How do I combine two regents into one in Logic Pro Arrange?

how do I combine two regents into one in Logic Pro Arrange?

Thanks for your input kcstudio. I would still be left with 2 regions although one after the other, on one track.
I am trying to save steps of the way I am combining the info of 2 seperate regions into one: bouncing the 2 tracks then re-importing that audio back into the project. It would save a lot of time if you could just drag one region on top of the other
                            W.W.

Similar Messages

  • HT4759 How do I combine two accounts into one

    How can I combine two accounts into one account

    If you are talking about iCloud accounts, you can't.
    Or you could tell us what type of accounts these are?

  • Question - how do I combine two users into one?

    I have migrated a lot of data to a MacBook Pro using Migration Assistant, in the process two users have been created on the Mac. How do I combine the two users into one?

    You don't. Just log in with one, choose Go to Folder from the Finder's Go menu, provide /Users/ as the path. and drag the folder there; you'll need to provide an administrator password at some point.
    (108352)

  • How do I combine two arrays into one?

    I am trying to combine two byte arrays into one. What function do I use that will put in the information in the same order just combined?

    battler. wrote:
    Julien,
    Used LV for years.  Never knew that (concatenate inputs).  Wouldn't believe the lengths ive used to get around it.  Thanks
    Same here! I actually learned about it taking a sample test for the CLAD.
    Richard

  • Combining two messages into one

    Hello,
    I have a mapping issue, I have a business process in which I have to combine two messages into one.
    To do so, I have defined a message mapping in which there are two source message types, and one target message type.
    When testing the message mapping in the IR, it works fine, but when I define and test an interface mapping with that same message mapping, I receive this error message:
    "Cannot produce target element /ns0:Messages/ns0Message1/MY_IDOC_TYPE/MY_SEGMENT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd."
    What am I doing wrong ?
    How am I supposed to combine two messages into one ?
    Thanks,
    Elad.

    Hi Elad,
    Just see if you have included both you source message interfaces and one target nessage interface correctly in while doing your interface mapping.....
    The most common mistake made when we do scenarios which include combination of two source message types into one target type are:
    - we forget to include both the source message interfaces.
    - or we interchange between one of the source message interface with the target.
    Just see if either of the 2 is aplicable in your case and just activate all components as and when you create them..
    Regards,
    abhy

  • I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album?

    I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location.  They are pictures taken at different times and have the same number I guess.

    In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
    If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
    LN

  • How Do I Combine Several Images Into One Image Which Contains Links To A Series Of Web Sites?

    How do I combine several images into one such that the combined image contains a series of web links? In particular, I’d like to create such an image and put it into my Outlook email signature. At present, as per the image below, I have at least six separate images in my email signature with each image containing a web link. Is Photoshop the best tool for this job? Or would it be easier to do this in some other package? I have three packages at my disposal: Photoshop, Ilustrator and Dreamweaver. Can someone please explain in detail how I would do this? Or perhaps someone could direct me to a link that explains how to do this. Thank you.

    Thank you for that correction, Hobotor. I admit I hadn't thought about an image map, in the context of someone who doesn't seem to know HTML very well...  My thinking was running along the use of the Photoshop Slice Tool to get most of the way there...
    To expand on the above, if you were to slice up your image using the Slice Tool, say like this:
    Save for Web & Devices will create the HTML and save all the sub-images.
    Then you edit the HTML and add a (hypertext link) elements surrounding the various images.  Only thing is you'll have to set the border-style of the images to none.
    For example:
    <!-- Save for Web Slices () -->
    <table id="Table_01" width="554" border="0" cellpadding="0" cellspacing="0">
    <tr>
      <td colspan="10">
       <img id="Sig_01" style="border-style:none" src="images/Sig_01.jpg" width="554" height="56" alt="" /></td>
    </tr>
    <tr>
      <td colspan="10">
       <a href="http://www.GrahamsWebSite.com"><img id="Sig_02" style="border-style:none" src="images/Sig_02.jpg"
            width="554" height="43" alt="" /></a></td>
    </tr>
    etc.
    A full copy of the HTML and images can be found here...  View Source to see it as an example:
    http://Noel.ProDigitalSoftware.com/temp/Graham/Sig.html
    -Noel

