How do i check who imported transport in SAP System

Can some one please tell me the table name where i can find who has imported the transport in SAP System

E070 table only shows the day the transport was imported it does not record the user who imported the transport. I was able to check TPLOG table and I found some transports getting recorded but not all of them. I am not sure what logic it uses to record the information.
I am not sure where else I need to look to get the person who imported the transport. Please any other suggestions

Similar Messages

  • How do I find who imported a transport request

    Hello
    How do I find who imported a transport request

    Hello,
    1) Go to transport history or SE09 --> F5 in target system and find out what time your change imported to target system.
    2) now you need to find who did this and you can go to STMS_IMPORT on target system and look for transport monitor SLOG and match with timings. (you will find slog info at the same place at import monitor)
    There was one time I have experienced mass import was done by a learner and I could able to go back and find the info by matching with SLOG, STMS_HISTORY, STAD.
    Thanks,
    Vasanth

  • How could I see who imported a transport request

    How could I see who imported a transport request (not who is the owner)
    In import monitor I can see it but only for current day(or I can extend that period)

    goto SE01 ..
    enter the transport request ...display
    In
    Object List of Request
        Comment Entry: Released
            EC6XXXXXX 20080325 190541 USER <-- person responsible
    You'll have the person who released(USER)

  • How we can monitor while import request in production system?

    dear friends,
    will you please explain me
    how we can monitor while import request in production system?
    and
    what are the things we have to monitor during the transport?
    thanks
    regards
    zaheer

    Hello Zaheer ,
    I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
    Check with
    tp -v
    R3trans -v
    if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
    During the import, it is important to check the contents of the directories
    usr/sap/trans/tmp
    and
    usr/sap/trans/log
    that they are being continously updated which shows import is progressing.
    Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
    If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
    If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
    When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
    Best regards,
    Paul

  • Import RFC from SAP System to XI

    Hi
    It is taking more time ( 5 to 10 mins) to list the RFC from SAPsystem ,When i try to Import RFC from SAP System to XI.
    Please let me know your ideas on the same
    Regards
    Madhan D

    Hi,
    Could you pls check the following sap notes..
    SAP Notes  718320,767091 and 212011 for a better idea on difference in performance while extracting data from R/3 backend.
    Regards,
    Madhu

  • Parallel How many times user can login to the SAP system through ITS

    Hello all
    We are using the ITS ---620 and following 46D R/3 system 
    R/3 system details:
    Kernal :
    kernel release :46D
    O/S :SunOS 5.8 Generic_108528-05 sun4us
    We would like to now, At a time How many times user can login to the SAP system through ITS
    Kindly letus know  if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
    Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
    We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
    System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
    I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
    Thanks

    I have searched all docs and notes.
    Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
    The functionality does not exist for SAP Gui for HTML.
    Regards,

  • How to find out who imported last support packs

    Hello
    I wander who imported last support packs on the system ILS (SAPKB70014 and SAPKA70014). How to find that out. The transport directory is common for many systems

    One possibility is to check the SLOG*. They can be found in TRANSDIR/log. There will be an SLOGYYWW.SID, where YY is the year (example 09) and WW is the week number (example week 10 of the year). Check the date and time, when the package was imported and then look it up in the SLOG. You will get lines like these:
    START imp all              SID        20090204132535              USER     myhost 20090204132535
    And USER is the one you are looking for...
    Best regards, Michael

  • How can I check who changed a room number for an Asset?

    Hi people!
          I'm working as BASIS and in december we make a restore from production to another environment to make some test.. a user tell me that in transaction AS03 for an specific Asset number and company code the number of the room are diferent. For example he tell me that if he go to production and check the same asset for the same company code that he check in the test environment the room are diferents.. I think that maybe someone change it because 'is a restore'... I think that is imposible that this is caused by the restore.
    Someone knows how can I check in some transaction or table who change this room number?
    Thanks a lot for your help!!

    As stated by Eli, only where there is approval process involving workflow for any changes to the master, then it will be stored temporarily, till the approval process completes.
    If there is no approval process in the system (no workflow), them it immediate updates the database.
    Regards,
    Ravi

  • How to check the Idocs sent from SAP system

    How to check the outbound Idocs sent from SAP system to target systems.
    How to know the message types and target systems.

