How do i configure an srw224p IGMP settings for an HMDI over IP pair?

Hi, I have a minimal understanding of IGMP but am told I need to configure it properly when putting an HDMI over IP transceivers on my network. We have two SRW224P switches with 2 Gbit ports each, connected via fiber through fiber GBICs, one slot on each (ports 25). The other gigabit ports (ports 26) we have plugged in an HDMI transmitter and receiver pair.
IGMP is enabled on both switches, but in just a default configuration. We are experiencing problems with network and VOIP phones on these switches when the transceivers are connected. Wavering sound quality and intermittent network failures across the board.
How do I isolate the multicast packet broadcasting obviously causing the trouble from the transceivers? i.e.: how do I isolate the port 26 traffic from the rest of the network. I'm told I need to use IGMP which I know little about.
Any help would be greatly appreciated.
THanks
-Mike

Similar Messages

How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?

Hello SAP Guru's,
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
Thanks in Advance.
Prashant Kunjir

Have a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi

How do I configure a deployed webapp (war) for access without port numbers

Using WLS 11g.
Have created a managed server called "DeplymentServer". This managed server is listening on port 9005.
I have deployed a war, webapp, and selected the DeploymentServer as its "target".
The war file was originally on our 10g OAS and deployed as OC4J and I made no changes to prior to deploying to our 11g Weblogic installation.
On 10g we used to be able to call the webapp directly from one of our webpage like this:
https://cxxxxx.nswc.navy.mil/wizardapp/wizard?REQUEST=Change_Request_Form
Now on 11g I have to remove the "s" from https and include the port. So now my url looks like this
http://cxxxxx.nswc.navy.mil:9005/wizardapp/wizard?REQUEST=Change_Request_Form
I am currently testing this behind a firewall so http will work here as will the port, but when we go live these won't.
My questions are:
1) Is there a way to configure the webapp deployment or the managed server, so I don't have to include the port number to access my deployment?
2) How to I configure so I don't have to remove the s from https.
At the moment question 1 is more pressing.
I think If I can get question 1 squared away question 2 may get corrected as well.
Thanks in advance for any help.
Steve.

Hi Steve,
Port 443 is the default HTTPS listen port for Servers...so to access an application using : https://cxxxxx.nswc.navy.mil/wizardapp/wizard?REQUEST=Change_Request_Form .... You were not needed to provide the 443 protocol in the URL because ur Server (Or the frontend proxy) was also listening on 443 SSL port.
Now as u want to use HTTP Protocol...(Port 80 is the default HTTP listen port so it will not be visible in the URL)... So you have 2 options now:
Option-1). Either u change the Server Port to 80 (Server in which ur Application is deployed) so that the Port will not be visible on the URL.
Option 2). Install a WebProxy (on Port 80 infront of the WebLogic Server)...and by pass the requests to the WLS through the Proxy. like: http://weblogic-wonders.com/weblogic/2010/05/13/apache-proxy-as-static-content-repository/
Thanks
Jay SenSharma

How do i restore default text/font settings for fire fox?Text is not displaying correctly some letters not dark and see odd characters inplace of letters in words

How do i restore my text so that all words are uniform in darkness?Now some letters are fragmented or missing a part of it and see odd characters instead of letters in some sentences.Ive tried different fonts in the Options still the same.Would like to
be able to restore my default settings for text/fonts.Would that eliminate this problem?

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

How do you configure the ADC on RIO7833R for differential inputs?

I use the 7833 RIO board; my signal source is a differential signal.
According to the documentation I can configure the inputs to be differential using software, but I have not been able to find any instructions on how to do this. Can anyone point me to a way to achieve this?
There is the obvious "braindead" method of putting the positive signal into AI0+, and the negative signal into AI1+, then subtracting - but that would only allow me to use 4 inputs, not all 8. And it would probably increase the noise due to ADC nonlinearity. The diagrams show a MUX, I just can't seem to find a way to configure it and the default mode appears to be single-ended.
Thanks a lot for any information!
Floris HJ.

