How do I combine Projects into one project?

I like to make small projects while travelling and post on facebook. When home, I would like to combine them into one longer project for my Apple TV.
Any suggestions would be greatly appreciated.
Thanks,
Skip

you can copy (copy all) the clips from one project and paste them into another clip, but music and titles will not come with that. If you export one project as a .mov file and then reimport it into iMovie as suggested, that will easily work, but you wont be able to edit that movie's music or titles.
rr

Similar Messages

  • I have several pics of my new grandson throughout the year.  How do I combine them into one event

    I have several pics of my new grandson throughout the year.  How do I combine them into one event

    You can drag and drop photos from one Event to another. Or you can flag them and use the Events: Add Flagged photos to Select Event.
    However, why not use an Album for the job?

  • I have two different itunes music files on my computer.  How do I combine them into one file?

    I have two different itunes music files on my computer.  How do I combine them into one file?

    I don't think so. The only other ID I have is a developer id, and I didn't get that until several months after I got the phone. In addition purchases I made from the App Store onthe phone would sync up with It unes on the Mac meaning it would be the same id.
    However I looked at the AppStore on my phone while it was connected to the Mac with iTunes open, and now the balance has changed to the same as the others.

  • I have multiple documents how can I combine them into one document?

    I have multiple document files in Pages. How can I combine them into one document?

    Menu > View > Page Thumbnails > click on the thumbnails > Copy/Paste into thumbnails of other document
    Peter

  • I have 3 podcast folders in my iTunes account, how can I combine them into one folder in my iTunes library?

    I have 3 podcast folders in my iTunes account, how can I combine them into one folder in my iTunes library?

    What is the title of the other bookmark folder that can not be deleted?
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Please report back soon.

  • TS3981 After migration files are now shared between two user accounts. How can I combine them into one account?

    After migration, from PC, files are now shared between two user accounts.I have to switch users to access files. How can I combine them into one account?

    See Pondini's  Transferring files from one User Account to another, for starters

  • Songs in my Itunes show up as separate folders.  How do I combine them into one album?

    Songs in my Itunes show up as separate folders.  How do I combine them into one album?

    Is this one of those CDs where the main artist asks their friend to sing a song with them?
    Such as, Slash's new album. Track 1 is "Slash Feat. Ian Astbury", track 2 is "Slash Feat. Ozzy Osbourne" and so on.
    To fix this, select all the tracks on that album, right-click > Get Info, and say YES to changing multiple items.
    Put "Slash" in the *Album Artist* field (for this example, of course).
    Make sure it is the *Album Artist* field, not the plain Artist field.

  • How can I combine to different projects into one project?

    I would like to combine various projets into one project is the possible.

    Hello Tom,
    I have tried to copy and paste the two projects, both in the project library and in the timeline.  In the timeline the paste option is not highlighted and paste does not work.  In the project library I highlighted the project and copied the project, but I was unable to paste into the other project.  Is this done in the project library?  The paste option is hightlight but each time I paste it does not work.
    Thanks for your help

  • I Movie 09 can I combine projects into one project?

    Can I combine 3 seperate IMovie projects into one so I can burn a short film to DVD?
    I had three different people shoot 3 different sections of a short for me, now I want to put them in one project together in order and burn a DVD.

    you can copy (copy all) the clips from one project and paste them into another clip, but music and titles will not come with that. If you export one project as a .mov file and then reimport it into iMovie as suggested, that will easily work, but you wont be able to edit that movie's music or titles.
    rr

  • How do I combine PDFs into one document?

    I want to scan CD booklets for online digital storage. I have Pages and Preview, of course. I do not have Acrobat Professional.
    I have a large scanner and can make individual TIFs or PDFs of each spread. What would be the best way to combine these into one file?