  • How to Combine two queries into One

    Hi Gurus,
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
    PL/SQL Release 10.2.0.4.0 - Production
    CORE    10.2.0.4.0      Production
    TNS for Linux: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production
    SQL>
    I have following two queries. How I can convert these two queries into one with the same result ?
    Q1
    SELECT id,vdate,vendorname,venddate,vid
    FROM VENDOR
    WHERE processid=32
    AND venddate is null
    AND vid in(select vid from view_vid where type='PDX')
    AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=55)
    AND (id,vdate) in (select id,vidate from market_data where marketed_date is null)
    AND id not in (select id from location)
    Q2
    SELECT id,vdate,vendorname,venddate,vid
    FROM VENDOR
    WHERE processid=20
    AND venddate is null
    AND vid in(select vid from view_vid where type='PBX')
    AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=40)
    AND (id,vdate) in (select id,vidate from market_data where region_date is null)
    AND id not in (select id from location)
    I can UNION these two queries, but, is there any way I can write a single query with which gives me same result as above two queries?
    Any help would be highly appreciated
    Thanks in advance

    Hi,
    You can do something like this, which will be more efficient than a UNION:
    SELECT  id, vdate, vendorname, venddate, vid
    FROM  vendor
    WHERE  (   (    -- Conditions that apply only to q1
                               processid = 32
                AND  vid       IN (SELECT vid FROM view_vid WHERE type = 'PDX')
                AND (id,vdate) NOT IN ( SELECT id, vdate
                                        FROM   vkfl_is
                                        WHERE  task_id = 55
                AND (id,vdate) IN ( SELECT id, vidate
                                    FROM   market_data
                                    WHERE  marketed_date IS NULL
            OR  (  -- Conditions that apply only to q2
                     processid = 20
                AND  vid       IN (SELECT vid FROM view_vid WHERE type = 'PBX')
                AND (id,vdate) NOT IN ( SELECT id, vdate
                                        FROM   vkfl_is
                                        WHERE  task_id = 40
                AND (id,vdate) IN ( SELECT  id, vidate
                                    FROM  market_data
                                    WHERE  region_date IS NULL
                   -- The remaining conditions apply to both q1 and q2
    AND     venddate   IS NULL
    AND     id         NOT IN (SELECT id FROM location)
    I hope this answers your question.
    If not, post  a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • How do I combine two FLVs into a split frame single player?

    Hello. I want to know how to duplicate the functionality on
    http://www.vcasmo.com
    There is what appears to be a single flash player, but two
    separate FLVs (one video, and one PPT). The PPT is synced to the
    video based on timing settings created when you upload and mash the
    assets.
    I know how to convert PPT to Flash, easy. But I don't know
    how to put both FLVs together into one. Secondary, is how do I sync
    the timing?
    Thanks!

    P.S. I am trying to do all this via command-line so I can
    automate everything (using ColdFusion of course!) for an in-house
    web project.
    So if all I have to do is create the SWF that houses the two
    vids/clips, sounds like I should still be able to use command-line
    to set everything up, right? I am new to this obviously.
    For the PPT, as I mentioned, I would be converting it to FLV
    (or any format really so that I can combine things).
    Thanks for the feedback!

  • How do I combine several pdfs into one document?

    I just switched to Yosemite, and now I cannot figure out how to combine several pdfs into one document. I rarely need to do this, so I looked at past tutorials, but nothing seems to work. Help!