    Hi,
    In Addition with the above mentioned transaction code(WE02), u can check out idocs in these table - EDIDC, EDID4, EDIDS.  Depending on different status you can differentiate them as Inbound or Outbound Idocs...
    Cheers...
    Santosh.
    <i><b>Mark All Usefull Answers...</b></i>

  • How can I check the notes installed in the system?

    Hi Experts!
    I need to check if the note 749967 are installed in the system. How can I check that? I have this support pakage: (SAPKH50011) .
    If I don't find it in the snote transaction that means that the note are not installed? Or not exactly?
    Thanks for the help!

    Hi Carlos,
    You can check implemented notes inside transaction SNOTE in the menu:
    Go to->SAP Note Browser
    or run transaction:
    SCWN_NOTE_BROWSER
    Regards,
    Wojciech

  • How to determine the size of client in sap system

    Dear Exports,
                         Pls suggest me how we can check the size of the client in oue sap system.
    Thanks in advance.

    Hi Amit,
    If you are not able to check the note 118823 or you can't able to find the solution. Just start client copy in test mode, there you can get the size of the client then you can cancel the client copy(which is in test mode).
    Hope it will resolve your doubt.
    Thanks
    Kishore

  • Import file to SAP system switch to SAP XI scenario

    Hi,
    we have scenario: download data from 3rd party system to the file and later on import this file to the SAP EPR system.
    What possiblity we have when we want to use SAP XI? Only create new RFC functions to be able upload files? Or it is possible to re-use currect program for upload file?
    And reverse scenario? We download data to file from SAP ERP and later on import to 3rd party system. It is possible to re-use program used for download data?
    Thanks a lot for ideas.
    Regards,
    Roman

    Hi,
    Downloading data from the third party system to File system will be out of XI Job.that ur other team has to take care.
    Coming to Xi
    From the file system to SAP R/3 we can do using XI
    File---XI-SAP R/3( Use IDOC/ RFC/ PRoxy)
    In the other way also
    SAP R/3( IDOC / RFC/ Proxy)--XI--File
    Check this to choose the right adapter when dealing with the SAP R/3 Application
    /people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
    Regards
    Seshagiri

  • How to delete the list of employee on SAP system?

    Dear all,
    I want to delete the list of employee on my SAp system but I don't know how to do this, What's the transaction code that use to delete mutil employee on SAp system?
    Please help me to do this.
    Thanks and Best Regards,
    Huyen Nguyen

    PU00 is the tocde for Single PERNR
    and check RPUDELPN  report for mass deletion of PERNR
    but dont do in production system
    Edited by: Sikindar on Aug 14, 2009 8:18 AM

  • How to call WDA Application from an other SAP System

    hello all,
    I have a WDA Application and if the user click on a Button in this Application,  i need to call an other WDA Application from an other SAP System.
    example:  SYStem  X01 has a WDA Application and there is a Button in this Application, if the User click on this Button, a WDA Application from an Other System X09 shoud be displayed in the same window, same WDA IFRAME .
    can any one tell me how can I do this?
    Thank you all

    Hi,
    As mentioned earlier, you need to pass the host name and port of the second system. If the application name is same, pass the same application name.
    DATA: lv_url TYPE string,
           lv_host TYPE string,
            lv_port TYPE string,
            lv_protocol TYPE string.
      CALL METHOD cl_wd_utilities=>construct_wd_url
        EXPORTING
          application_name = 'ZWD_APPL_NAME'
          in_host          = lv_host   " host name of second system (X09)
          in_port          = lv_port    " port of second system
          in_protocol      = lv_protocol  " protocol of second system
    *      in_parameters    = lt_parameters
          namespace        = 'sap'
        IMPORTING
          out_absolute_url = lv_url.
    To get the Host, Port and Protocol of second system, wrap the below code in a Function Module(RFC) in X09 and call this in X01 and then pass them to the cl_wd_utilities=>construct_wd_url as mentioned above
    CALL METHOD cl_http_server=>if_http_server~get_location
        IMPORTING
          host         = host
          port         = port
          out_protocol = out_protocol.
    hope this helps,
    Regards,
    Kiran

  • How to extract data from ODS to non-SAP system

    Hi,
    Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
    Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
    The non-SAP system is an unix system.
    Thanks in advance
    Ella

    Ella,
    You can look at it from the concept of a BADI / Infospoke
    Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
    Hope this helps...
    Arun
    Assign points if it helps

Maybe you are looking for