How do i configure my WRT160Nv3 as a switch/hub

As the title say's i need to configure my WRT160Nv3 to act as a switch instead of a DHCP router and whatnot. My Cable company provided us with a free wired and wireless router that is better than this one, but alas i need more cabled ports, and would like to have everything on the same network.
Current LAN DHCP server is 192.168.0.1
Linksys WRT160Nv3 is 192.168.1.1
I have disabled DHCP. but that is it if anyone could help me figure this out i would greatly appreciate it.
**** summary ****
I would like everything to be accessable and on the same IP set 192.168.0.***
for home networking and file sharing etc.
-Jon T

Set the LAN IP address of the WRT160N to 192.168.0.2 and disable the DHCP server. Then wire one of the LAN ports of the WRT to your cable router.

Similar Messages

How can i configure hsrp in cisco 3850 switch please guide me

how can i configure hsrp in cisco 3850 switch please guide me

Hi Mauleshg,
Please the below mention link to configure Hsrp hope this will help you.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/ip/configuration_guide/b_fhrp_3se_3850_cg/b_fhrp_3se_3850_cg_chapter_010.html
Br.
Mohseen Patel

How do I configure the Airport utility to allow more than one rule per port?

How do I configure the Airport Utility (AU) to allow more than one rule per port?
I am on a home network, with broadband cable modem. I have my airport extreme connected to the broadband modem. I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols. The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists".
I need to be able to allow SSH on both of my servers, for instance. Am I missing something? Is this doable with AU?
Thanks for any insight.
Khalid

The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
What you won't be able to do is map a single or multiple ports to multiple IP addresses.

How do i configure the usb port on a draytek vigor 2820n router for use with my imac

i have an imac connected to the internet through a draytek vigor 2820n router. this router has a USB port with a HP Deskjet 5560 printer attached (for use as a network printer for other machines on the network). How do I configure this printer on the iMAC?

I checked on the HP web site. Your aswer is on the HP website under your printer type. Update your drivers and follow the instructions given by HP and the printer will work as you have it connected.
Good Luck

Fedora 13: After upgrading from FF3.6 to FF6.0.2 I no longer have a Java plugin. How do I configure the Java Plugin for FF 6 ? There is no Java Plugin at the site

I am Fedora 13x64 bit. I just installed FF v6.0.2 from the FF download site. I backed up the existing FF 3.6 as firefox_old
I need to have a Java plugin to access company site, how do I configure the Java Plugin ?
At the Plugin area in FF6 there is no Java Plugin available, even after a search.
I have Java 1.6.0 installed in the OS at:
/usr/lib/jvm/java-1.6.0/jre/lib/amd64/libnpjp2.so
I googled how to configure Java Plugin for FF 6 for Fedora 13 and the trick was to create a soft link from /home/<userID>/.mozilla/plugins to the above libnpjp2.so

AVtech wrote:
. . . If a person can't get an answer here I don't know where else to turn since Sun certainly wouldn't offer tech support for a free product . . .These forums are user forums, and only occasionally visited by Sun employees. Sun does provide Java technical support options, although (of course) at a charge.
See:
http://developers.sun.com/services/
. . . I guess we'll just use JRE 5 until it's unsupported, whenever that will be. I'm still waiting for an answer on that question, too. See:
http://java.sun.com/products/archive/eol.policy.html
http://www.sun.com/service/eosl/
This document (part IV and Appendix) has some debugging and troubleshooting information that may allow someone involved in the problem to resolve the cause:
See:
http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/contents.htm
Any steps that you can take to isolate the problem to specific Java versions, browsers, applets, web sites, operating systems (and versions), etc, would enhance the possibility of getting help.
You can try the applets at this Sun location and see if any of them are "slow".
See:
http://java.sun.com/javase/6/docs/technotes/samples/demos.html

How do you configure a farm name in RDS 2012?

I understand Remote Desktop Services has undergo some drastric changes.
How do you configure a farm name in RDS 2012? Or is the concept around farm name changed in another concept?
Although I have imported a certificate on the RDCH withe the farm name I want to use. When I click on a RemoteApp on the RD Web Access portal, it does not connect to the right farm name.
Boudewijn Plomp, BPMi Infrastructure & Security

You don't. You create a collection. A client connects to the Connection Broker and then is redirected to the collection it is connecting to. The collection name is embedded in the connection file that the client downloads from RDWeb or
the RDWeb feed.
A collection is basically at least one RDSH server (for session based desktops) or one virtual machine (virtual machine based desktops).
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

HT4623 please help!! how can i configure my iphone 3gs because i've been updated a new version i did it but it's hard to activate it again.

please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
"We're sorry, we are unable to continue with your activation at this time."

You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

On the Mac in System Preferences > iCloud
Make sure Mail & Notes is selected.
ON the iPhone tap Settings > iCloud
Make sure Mail is switched on.
And try restarting your Mac and iPhone.

