How do I clean the ink reservoirs an 1350 all in one?

I have had this printer for many years and love it. Even though I am on Windows 7 I found I could install it in virtual xp and it works in 7. I have heard alot about cleaning out the ink reserviors or replacing the absorbtion sponges but can't find how to do it. Can anyone help? All my research came about because the yellow ink slot on the print head seemed to be clogged and after trying everything I fould it still won't work. Thanks, trekcip

You will need to install the HP scanning software provided with the All-in-one. Once you have done that, follow the manufacturers directions, which should include using a USB or network cable to connect the HP to your MacBook.
Each scanner has different instructions, so the manu's instructions are the best to use. If you are having trouble after that, you would most likely get better response from the HP support sites.
Good Luck.
Adam

Similar Messages

  • How to clean the printheads on a C209a all in one

    I have just replaced all my ink cartridges, but can't get anything to print. I re-installed the printer, ran the 'clean printhead' command in the 'tools' menu and still nothing.  Can someone please help me with how to clean the actual printheads manually so that I can get the machine to print?

    Hello Macuser0210,
    I am sorry to hear that you are having issues with faded streaks on your documents.
    I found the following on HP.com. Solution Seven in the document might help you resolve your issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02206095&tmp_task=solveCategory&cc=us&dlc=en&la...
    Regards,
    Lynn_B
    I work on behalf of HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • How do i remove the printhead on hp 1600xi all in one printer?

    I keep getting the message remove and check cartridge on the display of my hp 1600xi all in one printer. I've replaced the ink cartridges. Turned it off, and on. Unplugged it, and plugged it back in. I still get that message. The only other thing that I can think of is to replace the printhead. Any suggestions on how to do this?

    Hello jrfirepup, and welcome to the HP Forums.
    I see you are looking into printhead options.  This particular model of printer has built-in printheads, making them non-removable.
    I would recommend removing the cartridges and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest this document on Ink Smears or Streaks.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HOW DO I INCREASE THE SIZE O MY 7640 ALL IN ONE PRINTER

    HOW CAN I INCREASE MY FONT SIZE IN MY HP 7640 PRINTER

    Hello jrfirepup, and welcome to the HP Forums.
    I see you are looking into printhead options.  This particular model of printer has built-in printheads, making them non-removable.
    I would recommend removing the cartridges and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest this document on Ink Smears or Streaks.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • New ink cartridges in Photosmart C5180 but still not printing clearly. How do I clean the heads?

    I changed all 5 ink cartridges on my HP C5180 Photosmart All-in-One printer, but the print is still as if I'm out of black ink.  How do I clean the heads and realign them?

    steelpony5555 wrote:
    When your printer stops printing one or 2 of the colors it means your print head is clogged. Tech support will have you remove the print head and clean the copper contacts on the bottom, but that is not enough. Hold the head in a rag and shake it, lots of ink will come out of the inside. I saw one case where the guy held his print head under hot water till it ran clear. Not sure of the long term effects on the head if you do that. Mine has clogged twice now and it has been ink inside the head.
    I would absolutely suggest not shaking the printhead.  Ink is required in the printhead, and if air gets into the printhead it can cause printhead failure.  See this page for an ongoing discussion.
    For the C5180 this is moot, since the printhead cannot be removed to shake it in the C5180 with its permanant printhead.  I would suggest three levels of printhead cleaning as described in Step 3 of this page for the c5180.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do i install the ink cartridges in photosmart 7520

    how do i install the ink cartridges in photosmart 7520

    Hi,
    Please check from page #42 of the following manual:
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03456524/c03456524.pdf
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I clean the ear jack???

    When the ear/headphones are in the iPod's ear jack, it does send sound to the right ear piece. How could I clean the ear jack without sending it to apple?

    - Try blowing it out
    - Insert/remove the headphone plug a dozen or so times.
    - Insert a plastic or wood stick the size of the plug. However, be careful not to break it off inside the jack
    If the jack needs replacement Apple will only exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place will replace the jack for less. Here is one place:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • How do I clean the under side of glass in my 2610xi all in one printer

    How do I clean the under side of the scanning glass in my 2610xi all-in-one printer?