    etresoft,
    Please don't read this as an actual reply to your post because it is not.
    But, since the thread is dealing with CUPS-PDF and I have been desperately seeking CUPS-PDF for a long time ever since I've got my brand new iMac only 5 days ago (5 days on a new iMac [which is not only new but is intel-based, and which I was forced to buy because my older PPC iMac G5 died of preternatural or some other causes] is an extremely long time on account of Snow Leopard, about which I am like a babe trying to start speaking for the first time) I found it more expedient to "reply" in order to get some help with CUPS-PDF from someone who knows.
    I've downloaded CUPS-PDF from "https://bitbucket.org/codepoet/cups-pdf-for-mac-os-x/wiki/Home" and installed it following the instructions included therein.
    The only instruction I could not follow is to pick "Generic postscript color printer"; I could pick  "Generic postscript printer" though.
    CUPS-PDF shows in the printer list.
    CUPS-PDF apparently prints as indicated by the progress bar.
    But, the print doesn't show anywhere on my computer:
    The output is not in /Users/Shared/CUPS-PDF in a folder with my user account's name.
    I did make an alias to this folder on my desktop but it only contains two folders: "my user name" and "SPOOL"
    The first folder had a "clone" of the download source page (which I deleted.)
    SPOOL has nothing in it.
    I've never had a problem using CUPS-PDF while on OS X 10.4.11, something I'll never be able to revert to.
    I'll be eternally grateful to you if you could help me with this issue but, on condition that you use a language as plain as English since my expertise with OS X, which was never as considerable as to be able to use terminal to any advantage, nor understanding terms such as sudos and the like, is now even diminished on account of the new OS I am forced to use from now on.
    Thank you so much for your help and excuse me for using this approach to ask for help.
    Best regards,
    Ruben

  • Combining projects into one project

    Hello Everyone,
    Has anyone tried, or does anyone know if it is possible to combine two seperate projects to become one.  Now that we have Blu-ray and it is possible to pack a lot onto one disk, it would be very advantageous if I took a number of my 20 minute projects and combined them on one disk as chapters.  Thanks so much for your response! Kent

    Normally, with SD DVD Projects, the workflow is to edit each Project, and then Export/Share to DV-AVI Type II files with 48KHz 16-bit PCM/WAV Audio. With HD Projects, there are some other considerations, such as working with AVCHD, or H.264 source files to start, and that the Project is HD, and not SD. These AV files are then just Imported into a new "master" Project for final output.
    The Export/Share should not introduce any additional compression to the files, as they are already compressed upon capture. Each generation of compression will take a toll. I'd look at adding something, like the Lagarith Lossless CODEC. I believe that it handles HD footage, but only do SD Projects, so you might need to check this out. Another "likely suspect" would be the HDV CODEC.
    Maybe someone doing this with HD source footage, and HD Projects can comment - there might be a better CODEC for the transfer files.
    Good luck,
    Hunt

  • A music album is listed multiple times in my library but each listing only has a few songs in it-not the full listing.  How can I combine them into one album and get rid of other duplicate listings?

    Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed.  How can I combine them to make one album?

    First....Thank you so much for your prompt reply.  I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved.  Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue!  I did as you suggested and all the songs list the same album when I go into each song's "get info".  However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album.  I am trying to consolidate them back into one album in my library.  I would greatly appreciate further assistance if you can.  Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this.  Thanks so much for your patience!
    SueZoo

  • I publish identical podcasts under different URLs.  How can I combine them into one?

    Over the years, my URL has changed a couple of times.  I didn't know (until recently) how to notify iTunes that the podcast location and URL had changed.  So, now after a number of years, I have three identical podcasts, each with different a different URL and a different list of subscribers.  I have them pointing to the same source file now, but I would love to combine the podcasts into one so that the subscribers from each are merged together and they don't show up as three possible subscriptions in iTunes.  Is this possible?

    You can't merge them: all you can do is to ask to have two of them deleted, and of course if you do that you will lose any ratings. However existing subscribers should all be using the same feed if the three Store pages are all using the same feed, and so removing two of them won't have any effect on subscribers.
    The method of getting a podcast removed is detailed here:
    http://www.apple.com/itunes/podcasts/specs.html#removing
    When you explain why you want each one of the two you choose removed, specifically say that the same feed is in use in three places, so you can't use the 'itunes:block' tag (because this would block all three).

  • Downloading CD's created multiple groups of tracks.  How do I combine them into one album?

    When I downloaded many of my albums into iTunes it broak the tracks down into multiple groupings, each with an album cover as though each group was a separate album.  How do I combine the multiple "albums" into just one album?

    If you select the tracks all together in iTunes/ Songs then go to File/Get info you will be asked "Are you sure you want to edit information for multiple items?" Go ahead and you can make them into an album, putting in the artist name, etc.

  • How do I combine folders into one pdf, preserving subfolders as bookmarks?

    So far I've had to go into each folder, convert its contents and name the file the same name as the folder name, and combine all of these folders. I'd like it if there were an easier way.