    I don't understand - I've just tried it and it worked. I had 2 multi-page pdfs, opened both in Preview, followed my earlier post and saved the new pdf. The saved file is multi-page
    Odd

  • Combining two tables into one result

    Hi all, I am fairly inexperienced with Crystal but have gained good results from the reports I have created, I am fluent in SQL and Basic to an extent.  I am interigating a Pronto database and I want concatenate two tables into one report.
    Table One: Customer Orders
    Fields:  Customer No, Invoice Number, Invoice date, Invoice Amount, Cost Amount.
    Table Two: Archived Customer Orders
    Fields:  Customer No, Invoice Number, Invoice date, Invoice Amount, Cost Amount.
    I want to complete a report that will tell me the sales for a given period and the outstanding orders for each customer total for all fields in each table combined into one figure.
    Any help would be greatly appreciated.
    Thanks in advance

    Hi Grant,
    As you said you are goot at writing SQL, in Crystal write a SQL statement in Add Command to join both table using Union / Union all
    If you use Union then it will filter duplicate records and pull the data from database, If you use Union All then it will include all your duplicate records.  Please use Union / Union All as required.
    Once you get all data into the report create a parameter for date range and generate the summaries as required.
    Thanks,
    Sastry

  • How do I combine to clips, into one split screen clip

    yeah ^ please help me

    How do I combine to clips, into one split screen clip
    Since iMovie '08 automatically centers files and currently has no control settings that allow the user to offset or displace the clips, this effect cannot be done from within this versions of iMovie. You can, of course do this externally using QT Pro, Final Cut, or Studio.

  • How to combine two albums into one

    I imported into iTunes two Shostakovich compositions so that I could burn a CD-R that contained these two works. The CD burning went fine, but iTunes insists on separating the two compositions into two albums in the display of all albums. I have made sure that the album titles and the artists displayed under the album icons are identical, but still the two will not meld into one. Will someone help me with this? I am using iTunes 9.2.1(4).

      On the "Get Information" windows (reached with right clicks) of the two separated albums, one album was marked as "no" on the "part of a compilation" option and the other was marked "yes". I changed the "no" to a "yes" and they merged. I'm not sure if I got this from the site you gave me or if I just stumbled on to it. Either way, I thank you for your kind responses.

  • How do you combine to partitions into one complete

    my imacs harddrive is currently formatted into two different partitions one has my main Mac OS X lion on it and the other originally had snowleopard on it. i have formatted it but am unsure how to combine the empty partion with the Mac OS X one?

    It should work (according to the Apple textbook I have). The issue at the moment is that your boot partition starts from 1/2 way through the disk. We can't append the free space to it, because it precedes it. That blue section is your data, and we can't move it. If the boot partition starts from the top, you can make it bigger, as you are just enlarging the white unused space, not shifting blue data. Like Igor says, make sure you have a backup.

  • I have three different ipods with music on them and have had to replace our computer as it was in a fire. How can we combine the ipods into one ipod.

    We had to replace our computer due to a fire and lost many of the fiels which were on them. Many were music files for the ipods, we have thre. Also, do not have ID's and passwords to the iTunes store.
    How can we combine the information so that they are all in each one or at least compbine everything into one ipod?

    Just so you know the method suggested by Nelsonleee will cost your $29.95 USD, Yamipod is free.

Maybe you are looking for

  • Best way to log data

    I have an application that receives data from a source, and I would like to create and maintain a log file with this data. Small bits of data will be received at least every minute, and often once every second. The user can also view the logged data

  • Purchasing Controls - Purchase Orders from Purchase Requisitions

    I need some help with setting up purchasing controls.  We are looking to put in place a control that allows users to convert purchase requisitions into PO, but only create the purchase order for the quantity on the purchase requisition. As I see it,

  • Special characters for 0BATCH

    Dear Gurus,       For our 0BATCH characteristic there is a loading problem with value "#". We need to restrict the users for not to input value "#". For BATCH as I know "#" is not acceptible. Here my question , is it acceptable if we have "#" along w

  • Is Adobe Photoshop Elements Version 9 compatible with Corel KPT Collections 5,6 and 7?

    To Whom It May Concern. Is Adobe Photoshop Elements Version 9 compatible with Corel KPT Collections 5,6 and 7? I am using a PC computer.. Thank you in advanced.. Regards, hypergraphical

  • Conn.prepareStatement gives error Alternatively

    Hi, I m using Oracle as backend and my AS is WAS 5.1. Whenever my batch preparedstatement get called it generates error in conn.prepareStatement alternatively. On Ist 3rd 5th it works fine but on 2nd 4th and 6th time it gives error. By the stacktrace