How do i choke samples in esx 24

choking samples comes from the mpc when you can one shot a sample and as soon as you hit another sample, the previous sample will stop playing

You have to go into the EXS editor.  (Can't find? first enable all advanced prefs)  Assign the two samples to a group, go into the group button (top left... not the group menu), change the "Poly." parameter to 1.

Similar Messages

  • How do you edit samples in esx 24?

    Hello,
    I am trying to edit my saples in ESX 24 by clicking on the triangle next to the audio files name and choosing "open in sample editor." I edit the audio file, close sample editor wanted thew sample to reflect the edit but it does not.
    Thank you.

    Hi Jan Due1,
    I split 1 audio file into 10 different regions on the arrange page. I select them all~right click~choose convert to new sampler track and logic creats a new ESX instrument and imports each region as a seperate sample. I want to open up each sample in the sampler editor and edit the region that the saple will play back but when I close the sample editor it goes back to its orrigional position.

  • Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word.

    Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word. Sample Editor playback sounds like Alvin on a meth binge. Spoken phrase is generated from Textspeech. Textspeech can export files as WAV files or MP3 files. Perhaps a clue?:   When exported Textspeech WAV file is dragged and dropped into track in arrange area of new project, it exhibits same supersonic speed. When Textspeech file is exported as MP3 file and dragged and dropped in arrange area track, it plays at correct speed.

    Thanks Erik,
    If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
    As an aside....
    I recall how all the 'naysayers' prior to LPX (and in some cases, since...)  were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now?

  • How to install the Sample Apps in Hyperion Financial Management 11.1.2.2?

    Hi,
    Could please anybody tell me how to install the Sample Applications in Hyperion Financial Management 11.1.2.2?
    The following is written in the Administration guide:
    If you did not install the sample files, you can obtain them by reinstalling Financial Management
    and selecting the Sample Applications component.
    I cannot find the “Sample Applications component” among components during installation process.
    There are only “Financial Management ADM driver”, “Financial Management Web Application” and “Financial Management: services”.
    Hope this helps,
    Thank you,
    Vadim

    After you install the sample application, all of the application extracts can be found under the below location.
    Oracle_Home\Middleware\EPMSystem11R1\products\FinancialManagement\Sample Apps and Starter Kits\Sample Apps

  • How to manage physical sample in SAP?

    Hi,
    How to manage physical sample in SAP?
    Regards
    Ashish Jain

    Hi
    Physical sample is to keep the sample of a product till its shelf life expiry date. E.g. In case of any shelf life applicable product, the inspected sample will be retained till its expiry date. If any customer complaints are received, on inspecting the complaint, result may be compared with the existing physical sample.
    In SAP, Material master should have inspection type 15.
    To create physical sample, sample drawing procedure has to be created and attached to the header of inspection plan. With this set up when the lot is created, physical sample will also be created. Result recording should be done for physical sample. Physical sample storage information has to be updated through transaction code QPR2
    Regards
    Nikhilesh Ray

