How do I clear the Code Mask in the WBS Code Definition box?

Hi all, I made a boo-boo when trying to set up a WBS code definition, and I can't figure out how to delete the codes masks as shown below. DEL does not work on the level rows and there is no "None" choice in the dropdown. Well, as always,
thx for your help!
Jigs
Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

Ismet, thx for helping, but that procedure does not work here. Trying to delete the last line in the code mask gives this error:
and results in this list and an enless loop of the same message until I just hit cancel. This has the feel of a bug. I am using the latest of everything (MS Project 2013 Std. 32-bit in Win 8.1 Pro with all the MS updates). Driving me bonkers :)
Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

Similar Messages

I bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

Hi, I am trying to download IOS7 to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hi, I am trying to download IOS7 (not sure if it's 1 or 2) to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hello Den53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430?viewlocale=en_US
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
Best of luck,
Mario

How do you clear a message that is stuck in your forward box?

How do you clear a message that is stuck in your forward box?

Educatedlady wrote:
How do you clear a message that is stuck in your forward box?
Try This...
Close All Open Apps... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How to use multiple patterns for masking/format the input text

Hi All,
I am using Jdeveloper 11.1.1.5 and i have a requirement where i need to format my input Text value in these below patterns:-
Format
Example
AA9A 9AA
EC1A 1BB
A9A 9AA
W1A 1HQ
A9 9AA
M1 1AA
B33 8TH
A99 9AA
AA9 9AA
CR2 6XH
DN55 1PT
AA99 9AA
For Example :- If user puts value as EC1A1BB, it should automatically changed to EC1A 1BB
if user puts value as W1A1HQ, it should be automatically changed to W1A 1HQ and so on..
If it could have been one format , i might have followed this :- https://blogs.oracle.com/jdevotnharvest/entry/get_social_security_numbers_right
But for multiple patterns i am not able to get through to the proper solution.
Is there any way to achieve this ? Please suggest.
Regards,
Shah

For the validation you should be able to use one regular expression where you add the logical or (|) (check the doc http://docs.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html) between the groups. If none of the patterns matches you have an error.
For the for formatting I'm not sure you can use only one expression.
I suggest to write one method which does the checking on and the formatting may be using an array of patterns to check and iterate the patterns in a loop. Once you found a match you can read the needed format from another array (or an other dimension if you prefer to use a multidimensional array).
Timo

Increase the coding Mask of the WBS

Hi SAP Experts,
My client would like to increase the WBS levels , as currently we have configured the code mask with only four level along with project definition (XX-0000000.00.00.00.00) , we need to add two levels more like (XX-0000000.00.00.00.00.00.00).
Is there any way to change the coding mask without any impact of the existing data .
Thanks

Thanks again,
I have added one more level to the existing mask to complete the mask with 24 char. like this (XX-0000000.00.00.00.00.0) , a new message appearing (Cannot make this change to the editing mask ) .. ??
Is there any way to change the current mask with one more numeric level .
Waiting for your reply
Thanks

The subnet mask on the Extreme isn't the same as on the Express.

Dear Group,
I have my Extreme configured to do PPPoE and DHCP and my DSL modem is setup as bridged. Everything is finally working well. I have an Express extending the Extreme in a WDS.
When I look at the PPPoE tab in the Internet tab of the Extreme in AirPort Utility it shows a subnet mask of 255.255.255.255, but the Internet tab of the Express shows 255.255.255.0.
I don't have any problems at all and wireless clients are connected to the Extreme and the Express.
Is the Extreme's subnet mask part of my DSL connection and therefore a different subnet mask?
Not sure, but I'd like to make sure that I don't have something setup incorrectly.
Thanks,
Frank

This really isn't an issue as long as the AirPort Extreme base station (AEBS) is providing a working Internet connection. Since the AEBS is using PPPoE to connect to your ISP I'm not sure that the subnet mask is even used.
The subnet value of 255.255.255.0 used by the AirPort Express (AX) is typical.

How do I clear apps after double-tapping the home button?

This is in relation to iOS 7.

I found the answer here: http://ios.wonderhowto.com/how-to/completely-close-out-running-applications-ipho ne-ios-7-save-battery-0147375/
you still double tap the home button. There is a preview screen above the programs icon. swipe up, and the app is removed.

How do I clear an error message when the buttons available do not work?

I have an error message that says 'cannot verify server identity' and when it asks me to continue or cancel or details, well when I push the buttons nothing happens. I cant clear the message and my iPad is virtually useless. Can someone help figure out what I'm supposed to.

Try a reset and see if it works properly after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How do I clear application level item of the last value it held?

See next post - I oopsed the first try.
Edited by: user3034406 on Jul 28, 2009 1:48 PM

