How do I configure my AirPort Extreme to allow printing from my Macbook to an HP PSC 1210?

I currently have an AirPort Extreme [model A1354] connected by cable to an iMac [3.2 GHz i3 / 10.6.7]. I have an HP PSC 1210 series "All-in-one" printer attached to the USB port on the AirPort Extreme. Printing from the iMac works just fine.  However, I cannot print from my Macbook [ 2.4 GHz Intel Core Duo / 10.5.8]. While the printer shows up when I go to "Add a printer", I still cannot print to the printer.  When I hit print, the print window closes, but nothing prints.

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.  
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try. 
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule 
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Similar Messages

  • How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
    I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

  • How do I configure my AirPort Extreme as a wireless access point?  My cable modem goes to a router, and one of those ports goes to my AirPortExtreme.

    I am about to hook up my airport extreme.  My cable modem goes into a router, and one of those ports will supply my airport extreme.  I was told by the Apple Store that I would need to configure my airport extreme as a wirreless access point.  How do I do this?

    With sbcgobal I got a Gateway 2wire modem. What I would like to know is how do I set up my APE as remote?
    Unfortunately, you won't be able to do this as few non-AirPort routers will work with AirPorts in a Wireless Distribution System (WDS).

  • How do I configure an Airport Extreme base station to receive and distribute a wi-fi network from a broadband wireless router?

    I have recenly upgraded my broadband service and now have a wireless router. My old network configuration was a router connected by ethernet cable to an Airport Extreme base station which then broadcast my wireless network (I also had an Airport Express base staion set up as a wi-fi booster elswhere in the house).
    I now have two networks (my original network and the new network from the wireless router) and wish to amalgamate these into one.
    Ideally I wish to use the Airport Extreme base station as the "remote" booster (I have purchased Powerline adapters for this purpose) but don't know how to configure the Airport Extreme base station in order to to this.
    Can you advise on the best set up for this please?
    My Mac is running OS X 10.8.2 and the Aiport untility is version 6.1.
    Thanks in anticipation.

    The AirPort Extreme should be configured to "create a wireless network" with the same WiFi network name, security type (usually WPA2 Personal) and password as your existing router. It should be configured as connection type Ethernet and be in bridge mode.

  • HELP! How do I configure an airport extreme card , so I can set up AEX base

    Hi
    I have had an iBook for a few years now with an Airport Extreme Card installed but not configured. Have just bought s/h Airport Extreme base station (cone shape) to go wireless, but am having MAJOR probs configuring the AEC to start with so I can set up the base station!
    It is asking me for a Client ID, to set Airport to DHCP?? this means nothing to me...
    How do I configure the card initially??
    Can anyone help, PLEEEASE??????

    purplemouse, Welcome to the discussion area!
    There is absolutely nothing you need to do to configure the AirPort Extreme card. After you install the card and boot the iBook, the OS recognizes the card.
    It is asking me for a Client ID...
    What is asking you for a client ID? This is not a normal prompt. What application are you running?

  • How do I configure my Airport Extreme in Lion?

    I could configure my Airport Extreme using the disk provided when running Snow Leopard. The upgrade to Lion appears to have 'uninstalled' the utility. Now when I try to reinstall it it tells me that it can't install it on the hdd because
    "The version of Mac OS X on this volume is not supported"
    What do I do now?
    Thanks
    Andy

    You should not still be using that disk.  There should be an up-to-date version of the AirPort Utility in the Utilities folder in your Applications folder.  Use that.  If it's not there, there's something wrong.  If it's missing, in Snow Leopard I would have said to use Pacifist to extract that from the installer, but I don't know if that works with Lion's installer or not.

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • I have a HP printer 8600 and airport extreme -- want to print from two computers - does not work

    I just bought HP 8600 -- run Lion -- have airport extreme want to print wirelessly from both computers won't work 

    How are you trying to connect the printer - wirelessly or Ethernet or USB to the Airport?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do I configure my Airport Extreme firewall?

    I seem to remeber configuring a firewall on my Airpot Extreme/Time Capsule when I first set it up.  How do I get into it again to check the configuration settings - The Airport Utility does seem to provide a way in.

    There is no "firewall configuration" on the AirPort Extreme. It provides a NAT firewall but this automatically closes all ports apart from the ones you choose to open.

  • How do I configure my Airport Extreme to work in Bridge Mode and provide specific IP addresses to clients

    My Airport Extreme is working with an Airport Express to wirelessly extend my wireless network.  Both Airports are configured in Bridge Mode per the instructions I found on Apple's support site.  I want to assign a specific DHCP address to a wireless camera that is in range of the Extreme, but I understand that the Extreme needs to be in DHCP Only mode to do this.  But if I change the mode to DHCP Only, the Extreme will lose contact with the Express.  How can I get both functions to work - wireless network extension and specific DHCP addresses?