  • How to run a sample Jolt client

    Can any one explain me how to run a sample jolt client.
    Iam trying to run the following jolt client code ToUpper.java at the command prompt but I am getting the following error.I am getting the same error when i run the Jrepository Applet RE.html.
    D:\ToUpper>javac ToUpper.java
    D:\ToUpper>java ToUpper
    bea.jolt.SessionException: Cannot connect to any //localhost:3050.
    Reason:NwHdlr: Network Error: chkauth: J_CHECKAUTH FAILED
    at bea.jolt.JoltSessionAttributes.getDomainInfoJoltSessionAttributes.java:584)
    at bea.jolt.JoltSessionAttributes.checkAuthenticationLevel(JoltSessionAttributes.java:507)
    at ToUpper.main(ToUpper.java:20).
    I have the tlistener running and provided apppassword and userpassword as my System login password where I have the complete Tuxedo Installation(server and client). Please see the attached sample jolt client program I am trying to run. I am not sure what configuration Settings I need to do.
    ToUpper.java
    /* Copyright 1996 BEA Systems, Inc. All Rights Reserved */
    import bea.jolt.*;
    public class ToUpper
    public static void main (String[] args)
    JoltSession session;
    JoltSessionAttributes sattr;
    JoltRemoteService toupper;
    JoltTransaction trans;
    String userName=null;
    String userPassword=null;
    String appPassword=null;
    String userRole="myapp";
    String outstr;
              try{
    sattr = new JoltSessionAttributes();
    sattr.setString(sattr.APPADDRESS, "//GVC3ZA03TESTING:3050");
    switch (sattr.checkAuthenticationLevel())
    case JoltSessionAttributes.NOAUTH:
    break;
    case JoltSessionAttributes.APPASSWORD:
    appPassword = "123456"//"appPassword";
    break;
    case JoltSessionAttributes.USRPASSWORD:
    userName = "myname";
    userPassword = "123456";
    appPassword = "123456";
    break;
    sattr.setInt(sattr.IDLETIMEOUT, 300);
    session = new JoltSession(sattr, userName, userRole,
    userPassword, appPassword);
    toupper = new JoltRemoteService ("TOUPPER", session);
    toupper.setString("STRING", "hello world");
    toupper.call(null);
    outstr = toupper.getStringDef("STRING", null);
    if (outstr != null)
    System.out.println(outstr);
    session.endSession();
    System.exit(0);
              }catch(Exception e){
              e.printStackTrace();
    } // end main
    } // end ToUpper