Using oracle 11g, apex version 3.0.
Ok, so I am developing a survey with questions and their related answers (either radio group or checkbox depending). I have it set up so that when a user clicks a checkbox, an apex_collection is updated. In the pl/sql of my region source, I left outer join to this collection to display the checkbox as checked when its value is found in the collection. Using this same strategy, I can delete a value from the collection when a user uncheckes a box....
The problem I am having is this: the very last value that a user checks initially (i.e. takes checkbox from unchecked to checked status) is staying in my application level item :ADD_THIS, so when the page is refreshed or whatever, this value gets added to my collection, which means it shows as checked. Well, I think this is what is happenig...!
I have tried setting the app level item to null in a computation process, but this screwed everything up and nothing would work right....
So, if someone knows when, how and where to reset an app level item?
NOTE: I barely know javascript (getting the hang of simple stuff but I have a long way to go!) and am a little shaky on things like session state, before load, after load, etc., etc, when it comes to apex. Please be patient with me! (smile)
Here's what's going on script wise:
PL/SQL in region source of page: builds list of questions and their associated answers
DECLARE
#####stuff here####
CURSOR multiple_answer_cur IS select apex_item.checkbox(1, nvl(a.c001, a.answer_seq),'onclick="f_updateMember(q_seq, a_seq);"', a.c001, null, v_q_seq) cbox, a.answer_text, qa.question_seq, a.answer_seq
*<etc. etc....>*
CURSOR single_answer_cur IS select apex_item.radiogroup(radio_global, nvl(a.c001, a.answer_seq),a.c001, null, null, null, 'f_updateMember(q_seq, a_seq)',null, v_q_seq) rgroup, a.answer_text, qa.question_seq, a.answer_seq
*<etc. etc....>*
BEGIN
####stuff here that builds survey and writes it using HTP. to page####
END;
Javascript function to add or delete from collection (in header of page)
function f_updateMember(q_seq, a_seq){
--determine if value represents checked or unchecked box
var isString = /q|a/;
var getThis = document.getElementById(q_seq).value;
var findinValue = getThis.search(isString);
var getaddthis = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=AddCheckboxValue',0);
var getdelthis = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=DelCheckboxValue',0);
--onclick, if an 'a' or 'q' is found in value, this box is in the collection and therefore checked, so delete it
if (findinValue != -1) {
getdelthis.add('DELETE_THIS', "q"+q_seq+"a"+ a_seq);
getdelthis.GetAsync(function(){return;});
getdelthis = null;
}else{
--onclick, no 'a' or 'q' is found in value, this box is not in the collection, so add it
getaddthis.add('ADD_THIS',"q"+q_seq+"a"+ a_seq);
getaddthis.GetAsync(function(){return;});
getaddthis = null;
Snippet of page source
<b>Question number one</b>
<input type="checkbox" name="f01" value="q78a489" checked="checked" onclick="f_updateMember(78,
489)" id="78" />Answer option one for question one>
<b>Question number two</b>
<input type="checkbox" name="f01" value="483" onclick="f_updateMember(77, 483)" id="77" />Answer
option one for question two>
Edited by: user3034406 on Jul 28, 2009 12:18 PM

How to restore cleared/ignored alerts back to the alert list?

Thank you for your quick response and helpful thread :) I was told that members of the Spiceworks community responded really quickly but I didn't know it would be this quick!! Thanks again, I'm excited to be part of Spiceworks.

Take a look at this thread http://community.spiceworks.com/topic/1059931-resending-old-alerts
Welcome to the community btw..

I have an error 0xc18a0306 on my C6280 printer. How can I clear it?

I have an error 0xc18a0306 on my C6280. I have tried switching it off and back on and removing and replacing the ink cartridges. It still wont print and comes up with the same error message. How can I clear it?

If resetting the C6280 did not fix the error code then it will have to be serviced or replaced.This link provides some info on your error code.

How do I replace one vector mask with another?

I have a template for a web site that I'm trying to figure out as I learn CS5. The template has a vector mask created out of some writing that was converted into an object/vector mask. I would like to replace with a layer I created that has different writing in it. How would I replace the vector mask in the template with the new object I created?
Thanks for any help you can give.
Best -- Catherine

• In the Layers Panel draw the Layer’s Vector Mask icon onto the trashcan-icon
• move that Layer above the new Text Layer
• invoke Create Clipping Mask (command-alt-G) from Layers Panel’s fly-out menu or alt-click on the line separating the two Layers’ icons

Project code mask problem

Dear All,
Presently we use project codes as " H.00.HXX.000.00.00.00.00 "
Now we have created project upto series H.08.HXX.999.
We are unable to create H.08.CXX.1000 or further.
Now I tried to change the coding mask in the config by changing H.08.HXX.000 to H.08.HXX.0000 , but the system is not allowing the same.
Please suggest me on this matter.
Regards,
Vishal

Hi,
Thanks for the reply.
I think what u have suggested is right.
But still I am looking for possibility of the same.
May be OSS note could of some help.
Thanks again.
Regards,
Vishal

How do you inverse a clipping mask

I'm working on a tshirt and can only use 3 colors (Green, Black and Yellow). If you look at the attached image, I need to make the brown color that is inside of the squirrel mask out the items behind it (corn stalks, rectangle and part of the "R" in "Corn Maze". The tshirt will be grey so once the Clipping Mask is applied, it will allow the grey tshirt to become the color for the squirrel.
The problem I'm running into is if I duplicate the squirrel and use him as a clipping mask, it does the opposite of what I'm trying to accomplish. I need to mask out everything inside the squirrel, not everything outside the squirrel. In photoshop, I could just inverse the selection. Not sure how to inverse a Clipping Mask.
Any help would be greatly appreciated.

[scott w] wrote:
Monika Gause wrote:
Then it would be about how I would pronounce it, anyway ;-)
Wouldn't that W sound like a V?
In German: yes. But non when I#m trying the skquawirrrrrel in English ;-)
@Students:
Everything needs to be grouped:
For just the squirrel (not its nose or other details) you set the fill to opacity 0
Sorry for the German panels:
Aussehen = Appearance
Ebenen = Layers

How do I clear the Code Mask in the WBS Code Definition box?

Similar Messages

Maybe you are looking for