How do I configure a proxy for all users via GPO on Server 2012 R2?

I would like to configure a proxy that applies to all users that log into our server running Server 2012 R2. I can manually set up the proxy (on an individual account basis) via Internet Options in Control Panel but this proxy needs to be configured for
all users. Is it possible to do this in Group Policy Management for Server 2012 R2?
Thank you
Silas Horton

> Have you checked *User configuration\Policies\Windows Settings\Internet
> Explorer Maintenance\Connection\Proxy Settings *in group policy?
He cannot check this because it is't available anymore starting with
Server 2012/Windows 8/IE 10...
> Hope it helps.
No, it doesn't :)
Better check User configuration - Preferences - Control Panel Settings -
Internet Settings
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

How can i delete keychain data for all users on my Mac Server?

We have 2 Mac servers on our windows network and user passwords change every 30 days to keep up with security. How can i stop keychain asking for the users old passwords or get it to update with the change of password?

Hello,
First you have to create a new folder or 2/3, om My Mac... Mail>Mailbox>New Mailbox...> Loacation>On My Mac.
Highlight the eMails & drag to the new box(es), if IMAP Mail will try downlodaing them again.
If POP & Remove fron Server when downloaded it won't.
Quit Mail after the move, log into gMail Webmail via a browser & delete what you wish.
PS. Even though you delete everything in gMail, google keeps copies for themselves & the NSA, just you cannot see them.

Hi, While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed? Thanks!

Hi,
While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed?
Thanks!

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

My nodejs and php component is ready but how will we insert in eloqua for all users?

Hi there,
my nodejs and php component is ready but how will we insert in eloqua for all users?
Thanks

Hi there,
Please help me.

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to set a common page for all users after loging on?

hi all,
Now "My Dashboard" is the default page after logon.
i want to set a default home page for all users. users can see the home page after loging on.
how to change the default dashboard from "My Dashboard" to "Home page" for all users?
thanks,
dan

Hi,
Steps:
Tried to set default dashboard for all the users.
1. Created a session init block
2. Used data source as select '/shared/SH Test/_portal/Test1' from dual
3. Assigned this value to PORTALPATH session variable
4. In Presentation services > Administration > My account > Default dashboard should be set to 'default'. Then only the dashboard specified in init block will be displayed otherwise My account will override the init block.
5. Save the changes made to rpd.
5. Logout and relogin to see if it is working fine. it is working perfectly fine.
For details please refer the GSC replication document. But it is for all the users.
if customer would like to have user/group based home page.
1. They may need to have 2 separate tables.
i. Group_path_tab with 2 columns. Group_id, portal_path
Have group wise portal path for all the groups
ii. User-group map table
Group_id, Group_name, user_id
User should be part of some group.
2. Then in the init block write the sql should be something like this
select A.portal_path from Group_path_tab A, User_group_map B
where B.user_id = :USER
and B.Group_id = A.Group_id
SO based on USER session variable, it will try to identify the group and then the portal_path.
Finally assign this value to PORTALPATH session variable.
ref:
http://total-bi.com/2011/01/obiee-11g-change-default-dashboard/
Thanks!

How do I completely disable initial "Checking Compatibility of Add-ons" pop-up for all users on a Citrix server where the FireFox was upgraded to 29.0.1

I have a set of Citrix servers, we need to upgrade the FireFox on them to 29.0.1
When I have done this, and a user runs FireFox, now the users are being presented with a pop-up "Checking Compatibility of Add-ons" which delays the start of FireFox.
I need to prevent this so users just see FireFox start up without any delays.
I have installed the add-on that re-enables extensions.checkCompatibility and tried various ways of implementing it like pref("extensions.checkCompatibility", false);
However we seem to have a situation where the add-on that enables the setting is not loaded yet so the setting is not implemented.
How do I solve this for all users?

You can try to set the browser.startup.homepage_override.mstone pref to ignore on the about:config
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone
You can use a mozilla.cfg file in the Firefox program folder to specify new (default) values and possibly lock prefs.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/

How do I startup an application for all users at login?

I know about launchd, but I want an application to start whenver a user logs in and run as that user. launchd stuff seems to run as root.
I would prefer to set this up to work for all users, but if that can't be done, just for the current user. I have an installer package and Id like to run this command to set this up from a bash script.

I found this bit of code which is very similar to something else I found.
defaults write ~/Library/Preferences/loginwindow AutoLaunchedApplicationDictionary -array-add '{ "Path" = "/path/to/script"; "Hide" = "0"; }'
That doesn't work. Anyone at all, even for a single user, how do I script a command to get an application to start when a user logs in under 10.8?