That's great help, thanks Prashanth. It answers the question which I asked, not the one I wanted answered. So now the 64 thousand dollar question (from the days when that was still a lot of money):
Can you do the same thing from software? In other words, could I set up my VI so it can change input mode in response to a user input or other external condition, and that doesn't require a user navigating to the project explorer? It would appear that there is some direct access of flash memory going on. If we know the address, could we poke that register directly (perhaps from the FPGA code itself - obviously we'd then have to signal from the host VI to the FPGA code but I know how to do that).
Thanks in advance for any help.
Floris

How do I get back to default settings for photoshop elements edit

How do I get back to default settings of photoshop elements 9 for edit. I tried to edit one picture and now all of my pictures are discolored.

Quit the editor, then restart it while holding down ctrl+alt+shift (cmd+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

How to reset all Internet Explorer 8 settings for a different user profile?

Sometimes users on locked down PCs that need their IE settings reset to resolved issues such as improper/old cached credentials stored in the browser after a password change etc. These issues can be resolved by opening
Internet Options, Advanced tab, Reset, Delete All, Reset.
The users cannot do this because the Advanced Tab is hidden by policy. If an administrator logs in with a different account, of course, anything they change is in their profile and not the user's profile.
Is there some way for an administrator user to log in and access Internet Control Panel settings for a different user's Internet Options so they can reset the browser for a limited user?
We need a more streamlined way to do this instead of needing to either blow away the user's entire Windows profile or else go through the convoluted process of getting the GPO admins to undo the group policy for one user to unhide the tab, have the help
desk reset the browser for the user and then have the GPO admins reapply the original policy.

You can try the following script
Reset Internet Explorer all Setting to default using PowerShell Script
http://gallery.technet.microsoft.com/scriptcenter/Reset-Internet-Explorer-20f838e7
but this script still launches an interactive interface, you can ask in this form to improve the script to achieve an totally unattended process.
The Official Scripting Guys Forum!
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
You can create a task schedule to trigger the process. When computer starts or
IE open , the script launches itself automatically.
Schedule a task
http://windows.microsoft.com/en-au/windows/schedule-task#1TC=windows-7
Regards
Yolanda
TechNet Community Support

How do I determine correct media encoder settings for Blu-Ray

I am successfully producing Hi Def Blu-Ray disks by using one of the presets available in Premiere media encoder. Actually using the HDTV 1080i 25 High Quality setting. They playback in beautiful high definition but I think I was just lucky. I would really like to know what determines the setting I should use.
1. I live in Australia so I assume PAL.
2. My camera is a Sony HDV. HCR HC9 1440 x 1080i. I assume this is irrelevant to export encoding settings for Blu-Ray.
3. The export encoder preset has field order set to Upper. I would have thought I should either match the project settings which is interlaced to match my camera and project. OR more likely I should match the audience TV which would be a widesceen plama or LCD TV. I dont know if these TVs are interlaced or progressive. OR is it more a question of what field order the Blu-Ray player expects me to send on the disk?
4. I will play on a TV 1920 x 1080 pixel capable and on slightly lower resoultion widescreens. The encoder preset is for 1920 x 1080 so I assume that's ok for all widescreen TVs even lower definition ones.
As you can tell I am a learner. Any suggested links to basic reading on the subject would help me.
Robert
PS Put this item in wrong forum previously.

Since no response I've been searching and found the following.
When encoding to make a Blu-Ray disk from my HDV 1080i footage:
1. Tell encoder the source is 1080i That is interlaced and it's TOP field first for HDV footage.
2. Tell it to encode to 1440 x 1080 resolution. You could tell it 1920 x 1080 but it will take much longer to encode. Will be good but why bother. All BD players will automatically up the 1440 to 1902 full screen.
3. Beware, not all players support BD-R and BD-RE recordable disks.
Seems Panasonic is good. Samsung probably good. Sony and Sharp probably not able to read (yet).
4. All players read MPEG-2 compression and H264 compression. Use a bit rate of 25 Mbps for MPEG-2 encode or 18 Mbps for equivalent result in H264 encode. Can use higher rates. These are minimums for a very good result
5. One pass encode is pretty damn good but use two pass if you have the time to wait for the encode.