    Hi Todd,
    I am not getting the jcheckauthentication error now as i changed the port no. to the port where JSL is running.Now I am getting this error.Also find the ULOG contents pasted below.
    D:\bea\tuxedo9.1\samples\jolt\ToUpper>java ToUpper
    Authentication Level set To :0
    Exception caught error no is:6
    bea.jolt.ServiceException: TPENOENT - no entry found
    at bea.jolt.JoltRemoteService.decodeCALL(JoltRemoteService.java:460)
    at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:345)
    at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:267)
    at ToUpper.main(ToUpper.java:39)
    I have checked the jrepository file and also the Applet window for the service defination(TOUPPER)but still its not recognizing the service.Is there some configuration thing I have missed out before running JOLT client.
    ULOG File Contents
    132947.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
    132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
    132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1197: INFO: Exiting system
    132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
    132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
    132956.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
    132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1197: "INFO: Exiting system"
    132956.GVC3ZA03TESTING!DMADM.5844.5348.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
    132959.GVC3ZA03TESTING!BBL.3216.4372.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
    133028.GVC3ZA03TESTING!BBL.6140.5124.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
    133028.GVC3ZA03TESTING!BBL.6140.5124.0: LIBTUX_CAT:262: INFO: Standard main starting
    133028.GVC3ZA03TESTING!DMADM.4928.1868.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133028.GVC3ZA03TESTING!DMADM.4928.1868.0: LIBTUX_CAT:262: INFO: Standard main starting
    133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
    133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
    133028.GVC3ZA03TESTING!JSL.5608.6088.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133028.GVC3ZA03TESTING!JSL.5608.6088.0: LIBTUX_CAT:262: INFO: Standard main starting
    133028.GVC3ZA03TESTING!JSL.5608.6088.0: INFO: JOLT Listener version-BEA Jolt 9.1
    133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
    133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
    133029.GVC3ZA03TESTING!JSH.6028.5748.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133029.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
    133029.GVC3ZA03TESTING!JSH.6028.5748.-2: INFO: JOLT Handler version-BEA Jolt 9.1
    133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: LIBTUX_CAT:262: INFO: Standard main starting
    133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Current version: BEA Jolt 9.1
    133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
    133029.GVC3ZA03TESTING!WSL.3292.4892.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133029.GVC3ZA03TESTING!WSL.3292.4892.0: LIBTUX_CAT:262: INFO: Standard main starting
    133029.GVC3ZA03TESTING!WSH.2568.3772.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133029.GVC3ZA03TESTING!WSH.2568.3772.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    133029.GVC3ZA03TESTING!WSH.5764.3836.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    133029.GVC3ZA03TESTING!WSH.5764.3836.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    133242.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
    133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
    133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
    133359.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
    133456.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid32(ACCOUNT_ID) failed for INQUIRY: LIBFML_CAT:8: ERROR: Unknown field name. Maybe FIELDTBLS32 is not set properly.
    133612.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
    143325.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid(SAMOUNT) failed for DEPOSIT: LIBFML_CAT:11: ERROR: Cannot find or open field table. Maybe FIELDTBLS is not set properly.
    144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
    144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1197: INFO: Exiting system
    144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
    144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
    144116.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
    144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1197: "INFO: Exiting system"
    144116.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
    144119.GVC3ZA03TESTING!BBL.6140.5124.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
    144148.GVC3ZA03TESTING!BBL.4144.4376.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
    144148.GVC3ZA03TESTING!BBL.4144.4376.0: LIBTUX_CAT:262: INFO: Standard main starting
    144148.GVC3ZA03TESTING!DMADM.4436.5968.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144148.GVC3ZA03TESTING!DMADM.4436.5968.0: LIBTUX_CAT:262: INFO: Standard main starting
    144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
    144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
    144148.GVC3ZA03TESTING!JSL.5072.2444.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144148.GVC3ZA03TESTING!JSL.5072.2444.0: LIBTUX_CAT:262: INFO: Standard main starting
    144148.GVC3ZA03TESTING!JSL.5072.2444.0: INFO: JOLT Listener version-BEA Jolt 9.1
    144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
    144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
    144148.GVC3ZA03TESTING!JSH.5856.5268.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144148.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
    144148.GVC3ZA03TESTING!JSH.5856.5268.-2: INFO: JOLT Handler version-BEA Jolt 9.1
    144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: LIBTUX_CAT:262: INFO: Standard main starting
    144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Current version: BEA Jolt 9.1
    144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
    144148.GVC3ZA03TESTING!WSL.3040.5488.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144148.GVC3ZA03TESTING!WSL.3040.5488.0: LIBTUX_CAT:262: INFO: Standard main starting
    144148.GVC3ZA03TESTING!WSH.5740.2764.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144148.GVC3ZA03TESTING!WSH.5740.2764.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    144148.GVC3ZA03TESTING!WSH.1784.5448.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144148.GVC3ZA03TESTING!WSH.1784.5448.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    144157.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
    144207.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
    144226.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
    144229.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
    144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
    144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1197: INFO: Exiting system
    144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
    144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
    144518.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
    144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1197: "INFO: Exiting system"
    144519.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
    144522.GVC3ZA03TESTING!BBL.4144.4376.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
    144543.GVC3ZA03TESTING!BBL.5440.4548.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
    144543.GVC3ZA03TESTING!BBL.5440.4548.0: LIBTUX_CAT:262: INFO: Standard main starting
    144543.GVC3ZA03TESTING!DMADM.1016.6128.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144543.GVC3ZA03TESTING!DMADM.1016.6128.0: LIBTUX_CAT:262: INFO: Standard main starting
    144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
    144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
    144543.GVC3ZA03TESTING!JSL.1796.5232.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144543.GVC3ZA03TESTING!JSL.1796.5232.0: LIBTUX_CAT:262: INFO: Standard main starting
    144543.GVC3ZA03TESTING!JSL.1796.5232.0: INFO: JOLT Listener version-BEA Jolt 9.1
    144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
    144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
    144543.GVC3ZA03TESTING!JSH.3164.4076.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144543.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
    144543.GVC3ZA03TESTING!JSH.3164.4076.-2: INFO: JOLT Handler version-BEA Jolt 9.1
    144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: LIBTUX_CAT:262: INFO: Standard main starting
    144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Current version: BEA Jolt 9.1
    144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
    144543.GVC3ZA03TESTING!WSL.2596.4404.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144543.GVC3ZA03TESTING!WSL.2596.4404.0: LIBTUX_CAT:262: INFO: Standard main starting
    144543.GVC3ZA03TESTING!WSH.3508.5136.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144543.GVC3ZA03TESTING!WSH.3508.5136.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    144543.GVC3ZA03TESTING!WSH.4288.5676.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
    144543.GVC3ZA03TESTING!WSH.4288.5676.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
    144548.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
    144634.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
    144734.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"

