How do I clone the console in dual monitors with a nvidia videocard?

Hi,
I have two TFT monitors, one of 24" with a HDMI/DVI input and another of 17" with a VGA input. My nVIDIA videocard only has a DVI output (primary) and a HDMI output (secondary), so I'm forced to use the 17" monitor as primary until I hit the X server.
The thing is that with an Archlinux fresh install I get the console cloned on both monitors, which is great, but once I install the nvidia propietary module (my guess is that it happens because of it) I only get the console on one monitor (the primary monitor, the one of 17").
So, how can I get back the console cloned on both monitors?
Thanks,
- Johan

Use the open-source driver. Oh, but you lose things like hardware 3D acceleration....
The nvidia binary doesn't focus on ttys at all (for ages and ages you couldn't even get to the TTYs if you had started X up, with some nvidia cards).

Similar Messages

How do you clone the install disk?

i was reading in another post about installing the OS over a network and the solution given was to install to an Ext. Firewire drive and clone the installed OS to the firewire drive then clone it again onto the target mac.
this solution may not work well for me, but i too was considering a family user license to update as many of my macs as i can. However, i want to wait until the next version of the OS is available. (i see no point in buying an OS i already own on one computer for another $199, so i will wait).
the other thread offered up two solutions. one was to have a, if i understand it correctly, i network version of the OS (X server), and the other was as posted above.
so how do yo clone the OS (i assume it is the actual installed OS and not the installer. how much room is needed to do it?

yes, thank you i see that.
i don't know much about servers, but it kind of sounds like i would be running the OS from a server and not the individual macs. i don't think that will work for me either.
it sounds like i will need to by the multi-license then exchange the DVDs for CDs so i can install on the G4 DP 533.
i could use the clone method, but the mac isn't really a clone, they have their own identities in mutlti-user log in.

URGENT HELP How Can I clone the database only?

Hi all
I have two database, oracle9.2.0.6 running on RHEL4
one is testing server and the other for the production server
how can i clone the testing DATABSE on the productioin DATABASE?
please help me urgent
Thank You
Regards

Hello Tawfik,
You can use RMAN duplicate with the following link for 9i.
http://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php
If you want to clone manually then follow this thread
Cloning 9i database manually

How do i clear the console

Hi Experts
I need to know "how do i clear the console " and
"how do position the mouse cursor in x and y coorditates in a console "
Thanks in advance

You don't. Or, it depends on the console. Depending on your point of view.
Java doesn't directly control it the same way that it controls an AWT window for example. It just sends bytes to it. If the console is capable of interpreting bytes in such a way to clear the screen, then it can.
Most consoles a person is likely to use will interpret VT100 commands. Look them up; try google. You can just output those commands and the console will do what they say, hopefully.
Sending a control-L (bye 0x0c, I think) may do it. Try that.
Or you can try the java curses library.
All this may be wrong if you mean something by "console" other than what I think you mean.

HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

Hi rationale1,
Welcome to the Support Communities!
The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
The link below will explain the Dolby Digital parameters and options in Compressor 4. You may need to research a different DVD authoring software to achieve your desired result.
Dolby Digital - Compressor 4 User Manual
http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
Dolby Digital
The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format.
Note: All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
Tip: For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
Cheers,
Judy

How can I sync the contacts in my phone with those on my MacBook Pro? I already have an iCloud account, and everything else (calendars,music, etc.I is already synched) but the contacts won't.

How can I sync the contacts in my phone with those on my MacBook Pro? I already have an iCloud account, and everything else (calendars,music, etc.I is already synched) but the contacts won't.

Ok.
Open System Preferences, Apple Logo icon in the menu bar and then System Preferences or the Sys Pref iocon in the Dock and go to the Internet Accounts area and look at your iCloud account. It should list what is and isn't synced by a checkmark next to each item.
Also in the Contacts app click on Contacts in the menu bar and select Preferences then accounts and make sure your iCloud account is listed. You can also do that from the Internet Accounts area in System Preferences.

HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.

I recently removed an outlook account and now all of my calendar events are missing. The majority of them were added from my iphone 4s. How do I retrieve the events? Backing up with iCloud did not help, as I assumed it would.

I recently removed an outlook account and now all of my calendar events are missing. The majority of them were added from my iphone 4s. How do I retrieve the events? Backing up with iCloud did not help, as I assumed it would.

Outlook is a mail client for PC's (and Macs). It is not a type of account. Do you mean an "Exchange Account"?
If so, then re-add it. The calendar events live on the Exchange Server. The only way to get them back is to re-add the account to the phone. The contents of Exchange and IMAP accounts are not part of the 'backup' as they already exist elsewhere.

How do I share the music of my library with another account on same computer

how do I share the music of my library with another account on same computer

How to share music between different accounts on a single computer

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

Take a look at HeadRoom (headphone.com). It's a fabulous resource for all types of headphones, with great guides and useful reviews.
http://www.headphone.com/

Does Apple make a monitor that looks like the iMac27, for dual monitor setup?

I'm thinking about buying an iMac, but I'm used to a multiple monitor setup. Does Apple make a monitor that looks like the iMac27, for dual monitor setup?

Look at these links.
http://store.apple.com/us/product/MC914LL/B/apple-thunderbolt-display-27-inch?fn ode=53
http://store.apple.com/us/product/MC007LL/A/apple-led-cinema-display-(27%22-flat -panel)?fnode=53
Allan

How do i set the iphone to auto sync with the mac book pro

how do i set the iphone to auto sync with the mac book pro?

Iphone Sync Support wrote:
Thanks but this is not what I am looking for. I am looking for the settings - setting that allows our iphone to auto sync with your mac book when you make a puchase on either device.
You aren't going to sync with my MacBook when I make a purchase.
And you are not going to autosync your iPod with the MacBook unless you tell it to sync or plug it in.
You can enable Automatic downloads when you make a purchase.
iTunes settings > Store.
When you make a purchase, it will automatically download that purchase to devices set up the same way.
This is not the same as autosyncing your device to your computer (as you first asked).

How do I "see" the AF point I choose with a Nikon D700/D3?

How do I "see" the AF point I choose with a Nikon D700/D3?
I hear a D3s and LR3.3 can see it.
AND, how do I turn it ON/OFF ?
HG

I was told by a D3s user that in LRv3.3   AF point used is shown
Seem to remember for some earlier version of LR   my e510 or e30 AF points was being shown.
My guess is you would only start looking at the AF points used ... when a Lens or body starts acting differently. or when it is not working as well as other gear you are using.
As my only   RAW software used ... I would like it to READ what is there in the Exif.
at least
AF distance (which was there in LRv2)
Shutter count (there in PS CS5)
and AF point used ... there in Aperture 3   ... and Nikon software.
Because LR s/b a PRO workflow software ... support for the Current PRO cameras should be expected    ... and that number is far LESS.
and for Nikon users it is D700/D3 series.    basically two cameras ... because my guess is the different flavors D3/D3s/D3x   of the one body , the reading of the AF point sb simular.
HG

How can i get the "Do recursive listing.vi" with teh sub-vi, because my is lost???

How can i get the "Do recursive listing.vi" with the sub-vi, because my is lost???
THX

I think you must be using LV 8.x...
Do a LabVIEW repair to get it back or else, use the attached one.
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
Recursive File List.vi ‏33 KB

How do I clone the console in dual monitors with a nvidia videocard?

Similar Messages

Maybe you are looking for