    Hi,
    sometimes ago I wrote a VBScript which may do, what you want.
    Copy the attached Script into Notepad, change the settings and save it as AcMerge.vbs.
    If you have produced the PDF FileList, you can double click on the VBS or Drag 'n Drop
    the PDF FileList on the vbs.
    HTH, Reinhard
    AcMerge.vbs
    REM: Insert single/multi Pdfs into one PDF, based on a filelist file
    REM: to produce a file list file you can type into "Win Start" -> "Execute" 
    REM: cmd /c "dir c:\temp\*.pdf /b /s >c:\PdfList.tmp"
    REM:  where c:\temp\ is the base-folder.
    REM: The "Settings.." you can change to your needs. Drag&drop for 1 filelist-file accepted.
    *********Settings in File**************************
    FLFile = "C:\PdfList.tmp"      '//Filename for filelist-file (files to merged)
    Ask = 1                  '//0=don't ask for Insert;1=ask
    Bookmark = 1             '//0=Insert No bookmarks; 1=Insert with BM based on Filename
    InsWithBM = 1        '//1=Insert bookmarked files with BM; 0 = insert without BM
    set WshShell = CreateObject ("Wscript.Shell")
    set fs = CreateObject("Scripting.FileSystemObject")
    Set objArgs = WScript.Arguments
    if objArgs.Count = 1 then FLFile = ObjArgs(0)
    Info = "Insert PDF-Files in Acrobat based on File-list-file."&VbCr&_
           "File Name: "&FLFile &" Start now?"
    OK = MsgBox(Info, vbQuestion+vbYesNo,"Insert Files") : if OK = vbNo then WScript.quit
      '//Start or switch to Acrobat
    WshShell.run "Acrobat.exe"
    While not WshShell.AppActivate("Adobe Acrobat") : Wscript.Sleep 1000 : Wend
    Set gApp = CreateObject("AcroExch.App")
    gApp.Show
    if not fs.FileExists(FLFile) then
         MsgBox "Ups! " & FLFile & " doesn't exist? " & "Try new!", vbExclamation
         WScript.quit
    end if
    set FLFileInhalt = fs.OpenTextFile(FLFile)
    FLPOS = 1
    do until FLFileInhalt.atEndOfStream
       inhalt = FLFileinhalt.ReadLine
       if  fs.FileExists(inhalt) then
       if Ask=1 then if MsgBox(FlPos&": "&inhalt, vbOKCancel + vbInformation) = vbCancel then exit do
              ' /->Open first File
         if FLPOS = 1 then
            ' Set gApp = CreateObject("AcroExch.App")
            Set BASFL = CreateObject("AcroExch.pdDoc")
            OK = BASFL.Open(INHALT)
            if not OK Then if MsgBox("Error open Basic File") then Wscript.quit
            BASFL.OpenAVDoc(mid(INHALT,InstrRev(INHALT,"\")+1))
            WScript.Sleep 500
            Set avdoc = gApp.GetActiveDoc
            Set pddoc = avdoc.GetPDDoc
            Set jso = pddoc.GetJSObject
            PageBAS = BASFL.GetNumPages-1
          else
            PageBAS = BASFL.GetNumPages
            jso.pageNum = PageBAS+1
            Set INSFL = CreateObject("AcroExch.PDDoc")
            OK = INSFL.Open(INHALT)
            if not OK Then if MsgBox("Error open InsertFile") then Wscript.quit
            PageIns = INSFL.GetNumPages
            OK = BASFL.InsertPages(PageBAS - 1,INSFL,0,PageIns,InsWithBM)
            INSFL.Close
            jso.pageNum = PageBAS+2
          end if
          if Bookmark = 1 then
            BMNameIE = mid(Inhalt, InstrRev(Inhalt, "\")+1)
            BMNameEE = left(BMNameIE, InstrRev(BMNameIE, ".")-1)
            Set BMR = JSO.BookmarkRoot
            BMR.CreateChild BMNameEE, "this.pageNum = " &PageBas, PageBas
          end if
        FLPOS = FLPOS+1
       else  '/-> file in Filelist (=inhalt) doesn't exist
           Ok = MsgBox(Inhalt &vbCr &"File don't exist! - Continue?", vbQuestion+vbYesNo,"Insert Files")
            if OK = vbNo then QUIT
        end if
      loop
    MsgBox "DONE!" &vbCr &"Don't forget to save the File (save as)"

Maybe you are looking for