    Then what device is providing DHCP? Only once device per subnet should be the DHCP server. One should be DHCP and NAT and the other in Bridge mode for most home setups. The unit with DHCP and NAT should be the one connected to your cable or DSL and the other set in Bridge mode only extends your network.
    On the wireless config page set whichever you're using to extend your network to "Extend a wireless network" and give it the details of the network to which you're attaching it.

  • Airport extreme blocking port 25 from my macbook pro

    My airport extreme is not supporting port 25 from my macbook pro, only product in my residence that port 25 is not supported. (iPads, iPods, macbook air)

    I believe I understand this better now. When I unplug my MacBook Pro from the network including disabling Wi-Fi, then when I open AirPort Utility it of course shows and I am no longer connected to my home network on the MBP. All the other hardwired or Wi-Fi connected computers, printers, hard drives and iPads are still connected.
    Steve
    6 Jan 2013

  • Airport Extreme won't print from Vista PC

    I have 3 Macs and a Windows XP machine. They all print wirelessly via Airport Express. I can't get my Vista machine to print at all.(It has internet access.) When I open the control panel/printer, it shows the printer as "Ready".
    When I hit "Print" on a word doc a dialogue box shows the status of the printer as "Idle", the same as on the XP Machine. However nothing happens, and the Status shows as "Error - printing". I can print when the printer is connected via USB.
    Apple tech support had no suggestions - other than to check these forums!

    It's probably just an incompatibility. With four computers, I would recommend that your next printer purchase be one that is network-compatible via Ethernet.

  • How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    If you have not already done so, your chances will really improve if you....
    1) Connect the printer to the USB port on the AirPort Extreme
    2) Download and install Bonjour Print Services for Windows on the PC

  • How to configure the airport extreme as wireless bridge?

    how can i configiure the airport to function as a wireless bridge?
    i have connected my airport now with a wire to the modem/router delivered by the local internetprovider (THomson DWG850).
    Since this device has not much reach I want to connect the airport extreme wireless and position in the living room to have better reach?
    or do i need toc hang the settings in the Thomson? does anyone know where to find the admin password of the Thomson?
    thanks in advance
    Eric

    how can i configiure the airport to function as a wireless bridge?
    Sorry, but it is not possible to configure the AirPort Extreme for this type of setup. You will need to connect the AirPort Extreme to the Thomson router using an Ethernet connection.
    does anyone know where to find the admin password of the Thomson?
    Google turned this up in 5 seconds. There may be others if you look.
    Thomson default passwords

  • How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    How do I setup my Airport Extreme so that I can extend the coverage of my existing AT&T wifi network?

    Start by establishing a permanent fixed Ethernet cable connection from one of the available LAN <-> ports on the ATT modem/router to the WAN "O" port on the AirPort Extreme.
    Ethernet cabling can be run up to 300+ feet or 100 meters, so you should be able to locate the AirPort Extreme exactly where it will be needed to provide more wireless signal coverage.
    Configure the AirPort Extreme to "create" a wireless network using exactly the same wireless network name, same wireless security setting, and same wireless network password that the ATT wireless is using.
    The final step is to insure that the AirPort Extreme is configured to operate in Bridge Mode, so it will work correctly with the ATT modem/router.
    If you need more specific steps, we need to know what operating system you are using on your Mac or PC. If you have a Mac and do not know which operating system it is using.....click the Apple icon in the upper left corner of the screen and then click About This Mac, and post back with the OS X version number that you see there.

Maybe you are looking for

  • Error in Privileges of OracleSystemUser in OBIEE 11g

    Hi, We are encountering an error with OracleSystemUser. The policy referenced by URI "oracle/wss_username_token_client_policy" could not be retrieved as connection to Policy Manager cannot be established at "t3://servername:7001,servername:9704" due

  • Trying to share a usb hard drive, what am I doing wrong?

    Okay, finally got myself the new airport extreme. Plugged in all the cables, installed the software supplied on cd, ran the software update and installed the necessary updates. Then turned on the airport extreme, waited for the status LED to go green

  • Is there a completely reliable method of adding months to a date in ABAP?

    Does anyone know of a completely reliable and consistent ABAP function module that can be used to add months to a date.  One that will always get the correct last day of the month when requested to add 1 month to the last day of the previous month. 

  • Importing problem from Photoshop Album 2 to PSE7

    I have just upgraded from PSA2 to PSE7. Importing most of my pics and tags went without a hitch. But a couple of years ago I did a backup of PSA2 and moved most of my pics to a DVD. PSA2 then showed a small thumbnail of the pictures and a small disc

  • Change the name of the pdfs generated during Bursting

    Hi experts, Good morning. I need a help on report bursting. I am bursting a report with desination as Email. Everything works fine. I need to change the name of the attachement(pdf) is it possible. Is there any setting where I set the report name as