How do I clear a B200 error on a MG5220

I tried suggestion on line and even removed, cleaned , dried and reinstall ed the print head - no luck.

Hello marthagill.
Please try the following to see if we can resolve your issue:
1. Open the cover of the printer.
2. Remove all ink tanks from the printer.
3. Lift up the gray locking lever on the side of the ink tank holder.
4. Gently remove the print head from the carriage unit.
5. Place the print head back in and lock the lever down.
6. Place all of the ink tanks back in the printer.
7. Close the cover and turn the printer off.
8. Unplug the power from the printer. Leave the power unplugged for about 5-10 minutes.
Plug the power back in and turn the printer on.
If the error persists, please contact our support group using the link below for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

HT4623 how do you clear a 404 error when trying to go to a secure site

Wife and I both have ipads, had to have internet support, (rural area,small provider) to be able to connect,tech disabled security(don't know if it was on router or my ipad, but wife can get on banking sites and mine comes up as "HTTP Error 404 Not found" on 1 secure website and "Server Error '/ ' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster." on the other secure website. Has anyone else encountered this problem and know how to fix it? We are at least 60 miles from the nearest Apple repair shop.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

HT4528 How do I clear the following error message? Killing my battery!

Mar 21 14:12:15 Arkie wifid[14] <Error>: WiFi:[385585935.693151]: WiFi unquiescing requested by "locationd" IOS 6.1.3

See if this helps
http://support.apple.com/kb/ts1559

How to clear device/bundle errors

Hi all: I manage about 100 PCs with ZCM 11.2.4. I need a way to clear all device/bundle error messages, both for bundles and policies, so that the icons on ZCC all show clear. I know I can delete all error messages, but how do I clear all bundle error messages? I want to get rid of the red error icon so I can easily see which computers are getting these errors since they were cleared. Right now the error icon does not go away.
Thanks for the help, Chris.

