How do i configure my 2575 aio printer so that i can calibrate color?

I had been having problems with my 2757 all-in-one printer (printing photos too light and colors a little off according to what I was seeing on my monitor) and in an attempt to correct the problem I went into the printer toolbox and clicked on calibrate color. After doing so the colors are all wrong and I can not undo what I have done. When I try to redo, I most of the time get a message "The service you have chosen is not applicable for your current configuraton". Occassionally (yes, I have tried multiple times) it will allow me to start the calibrate color process, but will only shoot out a plain piece of paper without printing anything on it. How do I fix what I have done? I have tried setting everything back to factory settings but that had no effect either. HELP!!!!!!!

I don't know if this document might help or not, but there is good information here:
http://www.hp.com/united-states/consumer/digital_photography/print_better_photos/tips/printer-settin...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

How do you configure the ipad to print air print but of A4 size please ??????

how do you configure the ipad to print air print but of A4 size please ??????

Frankie,
The usual setting is in Printing Preferences.
In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
I can provide details and "how-to" if you need more help.
Printer model info would be helpful, and do you have your printer software loaded yet?
I hope this helps!
We work hard to help!
When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Dragon Tips!
Install your Printer Software!
Look for your Printer’s Software at your printer’s own website!
Software, manuals, alerts, “how-to” information, and much more!
To see if there is software for your printer, Start at: Support and Drivers
Kind Regards,
Dragon-Fur

How do I get back my Tools menu so that I can add Joliprint or some other print utility?

I would have never upgraded to FF 3.6 had I known what waited for me. However, I now have and need a print utility so that I can print in pdf website articles in which I am interested. How do I get back my bookmark toolbar so that I can add Joliprint to it?

The Tools menu item is on the Menu bar. See this: <br />
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

How do i add acrobat to my printer list so i can create a pdf file. Mac 10.6.8?

How do i add acrobat to my printer list so i can create a pdf file. Mac 10.6.8?

Good day,
Beginning w/ the release of Mac OS 10.6.8, the process to create PDF files with Acrobat changed. The Adobe PDF Printer no longer exists. To create a PDF using Acrobat, please refer to the instructions in this document: http://helpx.adobe.com/acrobat/kb/cant-print-pdfs-mac-os.html
-David

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed.

I've downloaded the Creative Cloud, once completed the creative cloud window pos up with spinning whell in center then the entire window disapears. How do I get it to remain open so that I can download programs needed

right click the executable > click 'run as administrator'.

I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

Settings > wi-fi then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
Now at the top tap on "forget this network".
After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

How to add a checkbox to dynamic itab so that i can select some records

How to add a checkbox to dynamic itab so that i can select some records in the alv and can display them in another alv using a button
I have requirement where i have to display the dynamic itab records in an alv ....Some records from this alv output has to be selected through checkbox provided in the first column .( I will get to know the structure of the itab only at runtime ,so iam using dynamic itab)

Hi,
   I tried and finally i got it , Just try for it.
type-pools : slis.
PARAMETERS : p_tab type dd02l-tabname.
data : ref_tabletype type REF TO cl_abap_tabledescr,
       ref_rowtype TYPE REF TO cl_abap_structdescr.
field-symbols : <lt_table> type   standard TABLE ,
       <fwa> type any,
       <field> type abap_compdescr.
data : lt_fcat type lvc_t_fcat,
       ls_fcat type lvc_s_fcat,
       lt_fldcat type SLIS_T_FIELDCAT_ALV,
       ls_fldcat like line of lt_fldcat.
data : ref_data type REF TO data,
        ref_wa type ref to data.
ref_rowtype ?= cl_abap_typedescr=>DESCRIBE_BY_name( p_name = p_tab ).
TRY.
CALL METHOD cl_abap_tabledescr=>create
EXPORTING
    p_line_type = ref_rowtype
receiving
    p_result     = ref_tabletype.
CATCH cx_sy_table_creation .
write : / 'Object Not Found'.
ENDTRY.
*creating object.
create data ref_data type handle ref_tabletype.
create data ref_wa type handle ref_rowtype.
*value assignment.
ASSIGN ref_data->* to <lt_table>.
assign ref_wa->* to <fwa>.
loop at ref_rowtype->components ASSIGNING <field>.
ls_fcat-fieldname = <field>-name.
ls_fcat-ref_table = p_tab.
append ls_fcat to lt_fcat.
if lt_fldcat[] is INITIAL.
    ls_fldcat-fieldname = 'CHECKBOX'.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
    ls_fldcat-seltext_m = 'Checkbox'.
    append ls_fldcat to lt_fldcat.
endif.
clear ls_fldcat.
ls_fldcat-fieldname = <field>-name.
ls_fldcat-ref_tabname = p_tab.
append ls_fldcat to lt_fldcat.
endloop.
loop at lt_fldcat into ls_fldcat.
if sy-tabix = 1.
    ls_fldcat-checkbox = 'X'.
    ls_fldcat-edit = 'X'.
modify lt_fldcat FROM ls_fldcat
    TRANSPORTING checkbox edit.
endif.
endloop.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog           = lt_fcat[]
IMPORTING
    ep_table                  = ref_data.
assign ref_data->* to <lt_table>.
select * FROM (p_tab) into table <lt_table>.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   IT_FIELDCAT                       = lt_fldcat[]
TABLES
    t_outtab                          = <lt_table>.
Thanks & Regards,
Raghunadh .K

