How do I configure my airport utility for port mapping?

I am trying to view my FOSCAM cameras over the internet while away from home. They work fine in my house using Wi-Fi. Instructions say to do port forwarding. I have cameras set up, but can't get my router to port forward. I found "Port Forwarding" in Airport Utlility then NETWORK. 'Router mode: DHCP and NAT';on 'Port Settings I click on the "+" at the bottom. 'Private IP Address: populates to 10.0.1.201'. What goes in the other blocks?

Please check out the following AirPort User Tip for details on how to configure Port Mapping on the AirPort routers. I would suggest that you check your FOSCAM documentation as to what TCP and/or UDP ports are required to access their IP cameras from a remote location.

Similar Messages

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

    David Why? wrote:
    ... How do you configure older Airports in OS X 10.7.5??
    Use the technique described in this thread: I can't install airport utility 5.6
    Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
    I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
    Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
    Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

  • How can I download airport utility for my windows computer?

    I have been unable to find the airport utility to download it. I can not, for some reason, get the download window to load. It just sits there with a spinning wheel in the center of the screen. Where can I find the airport utility for the new airport extreme?
    Thank you for your help.

    The most recent version of AirPort Utility is AirPort Utility 5.5.3 for Windows
    If you are having trouble downloading this, Apple has just introduced a number of new Mac updates, so it is possible that the servers may be temporarily overloaded.

  • How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

    OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
    I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

  • How do i configure my airport to work with my other wireless router

    how do i configure my airport to work with my other wireless router? I want to be able to listen to itunes through my speakers wirelessly.

    Please check out the following Apple Support article for details on the many methods to use an AirPort Express for iTunes streaming.

  • Airport Utility for Windows fails during install

    I downloaded the latest driver for the airport utility for Windows 7.   Ran the exec and during the install had a failure on some file that didn't get installed.
    Have all firewalls down.  Utility comes up but doesn't find my airport extreme.

    Thanks.  Tried the hard wire approach and the utility didn't find it.   Did the config other and it was found.  So the unit is there but the utility can find it which is what I need in order to connect the shared drive to my windows 7 system.
    The airport base station agent is running and configured but I never get a prompt to enter the disk password.
    Nice clue about using the IP to connect.
    I did this via WIFI. Used my iMac to get the IP address.
    The time machine is in bridge mode and connecting through another router to the internet.

  • Airport Utility for iOS on iPad

    Although my Airport Extreme and two bridged AP Expresses are oerating properly, Airport Utility for iOS on any network connected iPads cannot locate any of the Airport devices. The same version of Airport Utility works properly on any iPhones on the network and the Mac version also works.
    I've tried removing, downloading, and re-installing the utility from the iTunes App Store, but the iPads still cannot locate any of the three devices. All it can find is "Internet". I've tried on iPad 2, iPad Mini, iPad Mini 3 and none of them can see the Airport devices. On the other hand, I've tried the utility on iPhone 4s, iPhone 5, iPhone 5s, and iPhone 6 (all iOS devices running iOS 8.2), and the iPhones can all see the Airport devices
    The symptoms are pretty consistent and reproducible. In the past 4 to 6 months, Airport Utiity did work properly on iPad. I'm not certain which version of the app and iOS were current when it worked, because I don't frequently use the app, unless I have network revisions done on my Mac and need to check results later. Tonight, I did use it because I have a malfunctioning IP camera. I scanned the network with a third party network scanner/sniffer on iPad and it confirms that the network is intact.
    Basically, it's not iPad specifically, but it appears to be the Airport Utility running on iPad only, that has a problem locating the Airport devices. It seems to be a bug in the Airport Utility for iOS, as used with iPad. Has anyone else observed this?

    I have never seen it either.. I have no problem with the ipad to discover any airports in my network.. and there are loads of them.. nor seen people reporting it as an issue.. but you have sure got something interesting happening.. what version Extreme is it?? Do you have something unusual in the setup?
    If you are really brave or foolhardy.. save the existing setup.. and reset the main extreme to factory and redo the setup from the ipad.. I am pretty sure it will work as long as it gets first bite at the apple. (no pun intended).
    Keep all names short, no spaces and pure alphanumerics.. same for passwords but can be longer.. ie names <10 is good.. passwords 8-20 characters. Mixed case and numbers.
    I do notice that Airport Utility in ipad does behave differently (only slightly but it is there) cf the iphone. Some functions are missing in the phone version.. so I guess with the bigger screen the utility adjusts to how it works.