    Actually, HP seems to have posted clear instructions here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00553775&cc=us&lc=en&dlc=en&product=303753&dlc=...
    If this ends up with a space on your computer before docname, remove it/

  • How do i clean the screen of my macbook with retina display?

    how do i clean the screen of my macbook with retina display?

    To clean the screen on your MacBook, MacBook Pro, or MacBook Air, first shut down the computer and unplug the power adapter. Dampen the included cleaning cloth with just water and wipe the screen. Do not spray liquid directly onto the screen.
    Important: The bottom case of the MacBook (13-inch, Late 2009) and MacBook (13-inch, Mid 2010) uses a soft nonslip material. Use a 3M Gray Microfiber or soft dye-free, lint-free cloth to clean the bottom case.
    http://support.apple.com/kb/ts1544

  • How do you clean the iPad magnetic cover? Mine is light gray, I did not pick the color as I got it from work.

    How do you clean the iPad magnetic cover? Mine is light gray, I did not pick the color as I got it from work.

    You can clean any mild soap(no harsh chemical) as i do mine i just take it off ipad from cover wash throughly inside and out and hang it until dry.

  • How do you clean the leather iPad cover?

    How do you clean the leather iPad cover?

    I've used my leather iPad cover (black) on three different iPads now - the iPad 2, the iPad 3 and the iPad 4 - over a period of more than two years.  I've never found the need to clean the cover.  If I were to do that, I would probably use a clean microfiber cloth much like the one I would use to clean the iPad's screen.

  • How do u clean the ear piece, can't hear when on the phone with someone

    How do u clean the ear piece can't hear when on the phone with someone

    When you're calling them is your phoned muted by any chance?

  • How can I check the ink level in my Hp printer j4580

    I am so frustated, and upset with my hp printer, the only thing I waant to is how can I check the ink level in my Hp printer j4580, sound simple, well I have spend hours traying, and  I still don't know how to do it. This is ridicule

    Hello manguelo,
    Welcome to the HP Forums.
    I see that you are attempting to check the ink levels on the printer.
    Here is a link that will take you to a document that gives detailed instructions on Checking Ink Levels for HP Officejet J4500 and J4600 All-in-One Printer Series.
    Please feel free to write me back if you have any other questions or concerns.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Please..how do you clean the Macbook Pro silver-coloured (aluminum?) outer case?

    Please..how do you clean the Macbook Pro silver-coloured (aluminum?) outer case?

    CailinGaelach wrote:
    Vodka -- alcohol.  Makes sense.  I guess Irish whiskey wouldn't work as well due to the colour, because Jameson's would be my bevvy of choice if I were to down a few shots before.
    Drink the Irish, and as for the cleaning Vodka, buy the absolute cheapest one in the store, the one you wouldn't want to drink.
    They all meet FDA standards for human consumption unlike alcohol in the drug store.

  • How do I get the text to flow throughout more then one page.

    Hello,
    I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
    I could always send the file to someone to see if they can figure it out.
    Thank you,
    Natalie

    Thank you so much !
    but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
    Natalie
    Date: Wed, 12 May 2010 07:53:12 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do I get the text to flow throughout more then one page.
    Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
    https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
    Thanks
    Srini
    >

Maybe you are looking for

  • How to track changes in Adhoc query?

    Hi all, We have requirement for retrofitting  the changes done in one Server to other, in the process the Changes in New server should not be overwritten.Currently for Adhoc queries - we're downloading from one server-  loading to the New server. Is

  • Script and program name for MM:OUTWARD CHELLAN

    Hi all , can any one give me the script name and program name  for MM:OUTWARD CHELLAN. Regards, Arun.j

  • Programmaticallyset vertical space between frames

    Does anyone know how to programmatically set the verticaly space between frames property from the format trigger ???? TIA

  • Need help regarding converting text to Lines and Arcs.

    In my program i have text.Lets say the text is JAVA. Now i need to group that text(JAVA) in the form of line and arcs. Its like organizing lines and arcs and make it looks like a text(JAVA). Can we have such a possibilities to do that? Please help re

  • Transforming LARGE xml file

    Hi All, I am trying to transform a 230 meg xml document and it is taking very long too complete. I am using the TransformerFactory etc in the xalan.jar with the new release of the java extensions. Anyone out there have any ideas/advice that they can