I purchased movies through Apple TV at home. I then signed in to my itunes account on my ipad and the movies show up but they are listed as only accessible via icloud. How do I download them to my ipad so that I can view them on an airplane?

I purchased movies via Apple TV. I want to view them on my ipad. I signed in to itunes and see them on my ipad but they are only accessible via icloud. How do I download them to my ipad to view where there is no WiFi?

Hi there apearsal,
Welcome to Apple Support Communities.
It sounds like you’ve purchased movies with your Apple TV and want to know how to download those movies to your iPad, so that you can watch them later without a Wi-Fi network connection. Take a look at this article, it’ll walk you through the process of downloading purchases:
Download past purchases - Apple Support
Ciao,
-Jason

HT201269 My old windows computer crashed and I had to buy another one. I rescued my itunes file off of the old one and installed it on the new desktop. How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be rec

My old windows computer crashed and I had to buy another one. I rescued my itunes file off of the old one and installed it on the new desktop. How do I get itunes to recognize it so that I can get all my old music (mostly burned CD's) to be recognized

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on?

How do i save my document on pages so that i can open it on other computers

How do I sav emy document on pages so that i can open it on other computers?

Well, that was the short answer, then I rethought your question.
Will the “other computers,” be Mac, or a mixture of Mac, Windows PC, and possibly Linux?
What application on the other computers will be accessing the Pages content created on your MacBook Pro?
Using the File export options I originally mentioned, you could save the files to iCloud. Then on the other computer, you use the web browser to sign into your iCloud account. When you click the iWork icon, the files that you saved from your MBP will be there. You can then right-click on the file you want and a download option exists.

How to I update to a 7.0 so that I can add the iBook app to my ipad

How do I update to a 7.0 so that I can add the iBook app to my iPad

What generation iPad do you have?
The First generation iPad cannot be updated past iOS 5.1.1
However you should be able to get the last compatible version of the iBooks App by tapping on the install button.
You might need to download first to a computer running itunes or a device that can take the newest version before you will get the option for the last compatible version.
http://www.engadget.com/2013/09/17/apple-ios-last-compatible-version-app-iphone- ipod-ipad/
http://appleinsider.com/articles/13/09/17/apples-ios-app-store-now-offers-last-c ompatible-versions-of-apps-for-older-devices

I am trying to copy my itunes music library and download it into my adroid phone. How do I get my library into a file that I can dump into my H disk?

i am trying to copy my itunes music library and download it into my adroid phone. How do I get my library into a file that I can dump into my H disk?

Right-click any song in iTunes, show it in the Windows Explorer, navigate up to the iTunes Music folder, and drag it there.
(91872)

How do I set up a rating scale so that respondents can only select each option one time?

How do I set up a rating scale so that respondents can only select each option one time?

hi there,
in the LV VI, function & how-to help open the item
Building the front panel -> Front panels controls and indicators -> Array & Cluster controls and indicators -> Arrays -> Tabbing through Elements of an Array or Cluster
or see attachment
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
TabbingThroughArrays_Help.jpg ‏96 KB

How do i configure my 2575 aio printer so that i can calibrate color?

Similar Messages

Maybe you are looking for