How do i clear error code NSURLErrorDomain error 1102

While trying to install a new update, I get this error message:
(NSURLErrorDomain error - 1102.)(102).
Any suggestions on how to clear it?

Hello, are you really on 10.8.2 still?
Might be Apple's overloaded servers...
https://discussions.apple.com/message/23011659#23011659
Couple of other things to try...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Similar Messages

HT5568 Can't update: error code (NSURLErrorDomain error -3001.)(102)

Running Mountain Lion 10.8.2 but when I click on the update for Safari to 6.0.2 I get the error code (NSURLErrorDomain error -3001.)(102)
Any suggestions please?

Use this link to download. It works just fine then:
http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

HT1338 Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?

Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?
Thank you, best regards
Sergey

Several users are reporting a server problem with Software Update. Why not wait and try again later today or tomorrow to see if the problem is resolved.
If the problem is on your computer then give this a try:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

How to fix iphone 4 code 10 error wont connect to itunes

how to fix iphone 4 code 10 error & wont connect to itunes

Either force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Or, login to iCloud.com, locate the phone, then erase it.
Either method will remove the passcode.

Error code -22: Error while registering

Hi Guys.
I'm new to NW Mobile 7.1.
I'm able to run developed applications and see data on physical devices (PDAs).
I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
After a sync, the folowing messages appear on my console:
Windows XP
messageReceived in ContainerSyncEventListener: Connected to the server   Level: 1
messageReceived in ContainerSyncEventListener: Sending logon data to server   Level: 1
messageReceived in ContainerSyncEventListener: Waiting for response from server   Level: 1
messageReceived in ContainerSyncEventListener: Receiving data from server   Level: 1
messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
In just a few words, it is driving me nuts.
Thank you in advance,
David.

Hi,
if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
Hope this helps!
Regards,
Oliver

Error report (NSURLErrorDomain error -1012.)

when I share a video from Final Cut Pro to Vimeo it fails and generates an error report (NSURLErrorDomain error -1012.). What does this mean and how can I resolve this?

Triple-click anywhere in the line below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
Post any lines of output that appear below what you entered — the text, please, not a screenshot.

ABAP Client Proxy error code: 401, error text: Unauthorized

Hi,
I have Client proxy in ECC for oubound interface in PI 7.0, when i look into SXMB_MONI of ECC i can see my message with Error "HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)".
As per few thread i already assign SAP_XI_APPL_SERV_USER role to PIAPPLUSER in ECC, still i am getting same eror.
I do not understand how this Proxy communication work, which ECC user will be use in communication and how this communcation link to RFC destination "SAP_PROXY_ESR" type G. Even i can not see type H in ECC so i created RFC destination of type G.
With Regards
Sunil

We were able to get it working by making a change in the Integration Engine Configuration (in sxmb_adm).
Changed "Corresponding Integ. Server" from "http://<server>:<port>/sap/xi/engine?type=entry"
to "dest://RFCdestinationName"

Error code:-2147217401 Error code name:agentTimeout

Hi,
We are getting the below error
ReportSDKException Occurred com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Server agent has timed out.---- Error code:-2147217401 Error code name:agentTimeout
while adding SQL to crystal report for few cases (more time consuming reports) . i.e.
reportClientDocument.getDatabaseController().addTable(boNewCommandTable, null);
what could be the reason for the same? Is there any maximum time limit for the addTable() method execution, If so how can we change that?
Thanks & Regards
Amitav

Hi Adam,
Actually we are trying to add an SQL query to the report and we know that the particular SQL supposed to take more time for execution. Our application logs indicate that the agentTimeout error comes approximately after 6 hrs. We are wondering if there is some maximum time limit then will it possible to change the same.
Thanks & Regards
Amitav

Error code: HTTP_RESP_STATUS_CODE_NOT_OK error text: HTTP response contain

Hi Gurus
I got this error in Alert monitoring please any one can guide me how can i resove this...
Error code: HTTP_RESP_STATUS_CODE_NOT_OK error text: HTTP response contains status code 500 with the descri
Thanks

Hi Mohana,
the major reason would be an internal access with pwd aunthentication
Error: 500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Thanx
Sampath

ERROR OGG-00868 Error code 1291, error message: ORA-01291: missing logfile

OGG Version 12.1.2.1.0 OGGCORE_12.1.2.1.
DB : 11.2.0.4.3
I am getting below error.
2014-12-31 09:53:09 ERROR   OGG-00868 Error code 1291, error message: ORA-01291: missing logfile
(Missing Log File <unknown>. Read Position SCN: 2585.802983323 (11103293443483)).
Our solution uses ADG and OGG
We have source and target where ADG was setup . We later broke ADG setup and made Oracle DB's in source and target into standalone.
As part of our solution during our deployment window ,we would break ADG i.e we would make both the source and target as independent DB’s with PRIMARY Read /Write mode.
-Take Guaranteed restore point on Source DB so that we can flash back at later stage(so of now we have not executed flash back command)
-Once ADG config is disabled we will start the OGG extract which is already configured before =We are at this stage where we are hit with errors and extract is not starting .