How do I configure DW to open and load a file?

I have DreamWeaver CS5 running on a Mac. Whenever I double-click to open a DreamWeaver compatible file (such as an HTML file), if DW is not already open, DW launches but does not load the file. Once DW is launced, I can double-click the file and it will load. How do I configure DW to open and load a file together?
DW: v11 b 4993
OS X: 10.7.4 (11E53)

HTML files are normally configured to open in a browser. The default on a Mac is to open the file in Safari.
You can right-click the filename in the Mac Finder, and select Open With > Dreamweaver CS5 from the context menu.
Alternatively, select an HTML file in Mac Finder, and press Cmd+I to open the Info panel. In the Open With section, select Dreamweaver CS5 as the default program, and click the Change All button.

How-do-i-configure-guest-wifi-access-using-2504-wlc-fortigate-utm-l3-device

Dear All
I have a 2504 Wireless Controller with multiple radios attached. I currently have a "private" WLAN configured (taking ip from windows server based DHCP of Range 192.1681.0/24 ) and working, but I need to add a Guest/Public WLAN which should take the IP from Other DHCP Configured on Fortigate UTM of range 172.16.0.0/24.
We have one SG300 switch in the office and the rest are basic switches.
Our firewall/router is a Fortigate UTM 240D
Find the attached network diagram for the issue.
Is there a SIMPLE way to enabling guest access that doesn't require VLANS (or are VLANS easier than I'm making them)?
Thanks.
- See more at: https://supportforums.cisco.com/discussion/12473186/how-do-i-configure-guest-wifi-access-using-2504-wlc-fortigate-utm-l3-device#sthash.aj1XcWI0.dpuf

Complete these steps in order to configure the devices for this network setup:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html
Configure Dynamic Interfaces on the WLC for the Guest and Internal Users
Create WLANs for the Guest and Internal Users
Configure the Layer 2 Switch Port that Connects to the WLC as Trunk Port

How can I configure one of the gateway NI9792 Ethernet port to communicate with a cRIO PAC ?

Hi NI Engineers,
I intend to use my gateway NI9792 the following way:
1. One Ethernet port for network connection. That's how I'll develop it, download software and monitor my application through my PC at my desk.
2. Can the other port be used to communicate with a cRIO device? If so, how can I do it?
It seems to be a stupid question, but I truly could not work this out!
Thanks in advance,
Luiz
"Together we stand, divided we fall..."
Certified LabVIEW Associate Developer
Solved!
Go to Solution.

Good afternoon, Luiz
Follow the first link to guide which module can be used and other links to the best part of bore configuration CRIO. Any questions please contact us.
How Do I Configure My Time Server on the NI WSN-9791 or NI 9792 Gateway?
http://digital.ni.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument
NI WSN Product and Configuration Guide
http://zone.ni.com/devzone/cda/tut/p/id/8710
Configuring the Dual Ethernet Ports on Real-Time Controllers
http://digital.ni.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument
video setup and installation CRIO
http://www.ni.com/swf/demos/us/crio/outofbox/
Automatic Network Configuration for cRIO-9073 and cRIO-9074 CompactRIO Controllers
http://digital.ni.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument
Sincerely,
Mauro Vera.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

How Do I Configure A WRT54G to Work With A Cisco 2800 Router

I'm helping my dad set up a new network. He has a Cisco 2800 series router that connects to the internet via two T1 lines. From this connection, he supplies internet service to his customers. The router was installed and configured with help from AT&T who monitors the router and advises my dad if there are problems.
The Cisco 2800 is not my reason for posting.
He wants to connect his home computers to the 2800. He has one desktop and two wireless laptops and wants to use a WRT54G to connect those computers to the 2800 router. How should he configure the WRT54G to connect to the 2800?
Thanks!

That's what I thought. So it is really no different than connecting the WRT to a DSL modem or cable modem as far as the setup goes. Good then.
Now, next question;
Would this network setup be correct?
Connect a 5-port switch to the 2800
Connect the WRT54G to the 5-port switch.
Configure the laptops to connect throught the WRT54G.
Connect the desktop (Ubuntu 9.10) to the 5-port switch via Ethernet cable (bypass the WRT54G).
Would there be IP conflicts or domain problems? I ask this because this is how his LAN is presently setup and he seems to be getting random connectivity problems on his Ubuntu desktop machine. One day it works fine. The next day it won't connect. Sometimes, even after he is connected, it stop works midstream. It also takes 10 minutes or so to boot up. The laptops always work without issue.
The two laptops would be issued IP addresses of 192.168.1.xxx but the desktop would be getting 12.83.xxxx.xx(something similar). The desktop's internet IP would receive its internet IP from the 2800 via DHCP just like the WRT54G is receiving its IP from the 2800. The two would essentially be on different LANs connected to the same router. Do you forsee any issues here?
Thanks!

How do i configure my WRT160Nv3 as a switch/hub

Similar Messages

Maybe you are looking for