cmosentine <cmosentine@N0_5pam_vrapc.com> wrote:
> DQpUaGF0IGNsZWFycyBtZXNzYWdlcyBsaWtlIHlvdSBzYXkgYn V0IGl0IGRvZXMgbm90IGNsZWFy
> IGJvdGggaWNvbnMuICBXaGF0IEkgbWVhbiBpcyBmb3IgZWFjaC Bjb21wdXRlciB0aGVyZSBhcmUg
> dHdvIGljb25zLCB0aGUgY2hlY2tsaXN0IGFuZCB0aGUgY2lyY2 xlLiAgQ2xlYXIgdGhlIG1lc3Nh
> Z2VzIHR1cm5zIHRoZSBjaXJjbGUgYmFjayB0byBncmVlbiBidX QgdGhlIGNoZWNrbGlzdCBpY29u
> IHdpbGwgc3RpbGwgaGF2ZSB0aGUgcmVkIHJpbmcvc2xhc2ggKH RoZSBkbyBub3QgZ28gc2lnbikg
> b24gaXQuICBJdCBpcyB0aGlzIGljb24gSSBuZWVkIGNsZWFyZW QuDQoNCg0KIA0KDQo+Pj4gbm9w
> MTk4Mzxub3AxOTgzQG5vLW14LmZvcnVtcy5ub3ZlbGwuY29tPi A4LzI4LzIwMTQgODoxNiBBTSA+
> Pj4NCg0KDQoNCkdvIHRvICJDb25maWd1cmF0aW9uIiAtPiAiU3 lzdGVtIGluZm9ybWF0aW9uIi4u
> LiBoZXJlIHlvdSBjYW4gY2hvb3NlDQoiTWVzc2FnZSBDbGVhbn VwIiBvbiB0aGUgbGVmdCBhbmQg
> c2VsZWN0IGEgZnJvbSBhbiB0byBkYXRlLiBTZWxlY3QNCiJQZX JtYW5lbnRlbHkgRGVsZXRlIi4N
> ClRoaXMgc2hvdWxkIGdpdmUgeW91IGEgImZyb20gc2NyYXRjaC IgdmlldyBpbiB0aGUgWkNDIDop
> DQoNCg0KLS0gDQotLQ0KTmllbHMNCkkgaGF2ZSBhbHdheXMgbG lrZWQuLi4gQ293YWJ1bmdhIQ0K
> DQpJZiB5b3UgZmluZCB0aGlzIHBvc3QgaGVscGZ1bCwgcGxlYX NlIHNob3cgeW91ciBhcHByZWNp
> YXRpb24gYnkNCmNsaWNraW5nDQpvbiB0aGUgc3RhciBiZWxvdy 4NCkEgbWVtYmVyIG11c3QgYmUg
> bG9nZ2VkIGluIGJlZm9yZSBzL2hlIGNhbiBhc3NpZ24gcmVwdX RhdGlvbiBwb2ludHMuDQotLS0t
> LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS 0tLS0tLS0tLS0tLS0tLS0tLS0t
> LS0tLS0tLS0tLS0NCm5vcDE5ODMncyBQcm9maWxlOiBodHRwcz ovL2ZvcnVtcy5ub3ZlbGwuY29t
> L21lbWJlci5waHA/dXNlcmlkPTU3MjYyDQpWaWV3IHRoaXMgdGhyZWFkOiBodHRwcz ovL2ZvcnVt
> cy5ub3ZlbGwuY29tL3Nob3d0aHJlYWQucGhwP3Q9NDc5MDE3
> --____JOLVDYQQHCXKLYAOQDJX____ Content-Type: multipart/related;
> boundary="____YIFONLXFRFYYQLYMNALF____"
>
> --____YIFONLXFRFYYQLYMNALF____
> Content-Type: text/html; charset=utf-8
> Content-Transfer-Encoding: base64
> Content-Disposition: inline; modification-date="Thu, 28 Aug 2014 08:45:33 -0400"
>
> PGh0bWw+PGhlYWQ+CjxtZXRhIGh0dHAtZXF1aXY9IlgtVUEtQ2 9tcGF0aWJsZSIgY29udGVudD0i
> SUU9MTEiPgo8bWV0YSBuYW1lPSJHZW5lcmF0b3IiIGNvbnRlbn Q9Ik5vdmVsbCBHcm91cHdpc2Ug
> Q2xpZW50IChWZXJzaW9uIDE0LjAuMCAgQnVpbGQ6IDExNTI0My kiPgo8bWV0YSBodHRwLWVxdWl2
> PSJDb250ZW50LVR5cGUiIGNvbnRlbnQ9InRleHQvaHRtbDsgY2 hhcnNldD11dGYtOCI+PHN0eWxl
> Pjwvc3R5bGU+PC9oZWFkPgo8Ym9keSBzdHlsZT0iZm9udDogMT BwdC9ub3JtYWwgU2Vnb2UgVUk7
> IG1hcmdpbjogMTZweCAxNnB4IDRweDsgZm9udC1zaXplLWFkan VzdDogbm9uZTsgZm9udC1zdHJl
> dGNoOiBub3JtYWw7Ij48ZGl2IGNsYXNzPSJHcm91cFdpc2VNZX NzYWdlQm9keSIgaWQ9Ikdyb3Vw
