume, but I cannot remember how to put those things on a clip or what they are called?
    I did already detach my audio.
    So basically what are the best ways to raise and lower my audio in the clip and how do I find those things that make the points where the change will start and stop and what are they called?

    Just cause I have to finish this, I think I did a really weird way, but would still like to know the correct or best way to do it. I put keyframes right beside the keyframes that I was using so that I could pull down the area between them, so I used 4 keyframes to get one little area to go down.
    so ... Is this the right way to do it?

  • How can you change the volume level????

    Hi all:
    I don't know if this is possible but sometimes I want to reduce or increase the volume level of several clips (10 or 20) by the same amount while they are linne up in the timeline, they are individual clips arranged back to back during the edit.  I want to either up the volume by 10db or down 10db from baseline 0db.
    Do I have to do it induvidually or is ther a way to select them and apply the change to all of them at one time.????
    Your input is appreciated
    Thanks,
    AppleLou

    And to go a step further, put them all into a Compound Clip, and you can apply a single filter to them all at once, plus keyframe your audio over time to them all at once.

  • How do you change the volume for multiple clips in one go?

    Hi all,
    Im having some trouble with audio. Im posting this in a rush so sorry in advance if its a bit muddled! Im editing snow reports with a journo piece to camera (track one lapel microphone) with overlay (track two nat sound ).
    1. is there a way to only bring in track one only and track two only from the source monitor?
    2. Is it possible to adjust the volume on multiple clips that are on the timeline (so that i can bring down the nat sound for all of the overlay track two)
        At the moment im bringing them into the timeline and adjusting them individually. I tried lowering the volume on one clip and saving it as a preset but    it wont let me.
    your help is greatly appreciated
    Paul

    Duplicate the audio once editing is done.  In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other.  Then adjust the mixer appropriately.

  • How do i change the volume so i can here when im recieving texts and phone calls, how do i change the volume so i can here when im recieving texts and phone calls

    how do i fix my volume for when i recieve phone calls or text messages

    There are two buttons on the left side of your phone, one with a "+" etching, and one with a "-" etching. Click those to turn your volume up or down.

  • How do I change the volume if the plus volume button is not working on my ipod nano?

    Now the volume is at zero and I can´t increase it..

    Hm it did work to reset the settings( to just get a normal volume). Anyone else had the same issue?

  • How do you change the volume used for group folders in Lion Server?

    So I'm slowly acclimating to Lion Server, however, I'm not able to determine how to specify the parent folder for Groups.  By default it's the /Groups root directory on the boot volume however I'm trying to change it to an alternate drive on a separate volume.  I've tried removing the sharepoint from the 'Server' admin utility and adding the alternate Group folder (on a separate volume) but to no avail.
    Has anyone else worked with this?

    Hey,
    Open Workgroup Manager app, from the ServerAdminTools, (link) enter your domain name for your server (FQDN), enter your OpenDirectory administrator user and password, go to Groups > Groups Folder.
    Hope this helps.

  • How can i change the setting for audio-video for my face time to built in only so i can have my skype camera ?

    Good evening,
    The last few days my I lost the ability on Skype to be seen by the other party ... I can see them but they cannot see me. At the same time my Face Time sent me some messages error.
    When I open my Skype and go to Preference and go to audio/video I see my image ... and when I go back to make a call the camera is off (no light). When I look at the bottom where I can have a drop  down arrow I have Face Time (built in).
    On my other Macpro  (that work well) I have at the same place  built-in only.
    Cannot change anything on my MacBook air ... no drop in.
    Please Help and thank you !

    There are no settings for video resolution or frame rate.
    Regarding iOS developer policies:
    https://developer.apple.com/devcenter/ios/index.action

  • How to Change the Volume Changing Sound

    How can I change the volume changing sound? I don't want to turn the sound off but I dislike the sound it makes when the volume changes currently.

    Eireannsg1 wrote:
    Yea, that reason sounds silly.
    There are always 1001 reasons why it isnt being done because someone just doesnt WANT to do it.
    It only sounds silly to you because you don't really understand the reasoning - obviously. Back in the days of CEP, this software did have a direct link to whatever mixer was being used - almost invariably the internal Windows one. And it was removed. A lot of sound devices simply don't provide links into their mixer panels any more - you run them standalone. On top of that, sound devices these days don't always use the same driver system, and also a lot of devices access Audition by external linking software, like ASIO4ALL. All of these things combined make it not as simple as you seem to think to implement something like this.
    So it's not a case of no-one wanting to do it - it was actively removed, because strictly speaking it's not something that Audition should be legitimately addressing. Audition is an editor, and multitrack system, not a machinery controller. That's why its internal mixer is a purely virtual device, and has no direct influence on any of the hardware, except to determine the available inputs or outputs that it addresses.
    So typically with the devices I use, if I want to control the physical attributes of them I leave their control panels open, almost invariably on a second monitor. And that is entirely sufficient.

