How do I compress for HD projection?

I need to deliver a movie to Alaska that will be projected in HD to "fairly large audiences." Sorry to be so vague, but the movie will travel to various venues and potentially be used on a variety of projectors. The movie was edited in FCPX 10.1 in 1920 x 1080p, 23.98p. I will be using Compressor 4.1 on an early 2013 MacBookPro Retina. Thanks!

Hey Russ, thanks again for the quick response. Amazing. And the articlel you linked was very interesting.
But I think maybe I gave the wrong impression with my post. My not-for-profit "movies" are generally 15 to 35 minute documentaries that are played from a laptop through an HD projector. Not a professional theater. Often in churches or schools. (If you have 3.5 mins., here's a an example: Klawock Carving Shed Project.)
So delivering a .mov file will be sufficient. I just didn't know which compression settings would give the best quality AND also be delivered by UPS to the end user on something like a flash drive or a small laptop drive. This specific doc is 36 minutes long. I have exported a Master File from FCPX (ProRes 422). The file size is 30.02GB.
Since most of my stuff is viewed on the interweb, classic Vimeo 720p works fine.

Similar Messages

How implemenataion process going for a project in an orgn?

hi friends
i am deva
how implemenataion process going for a project in an orgn?

Dear Deava,
During an implementation project you follow 5 phase.
1.Project preparation: In this you will know your team members and you will have kick meeting. You will decide the time frame for the project also.
2.Blue print: In this stage you will map the business scenarion.The client will give the requirement(AS-IS) and you will map in sap(TO-BE). If there is any development you need to do the GAP analysis.
3.Realization/Testing:In this stage you will configure in the development server and test the configuration you have made in quality server.
4.Final preparation: In this stage your configuration is done . You will get the sign off from project manager.
5.Go live & Support: In this stage you will upload all your developments in the production server.Then you will golive and stay in the client place for sometime for support and solving few queries.
The above 5 stages are followed in any project.
If your happy with the answer award point for me
Regards,
R.Francis Noel Manoj

How to increase memory for building project using ant in ECLIPSE

Hi All,
for all java projects and java applications in eclipse i am giving -Xms and -Xmx to increase heap memory.
But the same failed when i run ant. it says Out of Memory Error.eventhough i had 1GB ram in system.
How to increase memory for Building through ANT.
Thanks,
J.Kathir

even if this is not a eclipse forum
In the package explorer view or navigator view right click on the build file select "Run as / Ant Build ...". On the JRE Tab you can enter the VM Aguments like -Xmx512m
Consult the java dokumentation how to set the memory of the jvm.

How to manage source for java project using eclips?

Hi,We use TFS 2013 and VS 2013 for source control ,now we want to start mobile app using eclips,
How to control source of that project,How we can have features of tfs source control on that type of project such a mobile that use eclips.
thanks
Thanks. Bahar Ghadami Web Developer And Technical expert

Hi Bahar,
You can manage your source code with both Eclipse and My Eclipse.
Please follow this link to install the Plugin (Team Explorer Everywhere) to manage your source code.
http://msdn.microsoft.com/en-us/library/hh301122.aspx

How to setup security for new project type templates?

Hi Folks,
I created some new project type templates.
But, as per management decision, i need to restrict this new project templates for all project users except only one super user.
So, could anybody please help me out that how to make security in the above scenario?
Thanks in advance,
SPR

Soooo...I need to install OID on top of my Forms, Reports, and Discoverer install? Would it be better to install the SSO and OID before installing any other middle ware products like Forms, Reports, and Discoverer? Then extend the domain to include Forms, Reports, and Discoverer?
Can you point me to documentation that would help me get this issue worked out?
Thanks.

How to specify COMPRESS FOR OLTP on a table in physical model?

Hi,
we have licensed Oracle's Advanced Compression and want to use the OLTP compression on some tables. I am looking for a way to specify COMPRESS FOR OLTP on a table in the physical model. So far, I can only set "Data Compression" to YES or NO.
Are you going to add the "new" compression modes in the next release?
Thanks,
Frank
Version of SQL Developer Data Modeler is 3.1.3.709

Hi Frank,
Are you going to add the "new" compression modes in the next release?There is support for compression type (including OLTP) in DM 3.3 EA and you can download it from OTN.
Philip

How to display Issues for the projects which user can view in the Project Center View

Hello All,
In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
Example: A resource 1 can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
been assigned to any resource.
Please help.

Hi,
You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How do you look for small projects?

Hi. I'm working as a labview developer and I'm looking for small
projects that can help me financially. Are there any site where I can
find some work that involves labview programming? I'd like to work as
a consultant for those projects and they can be as small as $100 or
so...
Any of you who's looking for a labview consultant is also welcome to
give me any work.
Thanks for reading.