> V2lzZVNlY3Rpb25fMTQwOTIyOTc4MTAwMF9HUkFETUlOQHZyYX BjLmNvbV9DODc4REU4MDE2NzEw
> MDAwODc5MTYwMDA2QzAwNjIwMF8iPjxkaXY+VGhhdCBjbGVhcn MgbWVzc2FnZXMgbGlrZSB5b3Ug
> c2F5IGJ1dCBpdCBkb2VzIG5vdCBjbGVhciBib3RoIGljb25zLi ZuYnNwOyBXaGF0IEkgbWVhbiBp
> cyBmb3IgZWFjaCBjb21wdXRlciB0aGVyZSBhcmUgdHdvIGljb2 5zLCB0aGUgY2hlY2tsaXN0IGFu
> ZCB0aGUgY2lyY2xlLiZuYnNwOyBDbGVhciB0aGUgbWVzc2FnZX MgdHVybnMgdGhlIGNpcmNsZSBi
> YWNrIHRvIGdyZWVuIGJ1dCB0aGUgY2hlY2tsaXN0IGljb24gd2 lsbCBzdGlsbCBoYXZlIHRoZSBy
> ZWQgcmluZy9zbGFzaCAodGhlIGRvIG5vdCBnbyBzaWduKSBvbi BpdC4mbmJzcDsgSXQgaXMgdGhp
> cyBpY29uIEkgbmVlZCBjbGVhcmVkLjxicj48L2Rpdj48c3Bhbi BzdHlsZT0ibWFyZ2luLWJvdHRv
> bTogNXB4OyBkaXNwbGF5OiBibG9jazsiPiZuYnNwOzwvc3Bhbj 48ZGl2IGNsYXNzPSJHcm91cFdp
> c2VNZXNzYWdlQm9keSIgaWQ9Ikdyb3VwV2lzZVNlY3Rpb25fMT QwOTIyODE2MjAwMF9ub3AxOTgz
> QG5vLW14LmZvcnVtcy5ub3ZlbGwuY29tIj48c3BhbiBjbGFzcz 0iR3JvdXB3aXNlUmVwbHlIZWFk
> ZXIiPiZndDsmZ3Q7Jmd0OyBub3AxOTgzJmx0O25vcDE5ODNAbm 8tbXguZm9ydW1zLm5vdmVsbC5j
> b20mZ3Q7IDgvMjgvMjAxNCA4OjE2IEFNICZndDsmZ3Q7Jmd0Oz xicj48L3NwYW4+PGRpdj48ZGl2
> Pjxicj5HbyB0byAiQ29uZmlndXJhdGlvbiIgLSZndDsgIlN5c3 RlbSBpbmZvcm1hdGlvbiIuLi4g
> aGVyZSB5b3UgY2FuIGNob29zZTxicj4iTWVzc2FnZSBDbGVhbn VwIiBvbiB0aGUgbGVmdCBhbmQg
> c2VsZWN0IGEgZnJvbSBhbiB0byBkYXRlLiBTZWxlY3Q8YnI+Il Blcm1hbmVudGVseSBEZWxldGUi
> Ljxicj5UaGlzIHNob3VsZCBnaXZlIHlvdSBhICJmcm9tIHNjcm F0Y2giIHZpZXcgaW4gdGhlIFpD
> QyA6KTxicj48YnI+PGJyPi0tIDxicj4tLTxicj5OaWVsczxicj 5JIGhhdmUgYWx3YXlzIGxpa2Vk
> Li4uIENvd2FidW5nYSE8YnI+PGJyPklmIHlvdSBmaW5kIHRoaX MgcG9zdCBoZWxwZnVsLCBwbGVh
> c2Ugc2hvdyB5b3VyIGFwcHJlY2lhdGlvbiBieTxicj5jbGlja2 luZzxicj5vbiB0aGUgc3RhciBi
> ZWxvdy48YnI+QSBtZW1iZXIgbXVzdCBiZSBsb2dnZWQgaW4gYm Vmb3JlIHMvaGUgY2FuIGFzc2ln
> biByZXB1dGF0aW9uIHBvaW50cy48YnI+LS0tLS0tLS0tLS0tLS 0tLS0tLS0tLS0tLS0tLS0tLS0t
> LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS 0tPGJyPm5vcDE5ODMncyBQcm9m
> aWxlOiA8YSBocmVmPSJodHRwczovL2ZvcnVtcy5ub3ZlbGwuY2 9tL21lbWJlci5waHA/dXNlcmlk
> PTU3MjYyIj5odHRwczovL2ZvcnVtcy5ub3ZlbGwuY29tL21lbW Jlci5waHA/dXNlcmlkPTU3MjYy
> PC9hPjxicj5WaWV3IHRoaXMgdGhyZWFkOiA8YSBocmVmPSJodH RwczovL2ZvcnVtcy5ub3ZlbGwu
> Y29tL3Nob3d0aHJlYWQucGhwP3Q9NDc5MDE3Ij5odHRwczovL2 ZvcnVtcy5ub3ZlbGwuY29tL3No
> b3d0aHJlYWQucGhwP3Q9NDc5MDE3PC9hPjxicj48YnI+PGJyPj xicj48L2Rpdj48L2Rpdj48L2Rp
> dj48L2Rpdj48L2JvZHk+PC9odG1sPg==
> --____YIFONLXFRFYYQLYMNALF____--
>
> --____JOLVDYQQHCXKLYAOQDJX____--
Sorry, but I'm not sure this can be easily cleared... If possible? I'll ask
Novell.
Nops