How to embed fonts in document for all users

Hello,
we are using a custom font for our documents. I know it's possible to embed fonts in document when saving.
Is there an option to enforce this setting with a policy?
I cannot find the right policy in the Office Policy templates.
We are using Office 2013 x86.
Thanks in advance.

Hi,
Based on my knowledge, the option is document-based, we can't control this on the Policy level.
If your request is to turn on this option for all new created documents. Since all new documents are based on the Normal.dotm template, a workaround is to create a new Normal.dotm template in which this option is checked:
Browse to C:\Users\Username\AppData\Roaming\Microsoft\Templates, open Normal.dotm, tick the option and save it as Normal_1.dotm, save it in the same location.
Then rename the old Normal.dotm to Normal.old, rename Normal_1.dotm to Normal.dotm.
Open Word and create a new blank document, you will see this option is ticked.
To deploy this file for all users, we can write a startup script. The process is like: 1. Remove the old Normal.dotm, 2. Copy the new Normal.dotm template from a network shared location to C:\Users\Username\AppData\Roaming\Microsoft\Templates.
I hope the information is helpful to you.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to create shortcut desktop icon for all users???

Hello All,
I want to know how to create shortcut icon for all users in windows 7. I tried C:\Users\Public but no folder for Desktop.
Thanks

C:\users\All users
JS
Hi,
I am just wondering, what is the technically correct location to place say, a shortcut, for all users to access on their desktops on a given machine?
Is it C:\Users\Public\Desktop ?
Or is it C:\Users\All Users\Desktop ?
Would it also be possible to explain the differences as well? Or paste some links to the overview of each one? I am having trouble finding anything from MS.
Thank you.

How to suppress a Security Notifcation for all users

How can we suppress the notification If you open this document, anonymous usage data will be sent securely to this remote server: To learn more about what this means for you, please click on the 'Privacy and Security' button. check box - Allow collection of detailed usage data check box - Do not show again _________________________________________________________________________________________ __________________________________ I'm looking for a way to tick the box 'Do not show again' for all users perhaps through a registry setting that can be set via GPO? Thanks, Brian

Well as a workaround you can create an email address/folder and provide this in SOCT and then from this mail folder , setup a rule to forward the mail to all receipients.

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How do you set default programs for all users when deploying Windows 8.1?

I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
to be the default for opening pictures, videos, etc. Can that be done?

Great question, this has been bugging me too!
So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
After filtering out the junk, I could see some *interesting* writes to the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
"Hash"="57y87/ogggU="
"ProgId"="PhotoViewer.FileAssoc.Jpeg"
But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers. This is both good news and bad.
Background:
One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
Solution:
This blog appears to have the answer:
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
From:
<Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
To:
<Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
perhaps seperate GPO's for Desktops/Laptops vs Tablets?
-k
Keith Garner - keithga.wordpress.com

How to disable tabs in titlebar for all users?

I want to disable tabs in title bar for all users, because looks ugly http://i57.tinypic.com/33nkm77.png
I type to C:\Program Files\Mozilla Firefox\defaults\pref\local-settings.js
pref("browser.tabs.drawInTitlebar", false);
It doesn't work, but any other options in this file works fine.
Setting with about:config works fine, but only for currrent user.

I think that preference refers to what happens when you have Firefox maximized and you do not display either the classic menu bar or the title of the page in that area: the tabs slide up to the top.
I agree the double-high blue area is irritating. To modify that, I think you need to do one of these:
* Change the Windows XP color theme (I always preferred Silver)
* Create a custom style rule to modify the appearance of the tab bar (so the blue does not show through it)
* Find a Firefox theme that fixes that area (e.g., [https://addons.mozilla.org/firefox/themes/])
I haven't researched the second and third options in detail.

URGENT : How to retrieve Last Accessed Timestamp for all Users in GRC

Dear Experts,
Please help me with this urgent request. Appreciate your help in advance.
My client is trying to understand the usage of the GRC application and would like to know information regarding the Last Accesse Time for all users who have logged into the Oracle's Governance, Risk and Compliance applcaition.
Thank You,
Rakesh

If you still need the solution,
Have a callback on OnSubtaskUpdated in your BPEL. This call back will be called for any updates in parallel approval pattern.
Thanks
--Sreeny

How do I configure a proxy for all users via GPO on Server 2012 R2?

Similar Messages

Maybe you are looking for