How do I clear bios password (compaq CQ-62)

How do I clear bios password (compaq CQ-62) the key code is 62154197

Hi,
Please try: 73832119
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How to push a BIOS password

    Hello,
    I've build a Task Sequence that includes a reboot and I wondered if it is possible to 'bypass' or include the BIOS password in any way in the Task Sequence so the computer does not get 'stuck' while rebooting.
    The (Dell) laptops in our company all have the same "Admin Password" and an individual "System Password". This System Password is set by the end-user himself.
    With Dell laptops (don't know about others), if you don't know the System Password, you can continue the boot sequence by entering the Admin Password. So only 1 password is actually needed..
    I looked into the
    Dell OpenManage Client Intrumentation (OMCI) 8.2 application and figured out how to erase the BIOS passwords with PowerShell with this command:
    (gwmi DCMI_BIOSService -Namespace root\dcim\sysman).SetBIOSAttributes($null,$null,"AdminPwd","","ourpassword",$null)
    Though I prefer NOT to erase the Admin and System Password of about 1000 users just to be able to continue an installation ;)
    Is there any other way to solve this problem?

    If these are Dell Enterprise computers, you can use the
    cctk.exe tool from the
    Dell Client Configuration Toolkit.
    Create an SCCM package from this tool, and you can use it in your Task Sequence:
    - Before reboot: Remove password. --> cctk.exe --setuppwd= --valsetuppwd=<currentPassword>
    - After reboot: Set password. --> cctk --setuppwd=<password>

  • Need to clear bios password on Elitebook 8460p

    I've opened it up, no RTC found. 

    Removing the battery will not clear BIOS password on an Elitebook.It usually requires service from HP.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How To Remove or Clear bios password?

    This information is intended for experienced users. It is not intended for basic users, hackers, or computer thieves. Please do not try any of following procedures if you are not familiar with computer hardware. I'll not be responsible for the use or misuse of this information, including personal injury, loss of data or hardware damage. So use it at your own risk.A. By Using the Motherboard Jumper:In most motherboards CMOS battery is soldered, which makes it difficult to remove the battery. In this case we use another method.Almost all motherboards contain a jumper that can clear all CMOS settings along with the BIOS password. The location of this jumper varies depending upon the motherboard brand. You should read your motherboard manual to check its location. If you don't have the manual then look for the jumpers near the CMOS battery. Most of the manufacturer label the jumper as CLR, CLEAR, CLEAR CMOS, etc.When you find the jumper, look carefully.  There will be 3 pins and the jumper will be joining the center pin to either left or right pin. What you need to do, is remove the jumper and join the center pin to the opposite pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin.Make sure to turn the PC off before opening the cabinet and resetting the jumper. B. By Using Software:
    I have found that BIOS/CMOS Password Recovery Tool is the most effective.:
    BIOS/CMOS Password Recovery Tool is a program that works instantly to remove any lost or forgotten BIOS/CMOS password. Simply boot your PC to DOS and execute the program, and get access to forgotten BIOS/CMOS passwords in just secondsBIOS/CMOS Password Recovery Tool  Service:  http://www.biospasswordrecovery.com/

    faithikogor wrote:
    no I didn't
    Some require you do this 3x and it gives a lockout code that you can tell us and we can get a reset code to remove the bios password. If 3x doesn't work you might have to contact a MODerator on here and ask them if there is some other steps to try.

  • BIOS Password Compaq CQ58

    I forgot the BIOS Passwort of my HP Compaq CQ58.
    When I hit Enter 3 times the code 64628836 shows up.
    How can i reset this Password?
    This question was solved.
    View Solution.

    Hi,
    Enter:     71780218
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to delete a BIOS password (Satellite A30) - please help

    Hello. In the company I work there was a Toshiba Satellite A30 that had a BIOS password set.
    I was asked to remove the password and, inside the BIOS, I was able to clear the password (at least that is what I thought at first):
    BIOS asked for the current password and I typed it, then asked for a new password and I just pressed the ENTER key, and when I was asked to retype the new password I pressed the ENTER key again.
    After that, I saw that BIOS showed "PASSWORD (clear)" and I saved the changes and exit.
    To my surprise, I was asked for a password again, I just pressed the ENTER key and it showed an "INCORRECT PASSWORD" message, and the same message when I type the old password!!!
    I don't know if there was a Toshiba password when the computer was bought, but the manual that I downloaded from here does not mention that.
    Is there a way to fix this? I can't understand what may have happened!
    VERY MANY THANKS IN ADVANCE and thanks again for reading.
    [Edited by: admin on 06-Aug-05 08:27]

    Hello
    If the right password is not known to you there is no way to remove them. It can be removed only by Authorized service partner. Please contact them and they will do it for you. I assume that this can not be expensive.
    Check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true .
    Bye

  • How to get a bios password

    how do i recover my systems bios password for pavillion g6 dx2323  code 67499103

    Hi
    If you can remove the CMOS/RTC battery from the unit wait for 20mintues then connect it back again unit should not prompt for the password.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Recovery Bios Password COMPAQ PRESARIO CQ61

    Hello,
    I have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the bios password.
    The message that appear is "ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD".
    What can i do? After failing 3 times I get the message "System Disabled" and the code 73585421.
    Cheers
    This question was solved.
    View Solution.