How do I clear Error 1311 when downloading Adobe Reader 11

How do I clear Error 1311 when downloading Adobe Reader 11 ? Cannot find missig file C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AB0000000001}\DATA1.CAB

Try the MSI installer http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi (English version 11.0.0 for Windows).

How to prevent print head clog up and B200 Error ?

I just went through a horrid time getting rid of a B200 error due to the printer head clog up. I had to soak the head for at least one hour in a solution of warm water and a bit of oxy clean to get the printer to work again. I almost gave up and was at the point of buying a new printer .
My question is : How to prevent this from happening again especially during 2 to 3 week vacations when the printer is turned off?
Tks

Hi sportflyer,
There isn't a way to prevent a B200 error. If you do encounter the error again, it is recommended that you contact live technical support . There is NO charge for this call. Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Canon MX870 B200 error, how to use scan only?

I have Canon MX870 which I only use it for scan. When I'm turning the printer on at the booting process it give me B200 error and STOP to work completely.I have to open and close cartridge door couple times at the startup to can skip the B200 error and be able to use the scanner.I know the problem is related to cartridge or printhead or something about printing. I only use this machine for scanning and i don't need to print at all. How I can disable or disconnect the printing component on this machine to be able to use just the scanner?
or at least disable the printer diagnostic at the start up?

Hi g6381646, We do not have instructions for disabling the printer diagnostic at startup or disconnecting the printing component of the printer; the printer will require servicing to resolve the error. Please call or email us using one of the methods on the Contact Us page to obtain your servicing options.

TS1424 how do I clear error download. tap to retry?

How do I clear error download in Itunes downloads on my iphone?
My phone will download other music but keeps leaving 2 particular albums in my down load que.
Yet the music is shown in my libary as purchased and downloaded.

I am also having this same problem. I have no videos in the video app as they have already exceeded their rental period. In ITunes, I show the "More" button has two waiting to be downloaded with an error "download error, tap to retry". I retry but I get the same error message. They remain on my phone taking up memory too. HELP?

When trying to download a libraory book I get an error:2004 warning. how do I clear this?

when trying to download a libraory book I get an error:2004 warning. how do I clear this?

Try here:
iTunes Store: "Error (-50)" when downloading purchased content

I have an error 0xc18a0306 on my C6280 printer. How can I clear it?

I have an error 0xc18a0306 on my C6280. I have tried switching it off and back on and removing and replacing the ink cartridges. It still wont print and comes up with the same error message. How can I clear it?

If resetting the C6280 did not fix the error code then it will have to be serviced or replaced.This link provides some info on your error code.

I keep getting error 1004 on my iphone 3GS how do i clear this?

I keep getting error 1004 on the iphone 3GS - how do I clear this?

Yep Settings> Store....tap the ID...log out and then sign back in again.
I had to de authorise my computers when I bought my new iMac so I'm guessing my Iphone needed to just sign in again to authorise the device on my itunes ID.

Device storage error - how do you clear it?

i repeatedly keep getting the error: "device storage is full, please delete useless files, otherwise applications might exit unexpectedly"
I have 3.6GB free showing on the device storage.
How can i clear this error?