  • How can I configure an airport express to connect extra speakers to those on my Apple TV?

    Hi,
    I'm using a net gear router to play music on speakers connected to my tv via Apple TV. I want to set up another set of speakers upstairs mot play the same music throat the house. Can I connect another set of speakers to the airport express and have all speakers running in harmony? any advice gratefully received!
    Cheers, Dean

    You can connect (up to five practically) AirPlay Speakers and stream to them simultaneously from a single iTunes host. Your Apple TV would be one of those AirPlay Speakers.
    Each additional AirPlay Speaker would be configured to join the existing wireless network. For additional details on configuring an AirPort Express for AirPlay, please see the following Apple Support article.

  • Since I upgraded to Lion 10.7.2, my external HD is no longer visible in AirPort utility (in the AirPort disks tab). I also installed the AirPort utility for iOS5, it reported a disk problem, but running Disk Utility on the Mac showed no issues. Help!

    To expand on the question, I have performed the following steps:
    1 - Unplugged external drive (1TB WD MyBook) from the Time Capsule
    2 - Reconnected it. At this point, AirPort utility for iOS5 reported a problem with the disk (Time Capsule light was blinking Orange)
    3 - Unplugged external drive, connected it to MacBook Pro, ran Disk Utility. It found no problems (disk visible straight away on the MacBook Pro).
    4 - Reconnected to Time Capsule - still doesn't show up under the "Disks" option under Air Port utility. Or rather, the hardware is visible (i.e the physical disk) but not the volume.
    5 - I tried another external hard drive, and the volume also doesn't appear in the Disk section under the AirPort utility.
    The WD disk is formatted as Mac OS Extended (Journaled).
    This is a big problem for me, as the drive houses my iTunes library.
    Anyone else had a similar problem? It all worked flawlessly until last week.

    I love computers.
    Have managed to fix this already. Been working the issue for a few days now, and a few minutes after writing the above post I decided to reset the Time Capsule to factory default settings.
    After entering all my details again (used same network names, passwords etc) the Time Capsule was rebooted. When it came back on line - guess what? Yep, the MyBook WD drive is now visibile. I can connect via the network from my other machines to the drive, and iTunes is back.
    So - thought I would post my resolution in case it helps others.

  • Airport utility for iPhone question...

    Hi,
    The airport utility for my iPhone does not show the client list, the utility on the iPad does show the
    Client list... Am I holding it wrong?
    Jerry

    Access to the DHCP or Wireless client lists do not seem to be an available options with the iPhone/iPod Touch version of the AirPort Utility.

  • Error when opening Airport Utility for Windows XP

    Help! I have recently purchased and Airport extreme base station and the supplied Airport Utility software will not open. I am operating on Windows XP pro, and have installed the latest software updates to no avail. Is there an older version or perhaps an oblique solution to run the utility software?
    Thanks.

    Hello jleo325. Welcome to the Apple Discussions!
    Here are the links for the last two versions of the AirPort Utility for Windows:
    o AirPort Utility Setup 5.3.2 for Windows
    o AirPort Utility 5.3.1 for Windows

  • Airport Utility for OSX 10.10.2?

    Hello.
    I have Airport Utility for Windows...
    I have a Mac Book Pro and would rather use Airport Utility here. I downloaded AU latest version and it says it's not compatible with my OS version.
    Is there a proper version for Yosemite, or do I need to use a Windows machine to manage my Apple hardware?
    Help!
    R

    You already have the most up to date version of AirPort Utility installed on your Mac using Yosemite (10.10.2)
    Open Finder > Applications > Utilities > AirPort Utility

  • Need airport utility for pc

    bought airport extreme.  told to plug in modem and it would work....do i need airport utility for pc

    The link that Nachos Libres provided will only work if you have Windows 7 on your PC.
    If you are running XP as your profile indicates....and it must be XP SP3.....you need to download and install AirPort Utility 5.5.3 for Windows

  • How do I configure itunes to look for my Outlook contacts and calendar?

    Being fairly new with the iPhone, how do I configure itunes to look for my Outlook contacts and calendar?  At the moment,when I try to sync, I get the "No supported calendar application can be found" message.  Thanks!

    You could try uninstalling iTunes and all of its components as by following this guide: http://support.apple.com/kb/HT1923, then reinstalling iTunes.  This will replace a potentially corrupt Outlook plugin.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

Maybe you are looking for