How do I close iPhoto if it says iPhoto can not close because it is still uploading photos into photo library?
Because I can not close iPhoto I can not update my comuter because my computer can not restart.
Disable Photo Stream in the iCloud preference pane.
Similar Messages
-
i just updated my mac and when i went to open iphoto it says it "can not open because of a problem" how do i fix this?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
close Firefox, restart it says firefox can not start - already running, tried deleting the parent.lock it doesn't exist. I try to turn off my computer it says WidgiBho needs to close, I tell it to close but computer never shuts down
Did you try to wait a bit longer before restarting Firefox to give Firefox more time to close down completely?
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs -
I upgraded my old mac to snow lepord and now when i try to play music in my i tunes it says "file can not be located" but it still lists all of my music
Use Spotlight Search (the magnifying glass on the top right-hand corner of your menu bar) to locate your music files. Then point iTunes to those files.
-
Every time I connect my iPhone to iTunes on my mac it alwasys says iPhone can not sync because sync session failed to start. What do I do to fix this problem?(It's an iPhone 4s with the latest IOS 7.0.2
bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone. -
When I plug my ipad into the computer to sync a message pops up saying that the ipad can not sync because there is not enough memory on the itunes library. Do I need to increase the itunes library memory and how do I do this, or do I just need to trasnfer things out of itunes? Thanks.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
When I go to close IPhoto a window pops up saying "importing photos to library can't close". I can't turn off the Mac either. How do I fix this? There's no photos in IPhoto and I don't know what it's importing.
force quit (right click on the iPhoto icon in the dock and select force quit)
LN -
I have had several computers in recent years and when i try to sync my iphone and ipad to my new computer, it says it cant because the devices are registered on too many computers. I only need them synced up to two computers - how do i fix this?
In iTunes, under the "Store" menu, you can select "Deauthorize this computer". That will remove that computer from your iTunes account and free up a spot for the new computer.
If you have already sold or wiped your previous computers, you can log into your iTunes account from the Store menu in iTunes by selecting "View My Account xxxx@xxxx". Once you are logged in, about 1/4 the way down the page it will tell you that you have "xx computers are authorized......". Beside that you have the option to deauthorize all of the connected devices. That is the only option, you will have to deauthorize all and then set up the ones you want to use.
I think 10 is the maximum number of devices that can sync to one iTunes account. -
iTunes wont open. When I click on it, it says " iTunes cannot run because some of its required files are missing. please reinstall iTunes". PLEASE HELP!
See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.
-
HT201250 It say can not open because it is in a time machine backup?
How to open time machine it tells me I can not open because it is in a time machine back up ?
You can't open files in a TM backup. What are you trying to do, restore a file?
-
i tried downloading an album - my itunes locked up, in purchases on itunes online it says it downloaded - how do i re-download to the same computer - can not find an option to do that?
Assuming you are in a region where you are allowed to redownload your past music purchases, delete the corrupt tracks from the music section of your iTunes library, close & then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unchecked. This seems to help with partial downloads...
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2 -
the ipod is disabled, when i plug it in to my pc it says it can not connect without the passcode being put into the ipod, how do i fix it?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
When i want to download au video to work on it, it says that it not possible because of codec or something else i d'ont know how to say in english. It is impossible to do anything.
barbara.glet
Thanks for the reply. I need to zero in on your situation a bit more with your help...
When you go to import your .mts file into Premiere Elements 9.0/9.0.1 and you cannot, do you see this type of message only where your specific file
would be named as not support
From Premiere Elements 9.0/9.0.1 using Get Media/Files and Folders
or
Are up looking for your file in the space to the right and wanting to drag it to the Timeline, but you see the thumbnail
with the two arrows on page as seen in panasonic_lumix_dmc_ thumbnail in screenshot below.
But, that has two arrows, one red and the other green. And, you wrote that your two arrows were red.
Or something else other than what is shown above.
If it is as represented in the second screenshot, it is likely that you moved, deleted, or rename that file once it was imported
at another time into the Elements Organizer. In that case, we need to reconnect the file to the project. More on that later
once you supply the above details.
Thanks.
ATR -
I got a movie (the mist) from the itoons store. My ipad says I can not play it. How do I get this to work????
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Maybe you are looking for
-
How to prompt user to select multiple files in file dialog using scripts
Hi, is there a way to allow user to select multiple files inside the file dialog using scripts? So not just something like "*.ai" or "*.eps" but where the user can actually use their shift key to select a batch of files inside the file dialog and the
-
My icloud mail just stopped working - northern california
All of a sudden, all of my devices are asking me for my icloud password. None of them accept it when I put the corrent one in. This is for my iPad, iPhone5, and PC. Haven't bothered looking at my iMac yet. Also, suddenly my Wifi isn't working on m
-
Having a major problem with LabVIEW programming
I have been a faithful supporter of National Instruments hardware and software since 1997. During that time I have worked in academic laboratories using NIDAQ boards and LabVIEW for basic and applied biomedical research. To date, all my work has revo
-
All servicerequests containing specific iobjects
Hello, i have an internal table of iobject-ids. And i want to know all service requests in a specific timeframe created for this iobjects. I loop at the moment over my internal table and for each iobject_id i call: query = CL_CRM_BOL_DQUERY_SERVICE=>
-
Releveant Business content qureis in PP for Schedule Adherance
Hello, I have 3 KPS that I want to map to the content quereis in PP. Any help/pointer in terms of the cube and specfic qureis is appreciated. The threee KPIs wrt to Plant Output - Schedule Adherence are as below: 1. Actual output to Scheduled Product