  • How could I generate sample schema's after 11g r2 installation

    Hi,
    I appreciate if anybody let me know that how could I generate sample schema's after database installation (11g r2).
    Regards,

    hello
    you can download the script in the this link
    http://www.oracle.com/technology/obe/obe1013jdev/common/files/sample_schema_scripts.zip
    or
    sqlplus /nolog
    conn / as sysdba
    @mksample.sql
    regards
    zekeriya

  • How can download Code Samples?

    how can download Code Samples? thanks

    Hi,
    u r asking about SDN Code samples download? then
      click on the downloads like and got to code sample - > webas
    https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fWCM!2fcom.sap.sdn..wcm.search.search_adv_0%3FSearchVisible=false%26SelectedCustomProps=sdn_product(value=Web Application Server),resourcetype(value= sdn_code_sample)%26SearchPluginName=sdn_library
    Regards
    Kiran Sure

  • How the downconversion and sampling

    Dear Sir/Madam,
    I am working on the NI card Pxi-5660 (NI Pxi-5600 & NI Pxi-5620) and I
    would need to understand better how the downconversion and sampling
    works:
    1) When we configure the card, we set the carrier frequency fc and
    bandwidth B to control downconversion. I understand that the band that
    we consider is between fc-B/2 and fc+B/2. How is this band
    downconverted? (i.e. how do you choose the frequency of local
    oscillator? Is it fc-B/2?)
    2) Concerning the digitizer. How is the sampling frequency chosen as a
    function of fc and B? Does it work at a fixed sampling frequency of
    64Ms/s or do you change the sampling frequency as a function of B?
    I would appreciate if you can help me on these issues. Thank you very
    much in advance.
    Best regards,

    Hi Babu,
    Campaign Type controles the Objective and Tactics in Marketing Planner.
    Based on Type we define Objectives and Tactics in Marketing Planner/Campaign.
    Thanks,
    Srini.

  • How do u load samples in to samplers/drum machines

    hi iv been using logik a short while and have simply been draggin and dropping my samples (kick.hi's , snares etc) staight in to the arrangment, but i was wondering how i get my samples to route through the samplers and drum machines so i can alter them etc ,,,
    thankx in advance
    kirk

    You certainly can, & in the long run it will be much easier than doing it the hard way as you are now. But since it isn't easily explained in a Forum discussion, you should take Eriksimon's advice & read the chapter in the manual he mentions.
    Your other option is to check out Ultrabeat.
    If you get stuck, let us know.
    (If you had been talking about Loops, it would have been a different kettle of fish!)

  • How to link stability samples to inspectionplan (CWBQM)

    Hi Guys
    Can you just let me know how i link individual samples for quality inspection,in stabilty studies to the inspection  plan of (CWBQM).
    I have to  link that to the individual physical samples ,curently  we go to change scheduling and in that manually attaching group and group counter to the physical samples.
    Please let me know
    Regards
    Mangesh

    Hi Guys
    To  the message below ,the same ia m asking inshort  can anyone tell me how to  create a separate inspection plan for each storage condition specified in the stability study.
    Where you can link storage conditions in CWBQM ?
    Thanks in advance
    Regards
    Mangesh

  • How to manipulating HelloPartner sample to run on two machines

    Hi,
    I am trying to manipulate the HelloPartner example, so the Requester + Hub
    is running on one machine, and Replier is running on a different machine (on
    the same LAN).
    I have changed the following:
    RequesterAndHub-machine:
    ReplierPartner (trading partner):
    General-tab: "locale" to "remote"
    Transport-tab (URI Endpoint): "http://127.0.0.1:7001/ReplierPartner" to
    "http://nameOfReplierMachine:7001/ReplierPartner"
    Replier-machine:
    HelloPartnerHub (trading partner):
    General-tab: "locale" to "private"
    Transport-tab (URI Endpoint):
    "http://127.0.0.1:7001/HelloPartnerHub" to
    "http://nameOfResponseMachine:7001/HelloPartnerHub"
    The collaboration agreement between RequestorPartner and HelloPartnerHub has
    been disabled and unregistered.
    But when I try to run the sample I get the following error:
    to jan 31 14:25:59 CET 2002: <Hub> ERROR: Unrecoverable error
    com.bea.b2b.messagequeue.QueueException while delivering message from queue,
    HUB_MESSAGESTORE_URL_sendQueue Throwing away message:
    http://127.0.0.1:7001/RequestorPartner:HelloPartnerConversation:1.1:Requesto
    r_RequestorPartner_1012483415614_821012483415614:0 Exception:
    com.bea.b2b.messagequeue.QueueException
    How do I change the configuration to get the two machines communicate?
    Thanks, Morten