Maybe here:
Apple Retail Store - Genius Bar
I really do not understand your question

How to map services for Implementation Project

Hii
its an implementation project
Client is providing normal sales and services ( Job work ) also
for that purpose how we can map services in SAP SD
1 ) by creating different sales org (services)
or
2 ) by creating different doc type for services
which 1 is better
ThanX

HI,
Service document is most better.......b'coz you will get efficient reports thr this...and you ccan maintain Diff Pricing procedure for this....
Regards
Raj

How to setup CVS for portal project

Hi,
Can u suggest me the best way to organize CVS directory structure for the portal
project.
Right now i have c://bea/user_projects directory contains applications & domains
sub directory.
1) Should i create 2 projects or one project in the CVS ?
2) How about SourceCode ?
thanks in advance.
vandana

Hi,
thanks.i am trying to write a build script to deploy files from CVS server to
the Dev Environment(then to Production).Can u tell me the directory structure
inside your EAR.
i want to keep domain related files,java soruce codes etc.
thanks
vandana
"Kunal Mittal" <[email protected]> wrote:
>
We use one CVS module.
c:\bea\user_projects\applications\APP_NAME
under APP_NAME we have the entire app (EAR file structure).
Kunal
"vandana" <[email protected]> wrote:
Hi,
Can u suggest me the best way to organize CVS directory structure for
the portal
project.
Right now i have c://bea/user_projects directory contains applications
& domains
sub directory.
1) Should i create 2 projects or one project in the CVS ?
2) How about SourceCode ?
thanks in advance.
vandana

Determine how much to allocate for /etc/project

Question on how to determine how much resources a particular is actually being used on a solaris 10 server because I don't want to over allocate, esp for max-shm-memory to a particular project.
Current setting in /etc/project
user.test:101:Test project:::project.max-sem-ids=(privileged,1024,deny);project.max-sem-nsems=(privileged,512,deny);project.max-shm-ids=(privileged,512,deny);project.max-shm-memory=(privileged,2048000000,deny)
Thank you
Mike

Thanks wsanders.
I did ipcs -b and added the values in column 7 of the shared memory section to determine the amount of shared memory used.

How to set paths for bc4j Project in release 2

Hi
I have a workspace with 2 projects 1 bc4j and the other contains my jsps etc
They were created in JDev9i RC
I have recreated my connections in release 2
I have opened the projects in Release 2 I am trying to run the bc4j Project to test if all is working in release 2 and I got a whole host of errors like:
-jsp files must reside in the server root directory or a subdirectory beneath it
-cannot access directory javax\servlet\jsp : verify that directory is reachable from classpath and \or sourcepath
-cannot access class oracle.jsp.runtime.HttpJsp : file oracle\jsp\runtime\Http.Class not found
It seems like there is something I need to specify in the classpath /path
but I am not sure what
Any one know?
thanks

Hi
Thanks for your response
The bc4j project compiles and runs fine now
but I am still getting a runtime error
when I run the jsp project
the error is
JBO-33001: Cannot find the configuration file /IntranetPackage2/common/bc4j.xcfg in the classpath
I have tried including that path in the java source path but still no effect
It appears there is a little snag at each step of the way

How to write testcases for a project which has been already developed

Hi all,
I am new to flex unit , whether i need to write testcase for all the classes in the project or i need to write according code flow of the project. I got confused .. help me guys ....
Thanks
karthy

You can create item inside your LOV region, set the item style to formValue. You can associate this to a View Object field. It can also act as mirror of any other text input field.
FormValue can hold the value and will not be diaplyed to user. You can read value from it controller
example
OAFormValueBean orgValue = (OAFormValueBean)webBean.findChildRecursive("OrgIdFormVal");
Or you can read it fro the VO associated with this form value.

How to configure dreamweaver for CodeIgniter Project ?

Hello ,
is it possible to configure DW in order to work with CodeIgniter ???
if yes , please did you know how to do that , I begin
thanks

As far as I know there is no code-hinting available for CodeIgniter in DW.

How do I search for a PROJECT name?

I go to Find>Other Data>Project>includes>{string}, but it doesn't find the string (which I know exists).
I've tried this from Library, All Photos, and from Blue Folders that contain projects. Doesn't find anything.
Any ideas would be appreciated. Thanks.

I put in a feature request for a "spotlight" type feature in the Projects Inspector. Please do the same.
If I remember which folder I put it in, I don't need to search for it.
Also the method above just displays the images from that project. It doesn't tell me precisely where the project is located.
DLS

How do I compress for HD projection?

Similar Messages

Maybe you are looking for