How do i change to a WEP key?

I have no idea how to change to a WEP key so i can play my nintendo DS

Welcome to the Cisco Home Community.
You can refer to this document on how to setup your routers Security.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Similar Messages

How do i change the Std. confirm key from 'AB' to 'Z1', receiving ACK IDOC.

Hi,
How do i change the Std. confirm key from 'AB' to 'Z1', when loading ACK IDOC.
Thanks

Hi Jorge,
Thanks for your help.
I change the output mode to "Collect IDocs" method, if I use SAP standard function POIM (RCCLMDAT), it will depend on change pointer to generate IDoc, and it includes function: RSEOUT00 ( and MASS_RSEOUT00 ) to collect and send IDoc.
The collect table is BDCP.
BR,

How can I input the required wep key to enable wifi

Trying to connect to my wifi network with my iPad, however the network needs a WEP key. iPad doesn't seem to be able to input this key, although I have it.
Any ideas..?

The password should be printed on the router's label.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Changing the default WEP Key

I have been connecting to a wireless network for months but then I changed my router and the WEP key. My laptop is still trying to connect with the old key, even though the new password is stored in key chain. How do I made my laptop automatically use the new key.
I DON'T NEED HELP MAKING A KEY. I NEED HELP MAKING MY LAPTOP USE THE NEW KEY.
My work around for now is opening network preferences and clicking Assist Me > Diagnose and then entering the WEP key there. But this takes forever and shouldn't have to be done. Thanks for the help!

Oh, okay about no issue with WEP keys then. You might want to consider turning airport off temporarily, then do what nerowolfe suggested, then go to sys prefs network and select the airport interface and click on advanced, then on the airport tab, delete the network altogether. For good measure, you could reboot to come up in a known state (?), turn airport back on, and manually re-add it as a wireless network just as you would do if you had roamed into a new wireless service area. At least that's what I'd try to do.

How can i change the colour of key words in long text fast ?

Hi,
I have long text (for example script) which should be displayed in TextArea (or something similar) with colored keywords.
I tried with TextRange
new TextRange (myTextArea, true, start_Index, stop_index)
and with
RichEditableText
var highlightFormat:TextLayoutFormat = new TextLayoutFormat();
highlightFormat.color = 0xFF0000;
for each (var currentKeyword:String in keyWords) {
myRichEditableText.setFormatOfRange(highlightFormat, indexOfKeyword, indexOfKeyword + currentKeyword.length);
Either ways are too slow, 30 sec....
The indexes of words which should be colored are computed below a second but creating an object for every keyword is too expensive .
Any Idea what should i do ?

There are a couple of things you can do. Check out the PS Touch tutorial, "Replace colors," as one example.
You can optionally use the other selection tools in lieu of the Magic Wand selection tool.
Also, you can use the Paint Tool's effects options in conjunction with any of the selection tools. Many common effects and adjustments (like "Color Balance" in the PS Touch tutorial) are available by tapping the Mode option and choosing, "Effect," rather than, "Paint."

How do i find WEP key for wrt54g

Hi, my husband set up our system and i am trying to add a new wireless printer. He is out of the country for business, hence my problem. How do i find what the WEP key/ network key is? Thank you for your help.

If you have other computer which had connected to this wireless network before, probably you can also use this wireless key finder on that computer to locate the WEP encryption key.
Hope this helps.

WVC54GCA setup won't take WEP key

Hi - I'm setting up this Linksys WVC54GCA Wireless-G Monitoring Camera and can't get it to take my WEP settings.The setup screen says, after you select 128 bit WEP, to leave the passphrase field empty and enter the WEP key on the next screen. When you hit enter you get an error saying that the WEP key should be 26 digits and and you cannot continue!
If I turn WEP off and do it without security it all works fine, so how am I supposed toenter the WEP key? Seem like a bug. Endless loop!
hanks
Mike

Hey just had the same problem as you and found the way around it. It looks like the Wizard has a bug in it that you have to use the Pass phrase not the pass key.
The way around it is to use the web interface, use the IP address that has been assigned to the camera as the web address in your browser, you can see this in the wizard or on your wireless router.
all the settings to manage the wifi can be found there, you need to use that area to manage everything else for the camera anyway.
You may need to reset the camera, there is a little button under the camera, use a pen and hold it in for a slow count of 10.

How can I change pre. Ele. 3.0 registration with new CD

I lost my original premiere elements CD. I purchased a new CD thru ebay. When I try to install the software it says the registration is invalid and reinstall Pre. Ele. 3.0. How do I change the registration(product key no.) in my computer so that I can install Pre. Ele. 3.0 again to access my old photos and vedios. If there is way to go into regedit and change the key I will do that. But I do not know whre the product key for Pre. Ele. 3.0 was kept in the system. If somebody knows the way to solve the problem please help me, So that I do not have to buy the software thirdtime from Adobe or Panasonic. The software bundle came with my Panasonic vedio camere which I bought in Feb. 2009. I went to the seller and asked for resolution and he said I have to buy the software again.

This is something that you will need to contact Adobe Customer Support (Contact at top of the main forum page) to do. If you registered your copy of PrE, you should also be able to get the S/N through your Adobe I.D., though it sounds like you have your S/N, but it's just not working. Is that correct? Though it's too late now, you might want to see this THREAD from the Adobe Photoshop Forum on purchasing Adobe products from eBay.
Good luck,
Hunt

N8 How to change WEP key

I have typed in a wrong WEP key for a WLAN network
So when I try to use that WLAN Network, it will show connected but I cannot surf at all.
How can I change the WEP key ?
Solved!
Go to Solution.