    Yeahhhh! It worked! On my way to disable this config in bios...

  • Qosmio F30-112 - How to reset the BIOS password

    Hello
    I get broken laptop Qosmio F30 -112 with broken lcd.
    Now I get new lcd monitor and fix it but I can not access to bios password.
    I found out how to recover passwords for other tips of toshiba laptops but I can not find for this.
    What I looking is name of "jumper" that will reset my bios password.
    I was carrying a laptop in a local service but they did not know to remove the problem.
    Please help !!!
    Best regards,
    Antonio

    Hello
    Please visit http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ and there you will find authorized service providers for your country. Make a call and check what can be done about that.

  • How to remove the BIOS password on Satellite M40

    I'm looking for the the master Bios password or how can I reset the Bios password of Satellite M-40.
    I forget my Bios password and I can't used my laptop any more.
    Please I need the help

    I've got bad news for you... :( the BIOS password cannot be removed easily.
    As far as I know only the ASP (Toshiba authorized service provider) can remove the unknown BIOS password...
    Therefore I don't see any other solution as to contact the local ASP and to ask for the password removing.
    Bye & good luck

  • Satellite L300 - How to remove the BIOS password?

    Hi
    I bought a Satellite L300 about 8 months ago. I just used it a month and i just reopen it. I surprised by the labtop asking me to enter BIOS password without changing BIOS setting.
    I don't know what is the problem and how can I overcome it?
    Please Help

    Hello
    I also dont know why this happened but I have founded an interesting article:
    [How do I delete a BIOS Password if I have forgotten it?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11]
    Greets

  • Satellite x200 - how to reset the Bios password

    Hello,
    I purchased a used Satellite x200 to replace my old p100.
    When I received it, I remarked the bios is locked and the person I got it from is unable to tell me the password, arguing she used the finger imprint only four long.
    Is there a way to reset the bios password and how much would it cost?
    Regards

    Hi
    The BIOS password can be removed only by an authorized service provider in country where you live.
    So get in contact with Toshiba service partner and ask for BIOS password reset.

  • CLEAR BIOS PASSWORD AND POWER-ON PASSWORD

    How do I remove my bios password and power-on password on my notebook? Hope that you'll help me with this. Thanks!

    Enter BIOS by tapping F10 immediately after powering on to enter BIOS. You may need to tap Esc key first, then F10 at the menu.Once into BIOS under Security disable all passwords by entering your current password and leave the new password blank. Save & Exit

  • How to reset the BIOS Password ?

    Hi there, My uncle just gave me an HP Mini 110 for I can write my lessons on it more easily than on my 17" gaming laptop which is pretty heavy and not really carriable. So the first time I turned on the notebook, it asked me the BIOS Password. At this time my uncle does not remember he set a BIOS Password and we tried multiple passwords but none of them worked. I don't know if it can help but I have this Error Code when I type a wrong password three times in a row : CNU9393LKW I just noticed that this code error is the same as the notebook's serial number. I hope someone will be able to help me.  Have a good evening,

    Please try this Password = e9lofofksd Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold  down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

  • Portege 7220: Clearing BIOS password

    Hi,
    I have just installed WinXP on my Portege 7220. I have installed the utilies download, but find that I cannot open the HW Setup application.
    I need to disable the BIOS password that a previous user had created.
    Advice please.
    Cheers,
    NEIL

    Hi
    Jack is right.
    Please check another topic about this theme:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6030&messageID=20808#20808
    Bye

Maybe you are looking for

  • Checkpoint Not Complete in NOARCHIVELOG mode

    Hi, This is first time I am seeing this. In my 11.1.0.7 development database on SOLARIS, I see checkpoint not complete message in alert log file and my database is running in NOARCHIVELOG mode. Can any expert throw light on this that why this warning

  • How do I get rid of xml tags but not when the tag has copyright in it?

    I tried this but it does not seem to do anything: temp_string=temp_string.replaceAll("\\<.*?(!copyright)\\>", "");An example of this is that if I have: <meta name ="copyright" > I do not want to get rid of the tag. In other words, I do not want to ge

  • Account requires a CO object

    Hi Gurus I'm doing a PGI Replinishment Delivery for material and plant. When I do a PGI from tarnsaction VL02n..the following error appears...please help me what to assign for this account and where do I need to the chnges.. Diagnosis You have not de

  • Cost collectors

    Hi Experts, Is there a way to manually do an entry to zero out a cost object and post it to the Product cost collector?  In one of the clients plant, the cost object distributes the labor base on production receipts to stock. So if nothing was  compl

  • OWSM - Signing element using XPATH Expression

    Hi, We have a requirement to sign an element within outgoing body of xml message. We are trying to use the policy pipeline to sign. Signed Content: XPATH sign XPATH Expression: referencing the element required to be signed. We get the error: WS-Secur