    It might be easier to answer "How to manipulate HelloPartner sample to run
    on two machines", which will help me learning WLI. Thanks.
    Morten
    "Morten Hansen" <[email protected]> wrote in message
    news:3c594c9a$[email protected]..
    Hi,
    I am trying to manipulate the HelloPartner example, so the Requester + Hub
    is running on one machine, and Replier is running on a different machine(on
    the same LAN).
    I have changed the following:
    RequesterAndHub-machine:
    ReplierPartner (trading partner):
    General-tab: "locale" to "remote"
    Transport-tab (URI Endpoint): "http://127.0.0.1:7001/ReplierPartner"
    to
    "http://nameOfReplierMachine:7001/ReplierPartner"
    Replier-machine:
    HelloPartnerHub (trading partner):
    General-tab: "locale" to "private"
    Transport-tab (URI Endpoint):
    "http://127.0.0.1:7001/HelloPartnerHub" to
    "http://nameOfResponseMachine:7001/HelloPartnerHub"
    The collaboration agreement between RequestorPartner and HelloPartnerHubhas
    been disabled and unregistered.
    But when I try to run the sample I get the following error:
    to jan 31 14:25:59 CET 2002: <Hub> ERROR: Unrecoverable error
    com.bea.b2b.messagequeue.QueueException while delivering message fromqueue,
    HUB_MESSAGESTORE_URL_sendQueue Throwing away message:
    http://127.0.0.1:7001/RequestorPartner:HelloPartnerConversation:1.1:Requesto
    r_RequestorPartner_1012483415614_821012483415614:0 Exception:
    com.bea.b2b.messagequeue.QueueException
    How do I change the configuration to get the two machines communicate?
    Thanks, Morten

  • How to adjust line sampling frequency in photoshop CC on surface pro 3

    I just got a Surface Pro 3 so that I could work on my art on the go. I am used to working on a mac with a cintiq, but fell for the hype that photoshop was optimized to work with SP3. However, when I try to use the brush tool, my lines look AWFUL! no matter what I do, the lines are wavy and messy looking. I read that PSCC raised the sampling frequency rate so that the line would look better, but I think THAT is exactly why it looks awful. the Surface pro seems to be picking up EVERY microscopic twitch. I cant work like this ... and I am surely not the only person using PSCC on the SP3, as they're ADVERTISED to work together. How do I adjust the sampling frequency so that my line looks as smooth as it does on a Wacom in photoshop? ...because THAT image below.. looks like crap.

    I'm not an artist so I don't draw using my Surface pro 3.  Many have the same issue with wacom tablets and cintigu from what I read.  They seem to be able to solve their concerns by installing a plugin Lazy Nezumi Pro - Mouse and Pen Smoothing for PhotoShop and other Apps Remember I don't draw and have not installed that plug-in so I can not state that it works well on a surface pro 3.
    Doing a Web search  I found this I quote
    Hi guys,
    I'm the author of Lazy Nezumi Pro!
    Here's the situation with the Surface Pro 3: I'm not 100% sure, but I think the people who got LNP to work with the SP3 the ones who have Photoshop CC 2014, which uses the new Windows 8 native tablet API (instead of Wintab, which is very old tech). If you have this version, make sure you enable Windows Ink for it to work right. It's possible that the N-Trig Wintab implementation is just buggy, or that it's doing something very differently than what LNP is expecting (this is probably the case since I have reports that PS works fine without LNP). Unfortunately I won't know more until I get a SP3 myself and do some testing/debugging.
    I'm sorry I can't help more right now, but I'll keep you updated!  

  • How to test the sample adapter code on PI 7.1?