Hi ,
The error shows it is waiting for the Logfile. The Integrated extract mainly needs of the availability of two things.
1. Archivelogs.
2. Trail Files.
Both should be retained to the needed / required level.
Please execute the below query and check the status of the Extract / Capture process.
The below query displays the information of each capture process in a database.,
COLUMN CAPTURE_NAME HEADING 'Capture|Name' FORMAT A7
COLUMN PROCESS_NAME HEADING 'Capture|Process|Number' FORMAT A7
COLUMN SID HEADING 'Session|ID' FORMAT 9999
COLUMN SERIAL# HEADING 'Session|Serial|Number' FORMAT 9999
COLUMN STATE HEADING 'State' FORMAT A20
COLUMN TOTAL_MESSAGES_CAPTURED HEADING 'Redo|Entries|Evaluated|In Detail' FORMAT 9999999
COLUMN TOTAL_MESSAGES_ENQUEUED HEADING 'Total|LCRs|Enqueued' FORMAT 9999999999
SELECT c.CAPTURE_NAME,
       SUBSTR(s.PROGRAM,INSTR(s.PROGRAM,'(')+1,4) PROCESS_NAME,
       c.SID,
       c.SERIAL#,
       c.STATE,
       c.TOTAL_MESSAGES_CAPTURED,
       c.TOTAL_MESSAGES_ENQUEUED
FROM V$STREAMS_CAPTURE c, V$SESSION s
WHERE c.SID = s.SID AND
        c.SERIAL# = s.SERIAL#;
Also run this query to check, if the capture is waiting for which logfile.,
COLUMN CONSUMER_NAME HEADING 'Capture|Process|Name' FORMAT A15
COLUMN SOURCE_DATABASE HEADING 'Source|Database' FORMAT A10
COLUMN SEQUENCE# HEADING 'Sequence|Number' FORMAT 99999
COLUMN NAME HEADING 'Required|Archived Redo Log|File Name' FORMAT A40
SELECT r.CONSUMER_NAME,
       r.SOURCE_DATABASE,
       r.SEQUENCE#,
       r.NAME
FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
WHERE r.CONSUMER_NAME = c.CAPTURE_NAME AND
        r.NEXT_SCN      >= c.REQUIRED_CHECKPOINT_SCN;
The above query clearly shows for which logfile the Extract / Capture process is waiting. Check if that logfile is available in your system.
Regards,
Veera

Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0

Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
Sandesh

HI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.

I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek.

Report App Server;Error code:-2147215349 Error code name:docNotReady.......

Hi Experts,
In our application we are trying to connect to the RAS server for the ad hoc reporting capabilities that allow users to modify reports over the Web.
In order to do this what are servers need to run on the server side( I am looking for settings on server side like, what are the servers and services to be run on).
When we try to open the document we are getting the error. The code and error msg are as follows.
private void GetReportClientDocument()
          try {
               sessionManager = CrystalEnterprise.getSessionMgr();
               enterpriseSession = sessionManager.logon(username,password, servername, "SecEnterprise");
               iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
               String sampleReportName = "Test_Open";
               IInfoObjects infolist = iStore.query("Select SI_CUID From CI_INFOOBJECTS Where SI_NAME='" + sampleReportName + "' and SI_INSTANCE=0");
               int lookUpId = 0;
               for (int i = 0; i < infolist.size(); i++) {
                    IInfoObject siId = (IInfoObject) infolist.get(i);
                    lookUpId = siId.getID();
               System.out.println("The CUID is: "+lookUpId);
               IInfoObjects list = iStore.query("select * From CI_INFOOBJECTS Where SI_ID="+lookUpId);
               IInfoObject report = (IInfoObject) list.get(0);
               ReportClientDocument rcd = new ReportClientDocument();
               IReportAppFactory appFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
               try {
                    System.out.println("Name of Document: "+rcd.getReportDocument().getName());
                    rcd = appFactory.openDocument(report, OpenReportOptions._openAsReadOnly,null);
               } catch (ReportSDKException e) {
                    e.printStackTrace();
          } catch (SDKException e) {
               e.printStackTrace();
Error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException: The document has not been opened.---- Error code:-2147215349 Error code name:docNotReady
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException.throwReportSDKClientDocException(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDatabaseController(Unknown Source)
     at Viewer.GetReportClientDocument(Viewer.java:98)
     at Viewer.main(Viewer.java:27)
Thanks in advance for your help.

Hi Qiang,
Please check http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=1047650.6 for possible solutions for this error.
Thanks,
Erik

The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

Friends,
I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
Any suggestions would be very helpful.
Thanks in Advance,
Bharath

Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
These errors come for various errors and tracing RAS would give us a better idea.
It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
Thanks,
Prithvi

How do i clear error code NSURLErrorDomain error 1102

Similar Messages

Maybe you are looking for