How do i close excel.exe in order to install Acrobat XI Pro? Thanks!

I dont have any application opened, even though the Adobe Application Manager still asks to close excel.exe in order to continue installing the Acrobat XI Pro trial version. How do i solve this? Thanks in advance!

It appears that Excel did not close properly. You will have to kill the process using the Task Manager.

Similar Messages

How do I close Mozilla Firefox in order to instal an update of Adobe Flash Player?

I installed FF very recently at the recommendation of Blue Mountain.com as I was unable to send their e-cards with messages. Now I'm trying to update Adobe Flash Player and cannot do so because of the message 'close Moxilla Firefox to continue'. I've tried but have not been successful. Can you please help me? Thank you.

To close Firefox, in the menus select "File > Exit", you can start Firefox by using the same shortcut that you used to open Firefox originally.
I would ignore the instructions from Adobe. Adobe uses its own download manager but it is not required. All you need to do to install Adobe Flash is download the Adobe Flash manual installer and run it. For details on doing that see the Adobe troubleshooting article - http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

When I try to download acrobat xi pro it tells me to first close excel.exe, however, I don't see anything open. what is the problem?

when I try to download acrobat xi pro it tells me to first close excel.exe, however, I don't see anything open. what is the problem?

Hi,
Did you check the task manager on your computer.
Thank You

How to stop the bridge.exe active as to install the new application eg.Flash CC?

how to stop the bridge.exe active as to install the new application eg.Flash CC? please help?
I can't install the any new application every time.

Please refer:
http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
Regards,
Ashutosh

How to install Acrobat XI pro silently via specific language

Hi;
We sold many acrobat XI pro license, our native language is Turkish but most of our program which is used in our company installation language is English and we want to install Acrobat XI pro via English language setting and we deploy to our client computer via silent installation parameters. in acrobat XI pro silent installation we used Customization Wizard from Adobe and we could not set acorbat XI pro interface language to English. how do we can set Acrobat XI pro installation language to English.

Hi jairolasdkjcvxm,
Please see this knowledgebase article: Installation Prompt to Close SafariNotificati
It should be a pretty easy fix, but please let us know if you're still running into snags.
Best,
Sara

How do I add a negative to a calculation in Acrobat 10 Pro?

How do I add a negative to a calculation in Acrobat 10 Pro?
I am using Acrobat 10 Pro in Windows 7.
I have a form with columns of numbers (Millions, Thousands, hundreds) that I concatenate and then perform simple calculations on (addition, subtraction, division, etc).
I have a new section of the form that has a column for a negative sign. The calculation is simple addition but it is possible for the numbers to be negative as symbolized by the minus sign in the negative column:
Line 23 adds lines 20 + 21 + 22 and displays the sum. If any of lines 20-22 have the minus sign in the Neg column, I need the calculation to see that and add the negative number, essentially subtracting it.
NOTE: the neg column is so formatted that the only possible entries are null and "-"
So, I see two ways to go, one is a script for each line that looks at the neg column and if the "-" is present, makes the entry a negative number. I have not had much luck with this.
The other path is to do this all in the calculation in line 23. I have fiddled around with some "if" statements but no joy yet.
NOTE: If it makes it easier, I could change the column input to a drop-down box with "-" or null as the options if that makes it easier to call out somehow.
any thoughts out there?
Steve

You can use a custom JavaScirpt calculation or the simplified field nation calculation, if your field names follow the required convention, with the "-" operator.
If you are using the "The field is the ____ of the following fields:", you need to create a hidden field with a default value of "-1", a second hidden field that calculated the product of the "-1" field and the field you want to subtract. You can then use that second hidden field in the calculation.

How to check the resolution of a pdf file using Acrobat 9 pro?

How to check the resolution of a pdf file using Acrobat 9 pro?

PDF files don't have one resolution, but may have none or many different resolutions, one per image. You can check the maximum/minimum resoluion with preflight in Acrobat Pro, but not in Adobe Reader.

Recently installed Acrobat XI pro on Windows 8.1, won't let me feed into scanner, forces me to scan pages one by one, how do I solve this?

I recently installed acrobat xi pro on windows 8.1. When I try to scan to create a pdf, it won't feed, instead it directs me to custom page and makes me create page by page. It's not a problem with my computer. How can I solve this? JK in Houston

Hi jk in texas,
Since you're using Acrobat on Windows, you can set up a scanning preset that uses the scanner's TWAIN driver. When the automatic document feeder is loaded, use the preset to have Acrobat "talk" to the scanner. For information about setting up presets, see Acrobat Help | Scan documents to PDF.
Please let us know how it goes.
Best,
Sara

How can I copy and paste text into Word in Acrobat 9 Pro

How can I copy and paste text into Word from Acrobat 9 Pro?

You might find it easier to export the file to Word under File > Export > Word in Acrobat 9.

#1 i'm having trouble installing acrobat 9 pro in a macbook pro. #2 how to convert to searchable d

#1 i'm having trouble installing acrobat 9 pro in a macbook pro. #2 how to convert to a scan to a searchable and cut/paste doc.?

Hi feivey, what is the trouble you having while installing ?
Please explain the issue in more detail

I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?

How do I get Acrobat XI pro on a Mac to work fully, and not just act like Acrobat Reader. i just paid and downloaded it, entered new serial number when requested, but when I open a .pdf I have no pro features showing (such as editing tools, convert to powerpoint, etc). I use XI pro on a windows PC and have no problem there.