Sorry to hear that you're having difficulty with your Ellipsis 7, cincinnatisteve! Even though you have plenty of available storage, the issues you're having may be related to a corrupt application. I recommend putting your device into Safe Mode (http://vz.to/UujJtt) for a period. Please keep us advised how the device behaves under Safe Mode. Thanks!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

How do I clear error message "Incompatible Printerhead"

This just came on after I installed a new ink cartridge.. took the ink back to the store and purchased a new one, message is still showing.. how do I clear this so I can use my printer... thanks... frustrated.!

This just came on after I installed a new ink cartridge.. took the ink back to the store and purchased a new one, message is still showing.. how do I clear this so I can use my printer... thanks... frustrated.!

How to Clear the Input errors in a Cisco ASA Interface?

Hi Everyone,
                  My Expertise with Cisco ASA is Very less. I have observed Input errors in a Couple of Interfaces in Cisco ASA 5540 Firewall.
296867 input errors, 0 CRC, 0 frame, 296867 overrun, 0 ignored, 0 abort
0 pause input, 0 resume input
0 L2 decode drops
102091138038 packets output, 96596756282996 bytes, 2683 underruns
0 pause output, 0 resume output
0 output errors, 0 collisions, 2 interface resets
0 late collisions, 0 deferred
52 input reset drops, 0 output reset drops, 0 tx hangs
input queue (blocks free curr/low): hardware (255/230)
output queue (blocks free curr/low): hardware (255/0)
I need to Clear the Input errors on this particular Interface.
Will Clear interface GigabitEthernet 0/0 will help?
Thanks in Advance,
Nanda

Hi,
Here is an example of using the command on my own ASA5505 firewall
interface Ethernet0/0
description WAN Access
switchport access vlan 10
ASA# sh interface Ethernet 0/0
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
        Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
        Input flow control is unsupported, output flow control is unsupported
        Description: WAN Access
        Available but not configured via nameif
        MAC address 0025.45f4.0a9a, MTU not set
        IP address unassigned
        9679 packets input, 6532697 bytes, 0 no buffer
        Received 2 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 pause input, 0 resume input
        0 L2 decode drops
        0 switch ingress policy drops
        8421 packets output, 2202683 bytes, 0 underruns
        0 pause output, 0 resume output
        0 output errors, 0 collisions, 0 interface resets
        0 late collisions, 0 deferred
        0 rate limit drops
        0 switch egress policy drops
        0 input reset drops, 0 output reset drops
ASA# clear interface Ethernet0/0
ASA# sh interface Ethernet 0/0
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
        Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
        Input flow control is unsupported, output flow control is unsupported
        Description: WAN Access
        Available but not configured via nameif
        MAC address 0025.45f4.0a9a, MTU not set
        IP address unassigned
        0 packets input, 0 bytes, 0 no buffer
        Received 0 broadcasts, 0 runts, 0 giants
        0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 pause input, 0 resume input
        0 L2 decode drops
        0 switch ingress policy drops
        0 packets output, 0 bytes, 0 underruns
        0 pause output, 0 resume output
        0 output errors, 0 collisions, 0 interface resets
        0 late collisions, 0 deferred
        0 rate limit drops
        0 switch egress policy drops
        0 input reset drops, 0 output reset drops
interface Ethernet0/0
description WAN Access
switchport access vlan 10
- Jouni

C5550 -How do I reset a persistant "Clear paper Jamm" error mesage?

Hi,
I have a photosmart c5550 all in one printer. I had a paper jam and cleared it using the instructions from the user manual. I have actually done this several times now, and am absolutely sure that there is no paper jam at this point in time. The printer resets to the "clear paper jam" error state on power up. I would like to know the procedure to do a hard system reset, to reset the printer. The reset procedure of removoing the power cord does nothing to clear this persistant error. Does anyone know the proper procedure to do a hard reset?
Thanks,
Phil

The steps in this video will resolve persistant paper jam messages.
I am an HP employee.

How do I clear a B200 error on a MG5220

Similar Messages

Maybe you are looking for