Settings>Connectivity>Settings>Destinations>Internet>YOUR CONNECTION>WLAN Security settings>WEP key settings>WEP Key
Easy?!

How to implement WEP key change ?

Hi everyone,
Once a week, I go and teach English in a pensioners association here in France.
I have recently been advised that their WEP key had been changed.
I expected a prompt requesting the new key but it did not happen. It simply does not work.
How can I re-connect using the new key ?
I use a MacBook with Yosemite 10.10.2
Thanks for your help
Christian

To support dynamic wep you will need to setup a RADIUS server for authentication. You would then configure PEAP or EAP-TLS for athentication. IAS (Server 2000, 2003) or NPS (Server 2008) is free, but if you are going to dynamic WEP why not go with WPA.

My new smart TV recognizes my network, & asks, "Please enter you WEP keys (10 or 26 hex digits)" but my netwotk uses a password of 6 characters. How can I get my smart TV to connect to my network?

I have a current iMac with the latest OS update.
My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits). My Airport Express, an early model, only requires a password of less than 10 characters.
When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.” That’s what got me here.
My earlier MacBook runs OS 10.6.8. Its version of Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
I’m afraid of changing those settings for fear that I’l mess up the whole thing.
How can I get my smart TV to connect to my network, ?

Please check out the following AirPort User Tip on how to recover AirPort passwords.

How do I change my wep

help me!!
I have an old wireless router befw11s4 version4
I replaced this one with an 802.11G router.
Problem is that I decide ti use the old one at a different location and when I went to get online on the secured network that I created, I do not remember my wep??
I have searched this site for help but I have not found out how to change it /unsecure it/whatever has to be done to get online

Hardwire a PC directly to the BEFW11S4 and open up internet explorer and type on the address bar the numbers 192.168.1.1 (username just leave it blank, password as a default is admin)...
It could either be 2 things...
If the page's main outer background is BLACK:
- near the lower part of the screen, look for WEP key settings, click on it and copy down whatever is written down on key 1, that is your WEP key
If the page's main outer background is WHITE
- go to the wireless tab
- go to wireless security
- copy down key 1, that is again your WEP key.....

Help? Can I change my WEP key on my router?

Hi All...
I'm a newbie to these forums and I have a question... Can I change my WEP key on my FiOS wireless router? (Actiontec MI424-WR Rev. D)
My neighbor, who also watches our dog when we go on holiday, has been using my internet from his house. He freely admitted this. My FiOS is much faster than his throttled Comcast and since he's a power user (torrents) he frequently uses my internet connection for all his massive downloads. His usage knocks me off PS3 and noticeably slows my internet speeds down.
I know he has my IP and WEP since he spends weeks at a time in my house. I'd like to change my WEP key and keep it hidden from him.
How can I kick him off and prevent him from hopping back on?
Thanks in advance.
Emma
Solved!
Go to Solution.

Well... theft of services issues aside since what your neighbor is doing is illegal ...
I agree with Justin. Go with a WPA2 connection and use a reasonably long and complex password. I'd change the SSID as well although that's not absolutely required. Also make sure you change the userid/password on the router as well in case they know it. Don't get wrapped up in hiding the SSID or turning on Mac authentication -- while they don't necessarily hurt, they don't add anything appreciable to the equation and just make your own life more difficult.
Now ... I'm going ask, are you even using the the wireless at all? Perhaps you are using a hardwired PC to the router and really don't need the wireless? If so, just go into the router and turn the wireless off. Your neighbor can't steal what isn't there.
Oh ... and it might be time to get the key back and find a new dog sitter.

How to set up wireless WEP keys in GPO? - possible?

Summary:
How to switch users from using Intel ProSet to manage their legacy SSID w/ WEP to using Windows Zero Config w/ both legacy & new SSID's automatically?
Detail:
Some of our sites are still using WEP for wireless encryption (believe it or not) over 802.11b AP's.
We're in process of upgrading encryption from WEP to WPA2 & from 802.11b to 802.11a/g AP's.
One immediate challenge we have is how to keep both networks in parallel and make this transparent to the end users.
We can't cut all floors over at once, but need to do one floor at a time because users move from floor to floor.
We were able to roll out the new network / SSID in Windows Zero Config through GPO, but learned that we can't do the same for the legacy SSID - setting WEP keys isn't an option in GPO, at least according to the server admins.
Does any of you know how we can do this in an automatic & transparent fashion?
So far we've been using sneaker net to switch users from Intel to Windows, & configure WEP keys in Windows, which is taking up way too much time.

If you use a GPO to manage the wireless it will disable the intel proset software. This can have a negative impact, as you may have user that like to use the Proset when not in the office.
If you are going to use GPOs then the transition should be pretty smooth, just setup the new secure SSID first and then roll out the GPO. There are several M$ patches that you should install as well. Do a search for Microsoft Wireless hotfix and rollup and you will find them.

My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help :(

My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help

- If the "other" account has administrative privileges then just try changing the PW for your account.
- Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode
Reset mac mini admin password: Apple Support Communities
- If the problem is due to a bad KB just get a new KB

How do i change to a WEP key?

Similar Messages

Maybe you are looking for