Perfect answer. And I feel a bit dumb (should have worked it out, but still finding my way round the Mac). Many thansk for the help.
From: Test Screen Name <[email protected]>
To: John Spencer <[email protected]>
Sent: Saturday, 1 November 2014, 20:20
Subject: I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
created by Test Screen Name in Acrobat Installation & Update Issues - View the full discussionYou probably still have Adobe Reader on the system. Be sure to run Acrobat instead. Use Launch Pad. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6889718#6889718 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to disable the internet explorer 9 automaticly installation when installing Acrobat XI Pro

Hi,
I do have a Win7 WS with IE8 (and I dont want to upgrade to Internet Explorer 9). When I do install Acrobat XI Pro, automaticly IE 9 will be also installed. How can I stop this?

Acrobat installers do not install other products.
Ben

How many hours will it take me to download adobe acrobat XI Pro (English) free trial?

how many hours will it take me to download adobe acrobat XI Pro (English) free trial?

Hi tanadmin1,
Acrobat XI Trial is of Appox. 500 MB and download depends on the speed of network.
You can use the below link to download Acrobat XI.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us

Trying to install Acrobat XI Pro. On my Mac, I get the message, "Please close the following applications to continue: - Safari. Safari is closed, but I can't get past this screen. Each time I click "Retry", the message reappears.

I am trying to install Acrobat XI Pro. On my Mac, I get the message, "Please close the following applications to continue: - Safari. Safari is closed, but I can't get past this screen. Each time I click "Retry", the message reappears.

TErminate the processes in activity monitor an/ or configure Safari tomnot use the quick launcher and automatic update check so that those processes aren't used to begin with.
Mylenium

How Can I Kill Excel.exe Process After finish my Execution of SSIS Package in Sqlserver2008r2

Hi !,
am new for c# and SSIS Package Creation , I am Trying to Read Excel file, and load the value into Sqlserver using SSIS package . My Problem is , After Execution of SSIS package Still Running EXCEL.exe Process in my server. i need to
kill that process . I post my Code Exactly where am release my excel file object , please guide me where am going to wrong?
Server Configuration
OS:windows7
SqlServer :2008r2
Framework:3.5
please give me some suggestion to correct my error .
Here is My Code:
Microsoft.Office.Interop.Excel.Application xlApp;
Microsoft.Office.Interop.Excel.Workbook xlWorkBook;
Microsoft.Office.Interop.Excel.Worksheet xlWorkSheet;
var missing = System.Reflection.Missing.Value;
xlApp = new Microsoft.Office.Interop.Excel.Application();
xlWorkBook = xlApp.Workbooks.Open(filename, false, true, missing, missing, missing, true, Microsoft.Office.Interop.Excel.XlPlatform.xlWindows, '\t', false, false, 0, false, true, 0);
xlWorkSheet = (Microsoft.Office.Interop.Excel.Worksheet)xlWorkBook.Worksheets.get_Item(1);
Microsoft.Office.Interop.Excel.Range xlRange = xlWorkSheet.UsedRange;
Array myValues = (Array)xlRange.Cells.Value2;
int vertical = myValues.GetLength(0);
int horizontal = myValues.GetLength(1);
System.Data.DataTable dt = new System.Data.DataTable();
bool isNameRead = false;
// get header information
for (int i = 1; i <= horizontal; i++)
string cellValue1 = "";
object cellObj = myValues.GetValue(1, i);
if (cellObj != null)
cellValue1 = myValues.GetValue(1, i).ToString();
if (cellValue1 == "Name")
if (!isNameRead)
dt.Columns.Add(new DataColumn(cellValue1));
isNameRead = true;
else
dt.Columns.Add(new DataColumn(cellValue1 + 1));
isNameRead = false;
else
dt.Columns.Add(new DataColumn(cellValue1));
// Get the row information
for (int a = 2; a <= vertical; a++)
//string cellrowvalue = "";
string isemt = "";
object[] poop = new object[horizontal];
for (int b = 1; b <= horizontal; b++)
isemt =(string) myValues.GetValue(a, b);
if (isemt != null)
poop[b - 1] = myValues.GetValue(a, b);
DataRow row = dt.NewRow();
row.ItemArray = poop;
dt.Rows.Add(row);
xlWorkBook.Close(true, missing, missing);
xlApp.Quit();
releaseObject(xlWorkSheet);
releaseObject(xlWorkBook);
releaseObject(xlApp);
return dt;
releaseObject
private void releaseObject(object obj)
try
System.Runtime.InteropServices.Marshal.ReleaseComObject(obj);
obj = null;
catch (Exception ex)
obj = null;
MessageBox.Show("Unable to release the Object " + ex.ToString());
finally
GC.Collect();
GC.WaitForPendingFinalizers();
GC.Collect();
GC.WaitForPendingFinalizers();
Thanks
Parthasarathi Purushothaman

Why are you programmatically opening an Excel sheet in C# instead of using the DataFlow task with an Excel input?
Since your task is programmatically starting Excel via "new Microsoft.Office.Interop.Excel.Application();", it is your responsibility to stop it.
Please see "Quit":
http://msdn.microsoft.com/en-us/library/microsoft.office.interop.excel._application.quit(v=office.15).aspx

How do i close excel.exe in order to install Acrobat XI Pro? Thanks!

Similar Messages

Maybe you are looking for