I downloaded a ringtone from the AP store. How do I get it into my settings for selection?

I downloaded a ringtone fromAP store. How do I get it into my sounds for selection?

Despite all the snarky and misleading replies you most certainly CAN quickly and easily get a refund for an accidental purchase, and Apple has provided a way to request refunds for exactly this reason.
- Go to your Account information page in iTunes
- Go to your purchase history
- Click "Report a Problem" at the bottom
- Then click "Report a Problem" next to the app you accidentally purchased.
- This will bring you to a browser page with a pull down menu where you can select "Didn't Mean To Purchase This Item".
For the full process with screenshots you can visit this page:
http://www.imore.com/how-request-refund-itunes-or-app-store-purchase
Since Apple explicitly offers the "Didn't Mean To Purchase This Item" in that menu they are obviously well aware of the fact that many such instances occur.
Since they don't have a confirmation screen or pop up a single inadvertent click could easily lead to a costly unintended purchase, and if they didn't offer just as easy a way to get a refund they'd be mobbed with suits.

How to use configurator to lock down settings on the iPad?

Hi All,
I'm pretty new to the iPad / Configurator scene but have grasped the basics on how to deploy profiles etc using configurator. My question is this - I would like to be able to lock the 'settings' feature to not allow general user access without a passcode @ least, is this possible?
In an educational environment i would really like this to be done because we all know how tech savvy students are now!
Sorry if this has been asked before but after an hour or so of searching, i've given up
Thanks,
Dave

The ipad is still a personal device. A knowledgeable student can delete configuration profiles hence all associate apps and settings. you will want a standard restore image to fix the device.
Use VPP. Select an MDM. Read the google doc below.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
http://www.apple.com/education/resources/information-technology.html
   business site is:
   http://www.apple.com/lae/ipad/business/resources/
Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0
Educational institutions in the USA can use the App Store Volume Purchase Program (VPP) to buy Apps.
https://support.assistiveware.com/index.php?pg=kb.page&id=54
There are three ownership models:
    *     Personal
    *     Institution
    *     Layered. combines personal & institution.
Watch this apple video on layered ownership. It education based, but that's OK.
http://www.apple.com/education/resources/videos/#ios-layered-ownership

How can I configure FireFox security setting globally for all users on a PC? Is there something I can do in group policies or throught the registry to insure all users have the same settings?

Our Bank's core processor has rewritten their product to run in a web browser. Their browser of choice is Firefox 3.6. The specifications from our core processor specify specific security and settings parameters that must be adhered to by all users for their product to run properly. Is there a way to globally configure these settings via the registry or group policies to insure everyone who logs in to a given workstation opens Firefox with the same settings? Thank you for any assistance you can provide - Steve Gish, First Bank Kansas.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You can try:
*http://kb.mozillazine.org/Locking_preferences

How can I configure a slightly different initrd for lts kernel ?

Hi,
Because of the uas problem with my external usb3 harddisk (see uas problem in linux 3.15.1, need advice on the problem), I needed to add a quirk file: /etc/modprobe.d/ignore_uas.conf
It works fine with the standard kernel, but with the lts kernel, it causes systemd-modules-load.service to fail. I think it is because the lts kernel does not know this quirk.
Is there an elegant way to make mkinitcpio ignore this file for the lts initrd by configuration ?
I really do not want to remove / re-add this file every time one of the kernels is updated. Or when both kernels are updated at once, I do not want to remove it, create the lts initrd once more manually, then re-add it ...
Thanks and Regards,
Markus

OK, back to topic :-)
I just did a bit of research about /etc/mkinitcpio.d/ (indeed, I already have two .preset files), but I could not find any information about excluding files from /etc.
Maybe I should have asked about how to exclude files in general.
What I found out is that the files from /etc/modprobe.d are added by /usr/lib/initcpio/install/modconf.
My current idea is to copy it to /usr/lib/initcpio/install/modconf-lts and change it a bit.
But here comes the next problem: For this solution, I would need tow different hooks lists for the standard and the lts kernel. But te hooks list is configured in the global /etc/mkinitcpio.conf, not in the preset files.