  • Change the volume image flags values

    Hi
    I am using Windows 8.1 Update and Windows ADK.
    Without using the ImageX command, how do I change the volume image flags values displayed with the Dism /Get-ImageInfo /ImageFile:"<WIM_File_Path>\<WIM_Name.wim" /Index:<Image_Index> command?
    Where are these values ​​stored?
    Thanks
    Bye
    Balubeto

    Hello,
    If you want change the value, you can use the command line (imagex) or one tools (Gimagex)
    https://www.autoitscript.com/site/autoit-tools/gimagex/

  • How do i change  ringtone volume to ring with low volume first and then gradually increase to the max volume ?

    how do i change  ringtone volume to ring with low volume first and then gradually increase to the max volume ? this feature was available before but is  still available now ? this is for IOS8 running on Iphone 5c.

    I've never been aware of a function like this in the past. You could create a personal ringtone that would last 30 seconds or less and set the volume on that ringtone to do that with an audio editor, such as Audacity.

  • Changing the volume of main menu audio

    I was also wondering if there is a way to change the volume of the audio I placed in the background of my main menu page in PE4. Once I originally created the menu (from a template), I can no longer access/modify the song I placed in it. Thanks again.

    1.  Wen you say I shoudl locate my Menu Audio file, do you mean by serching the folders? I cannot find its location within my PE file when it's open. In the same way, I do not know how to actually change the file to another one from within the program. Perhaps I can only view it by searching for it on My Computer.
    When you added the link to the Menu for Audio, how did you locate the file then? That would be the same place to look now.
    Personally, I would Open that file into Audacity, or other Audio editor, make the changes there, and then Save_As, maybe sticking "menu" in its name, so you'll know that it is a different file. Back in PE, I would un-Link the Audio from the Menu, and then just re-Link to the one with the attenuated Volume. Also, you will want the Duration of this Audio file to be no more than 30 sec. (I think that is the Duration for both Menu Audio and Motion Video in PE).
    How can I make the menu audio fade in and out. I assume I can't do that in PE (as I can with all other background music in my project that I see in the timeline). Do you suggest Audacity for this as well even before I import it into the project's menu?
    This can be easily done in Audacity. It might even have a Preset for doing a Fade-in/Fade-out. I usually use Adobe Audition, or actually PrPro (PE's big-brother), as I often do DD 5.1 SS for the Menus, as well as Videos. In PrPro, I just create a new Sequence, something that PE does not have, edit the Audio only, as needed, and then Export as a DD 5.1 SS AC3 w/ the SurCode DD plug-in encoder. Though Adobe Encore, the authoring program that I use, has no limit on the Duration of Menu Audio (or Motion Menu Video), I still keep it to only about 30-40 secs, as I assume that the user will make a selection by that time. Also, with the repetitious nature of the music that I choose, and their Fade-in/Fade-out, if the Menu is up longer, it is not noticable that it has repeated.
    I use music from a company, SmartSound, and a plug-in that works with PE and PrPro, to "create" custom music from their pieces. I've marked about 12 pieces that have the characteristics that I want, and will use one of the SmartSound variations on these. I also use a bunch of their music for my Soundtracks. Though it's not a plug-in, their SonicFire Pro 5 is amazing with what it can do with their Strata Multi-layer Series of Music.
    It seems that their free plug-in comes with PE7, as well as a few pieces from their library. If you do not have PE7, the plug-in is free and works with about any flavor of PE, or PrPro. The music is not free, but over the years I've built up a significant library, whenever they have a sale.
    Good luck,
    Hunt

Maybe you are looking for

  • Trying to understand the Release Process with Milestones

    Here's my goal: I want to control the release of a project so that only certain WBSs can accumulate costs once certain milestones are reached. I want to block people from confirming activities out of order. I created a project with the following acti

  • Adding a link to a web page

    Hi, I'm trying to add a link to a web page to my project, but the url appears as regular text in the project and in the preview. I've tried to search the cp help, the forum and the knowledge base for a way to do it, and didn't find anything. Is it po

  • Unusual Issue with Dial-peers

    To Start it off, I am running CUCM 8.6.2  The head router is a 2951.  All my branch locations are 2901s running 15.2 with an FXO and FXS card.   On all the 2901s I have dial peers set as follows voice-port 0/1/0 trunk-group SRST-OUT timing hookflash-

  • Using WRT45G wireless router with a pre-existing network?

    I am an NYU student, so I am already connected to a pre-existing network. However, I would like to have wireless internet in my room, so I bought the WRT45G router. Is it possible to do this? I don't have an actual, physical modem. There is just an i

  • Gutterball Bowling Game Keeps Prompting For Update Every Week

    Hey Adobe, I am running Firefox 16 with Adobe Shockwave Player, the latest version.  About every 7 days, I get a prompt to update Shockwave Player when I play Gutterball 3D at this site: http://www.shockwave.com/contentPlay/shockwave.jsp?id=gutterbal