    Hi,
    I would like to test the sample adapter on PI 7.1.
    I followed these explanations:
    /people/gowtham.kuchipudi2/blog/2006/01/04/testing-sample-adapter
    How-to deploy Sample Adapter in PI 7.1
    but I still can't get things working.
    The com.sap.aii.adapter.sample.ra.jar file I retrieved from the server doesn't contain any ra.xml file so I took the SampleRA.xml I found in the sample_ra.jar file fetched from a PI 7.0 server.
    I used this XML file content to fill the adapter metadata in the integration repository.
    The sample adapter is deployed and its JNDI name is
    deployedAdapters/com.sap.aii.adapter.sample.ra/shareable/com.sap.aii.adapter.sample.ra
    I don't know where to put this information in the metadata.
    As a result my sender and receiver communication channels are said to be running in the runtime work bench but there is no message thrown when I put the expected file in the source directory.
    The sender communication channel stays blind.
    Could someone help me?
    Thanks in advance for any help.
    Olivier

    Hi,
    Thanks for your answer but there is no sample_ra.rar file on my PI 7.1 server.
    Instead I have a com.sap.aii.adapter.sample.ra.jar file that is located at
    D:\usr\sap\P71\DVEBMGS01\j2ee\cluster\apps\sap.com\com.sap.aii.adapter.sample.ra\connector\bin\com.sap.aii.adapter.sample.ra.rar
    and
    D:\usr\sap\P71\DVEBMGS01\j2ee\cluster\apps\sap.com\com.sap.aii.adapter.sample.ra\connector\connectors\com.sap.aii.adapter.sample.ra.rar
    It is the same file and its content is:
    testing: META-INF\                OK
    testing: META-INF\MANIFEST.MF     OK
    testing: com\                     OK
    testing: com\sap\                 OK
    testing: com\sap\aii\             OK
    testing: com\sap\aii\af\          OK
    testing: com\sap\aii\af\sample\   OK
    testing: com\sap\aii\af\sample\adapter\   OK
    testing: com\sap\aii\af\sample\adapter\ra\   OK
    testing: com\sap\aii\af\sample\adapter\ra\CCIConnection.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\CCIConnectionFactory.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\CCIConnectionMetaData.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\CCIConnectionRequestInfo.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\CCIInteraction.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\CCIResourceAdapterMetaData.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\SPIConnectionManager.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\SPIManagedConnection.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\SPIManagedConnectionFactory$XIManagedConnectionFactoryController.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\SPIManagedConnectionFactory.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\SPIManagedConnectionMetaData.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XIAdapterCategories.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XIConfiguration.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XIConnectionEventListenerManager.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XIConnectionSpecImpl.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XIInteractionSpecImpl.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XILocalizationUtilities.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XIMessageFactoryImpl.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XIMessageRecordImpl.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XISecurityUtilities$1.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XISecurityUtilities.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\XITrace.class   OK
    testing: com\sap\aii\af\sample\adapter\ra\package-version.properties   OK
    testing: com\sap\aii\af\sample\adapter\ra\rb_JCAAdapter_ChannelMonitor.properties   OK
    testing: com\sap\aii\af\sample\adapter\ra\rb_JCAAdapter_ChannelMonitor_de.properties   OK
    testing: com\sap\aii\af\sample\adapter\ra\rb_JCAAdapter_ChannelMonitor_en.properties   OK
    testing: com\sap\aii\af\sample\adapter\ra\rb_JCAAdapter_ChannelMonitor_fr.properties   OK
    testing: com\sap\aii\af\sample\adapter\ra\rb_JCAAdapter_ChannelMonitor_ja.properties   OK
    There is no ra.xml file
    Regards
    Olivier

  • How to install the sample shema (HR)

    Hi,
    I'm begining to study the class about the introduction to PL/SQL and I need the shema HR for it. But I lost it during a 'cleaning' of my PC to retrieve some place. So I created a new database named 'HR' and I tried to run the hr_* scripts that I found in .../demo/shema/human_resources/ but I can do anything ! Do you know how I can reinstall the HR schema quickly with the objets ?
    Thank you for your help, I'm very frustrated....

    You will be able to find that information here too.
    Sample Schemas Contents / Search / / PDF
    http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96539.pdf
    Joel P�rez

Maybe you are looking for