In Multimapping how can we configure the Receiver , Interface Deter for BPM

Hi Friends ,
I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
The steps Which i have followed in BPM are
1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
Block Start and Block End as New Transaction
2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
3. Transformation Step
It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
4. Send Step
It sends the New Message . It creates the New Transaction .
Can you Please tell me how to configure the Receiver and Interface Determination for the above scenario ?
Regards.,
V.Rangarajan

Hi Ranga
have a look at these
you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm
if useful pls reward

How to specify 2 conditions in when settings for 2 items in dynamic actions

Hi,
How to use 2 conditions for 2 different items in Page rendering ->dynamic actions-------when event settings
Actually i have three items like A nd B nd c
If A=v,x,y,z and B=k,l............ i need to set some content like
"werttyyyy" in c and i need to make it as disable
if A=v,x and B=k ..................
i need to enter the text in c which i would like to be freetext and i need to make it as enable now
here it is i struck ------------Page rendering ->dynamic actions-------
when
event
change
select type
items
items
a,b
condition
<<<<<< how to mention my condition in tis column>>>>>>>>>>>>>>>>>>>>>>>
Regards,
Pavan

Hi JTan414,
I have check the expression you have provided and there are many incorrect using of this expression, please check and do some modification as below:
For the MonthName function you should follow the grammar like:
=MonthName(10,True)
=MonthName(Month(Fields!BirthDate.Value),False)
="The month of your birthday is " & MonthName(Month(Fields!BirthDate.Value))
You have add the dataset name "DealStarts" at the wrong place, it should like below:
=Last(MonthName(Month(Fields!BirthDate.Value)),"DealStarts")
or
=Last(MonthName(Fields!IntegerValueField.Value),"DealStarts")
This will return the last value from the dataset
There is no function named launchdate, expression "launchdate ("RowofTrendingVisibility")" is incorrect and you shouldn't add the datasetname in this way.
If the expression involved of conditions from two different datasets, limit kinds of functions will support to use:
=Last(Fields!BirthDate.Value,"DataSetName")
=First(Fields!BirthDate.Value,"DataSetName")
More details information about how to use expression in SSRS:
Expression Examples (Report Builder and SSRS)
If you still have any problem, please try to provide more details information about your requirements and also some sample data.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to correctly configure send and receive connectors for SBS2011 exchange to connect to EOP

Hello SBS fans,
we have a customer with SBS2011 and exchange. The server email is setup for Exchange Online Protection.
It passes the Remote Connectivity Analyzer for inbound and outbound email. It shows a warning for the spf, saying it cannot find the spf record, BUT MXtool box passes everything associated with their domain name, including the spf record.
They are now getting some bounced email from yahoo servers, referencing this ip
65.55.169.249, which is a valid Microsoft ip.
I checked the bounce back email header carefully, and found a reference to an internal ip, 192.168.11.14, which just happens to be the ip of the user's desk PC!! - NOT the local addr of the sbs2011 server (which should not be there anyway)
I will guess that there is an incorrect setting in one or both of the hub transports? There is a correct smart host connector.
I am no longer sure about the other connectors!
Any ideas on this?
ewholz
Network and Server Installs

Hi,
à
It shows a warning for the spf, saying it cannot find the spf record
Would you please let me know the complete warning message that you can get? Meanwhile, would you please let
me know how long ago you add the SPF record? Be
more than 72 hours?
Please also refer to following article and check if can help you.
Configuring
Exchange 2007 Hub Transport role to receive Internet mail
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How do i configure an srw224p IGMP settings for an HMDI over IP pair?

Similar Messages

Maybe you are looking for