How do I configure Presenter 9 to recognize cam?

I'm using my Android phone (Samsung 3) and IPWeb app which sends the video stream over wifi to my desktop via a port. Works great, but Presenter doesn't see a camera connection. Thanks for your help in advance!

Hi,
Please download ipVideoSource msi from this link -> http://alax.info/blog/1216 .
Make sure to download x64 version, if you have 64 bit Video Creator and likewise for 32 bit.
You have to add a new video source and provide the video stream URL. After that you will be able to see the IPWeb camera in Video Creator Camera dropdown list. Choose it and start recording. I have seen issue with very small recording duration like 2-10 secs, so make sure you record for make than 30 secs.
This set worked fine for me.
Thanks,
Vikram
Adobe Presenter Engg. Team

Similar Messages

How do I configure Windows 7 to recognize javac as a command?

I can write, compile and run a very very simple java program on Eclipse. When I attempt to compile the same program using the cmd interface, I find that javac is not recognized. So, I change the CLASSPATH, system environment variable to: "C:\Program Files\Java\jdk1.6.0_20\bin\javac" exactly, without quotes. This does not change results. Eclipse must know where to find javac else the program won't compile. Changing the CLASSPATH has no effect of the Eclipse compilation that continues to compile and run! HELP! How do I configure Windows 7 to compile this program using the cmd interface?

Reply #1 is correct. You must not have done it correctly if it didn't work for you. Maybe you got the path wrong.
Or... did you close the console window and open a new one? If you didn't, then you didn't get the new PATH value.
Try that.

How do I configure Time Capsule to recognize my Denon receiver?

Hi all,
New to the forums but have spent the past few days perusing them to no avail - your help is appreciated from a networking newbie!
I have a Denon AVR 2312ci which I'd previously had hard-wired to an old Belkin router. The only hiccup I'd had at the time was the requirement that I disable UPnP. I have an Apple TV that I use to stream music via airplay to the receiver, which works quite well. However, it requires me to turn on the receiver, whereas directing airplay to the receiver itself would "wake on LAN", a feature I like.
Since then, I've upgraded to a 2TB Time Capsule. However, following the router change I am no longer able to find the Denon on my home network, nor do any of the networking capabilities of the receiver work any longer. I tried disabling DHCP on the Denon and assigning a static IP address, but this didn't work. I tested multiple Cat5e cables using various LAN ports on the router - no luck there, either. I tried to reset the network card on the Denon - same result.
I'm beginning to wonder whether the problem lies with the way the Time Capsule is configured - any thoughts or suggestions out there?

LP,
IT WORKS!
To summarize for anyone who might have this problem, here's what fixed it:
1) Time Capsule --Cat5e--> LAN port of router/switch (in my case, an old Netgear 10/100 with DHCP and NAT disabled) --Cat5e--> Denon receiver
2) Through Airport Utility, made an IP reservation for an IP outside of the DHCP range (in my case 10.0.1.2 through 10.0.1.200, so I chose 10.0.1.202). You will need your AV receiver's MAC address to do this.
3) Disabled DHCP on the Denon
4) Manually entered the IP address (e.g. 10.0.1.202), subnet mask 255.255.255.0, default gateway 10.0.1.1 (e.g. the TC's local IP), primary DNS 8.8.8.8, secondary DNS left blank, proxy off
This worked after I left the unit on standby for a period of a few hours (did not immediately work). I did not need to do any port forwarding, DMZ, etc.
I am now able to access the unit from my web browser in my local network and am able to airplay directly to the unit using my other airplay enabled apps/iTunes.
Much thanks to LaPastenague for his very helpful advice!!
KS

How do I configure my AX to serve as an extender for my AE

How do I get my AE to act as a wifi extender for my AX. My current home network is a secure network. My AE has previously been set up to be used as a base station in hotels..1) do I need to reset my AE to use it as an extender? 2) how do I configure my AE to recognize and extend my current secure network? Thanks

Yes, your Extreme is an 802.11n model as well.
The following is the basic steps to configure both for an extended network:
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

How Do I Configure A WRT54G to Work With A Cisco 2800 Router

I'm helping my dad set up a new network. He has a Cisco 2800 series router that connects to the internet via two T1 lines. From this connection, he supplies internet service to his customers. The router was installed and configured with help from AT&T who monitors the router and advises my dad if there are problems.
The Cisco 2800 is not my reason for posting.
He wants to connect his home computers to the 2800. He has one desktop and two wireless laptops and wants to use a WRT54G to connect those computers to the 2800 router. How should he configure the WRT54G to connect to the 2800?
Thanks!

That's what I thought. So it is really no different than connecting the WRT to a DSL modem or cable modem as far as the setup goes. Good then.
Now, next question;
Would this network setup be correct?
Connect a 5-port switch to the 2800
Connect the WRT54G to the 5-port switch.
Configure the laptops to connect throught the WRT54G.
Connect the desktop (Ubuntu 9.10) to the 5-port switch via Ethernet cable (bypass the WRT54G).
Would there be IP conflicts or domain problems? I ask this because this is how his LAN is presently setup and he seems to be getting random connectivity problems on his Ubuntu desktop machine. One day it works fine. The next day it won't connect. Sometimes, even after he is connected, it stop works midstream. It also takes 10 minutes or so to boot up. The laptops always work without issue.
The two laptops would be issued IP addresses of 192.168.1.xxx but the desktop would be getting 12.83.xxxx.xx(something similar). The desktop's internet IP would receive its internet IP from the 2800 via DHCP just like the WRT54G is receiving its IP from the 2800. The two would essentially be on different LANs connected to the same router. Do you forsee any issues here?
Thanks!

How do I configure a Pioneer DVR-XD10 external dvd writer to my macbook pro laptop?

How do I configure a Pioneer DVR-XD10 external dvd writer to my macbook pro laptop?
I read online that you could use an external dvd writer on a macbook pro when the internal dvd writer died.
Please help?
It shows power running through the external dvd writer when I plug in the two usb ends into the respective ports, but it doesn't recognize it when I try to write media to a DVD.
Any help would be greatly appreciated.
Thanks in advance!

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

How do I configure Sprint Mobile Email to show my name in the email return address?

I am using Sprint Mobile Email to check & send my Yahoo email on my Palm Centro. When I send emails it only shows my email address in the return address and not my name. I have my name set up in Yahoo but it doesn't get picked up when I send emails from my phone.
How do I configure Sprint Mobile Email to also show my name in the email return address? Everyone may not recognize my email address as being me.
Thank you
Post relates to: Centro (Sprint)

Hello and thank you for using the Palm Help Forums!
You may want to contact Sprint for further assistance with the Sprint Mobile email. However, I can assist you with the built in Email (Versamail) application.
Post relates to: Treo 800w (Sprint)

How do I configure a counter to generate pulses using DAQmx?

How do I configure a counter to generate pulses using DAQmx?
Is says in the DAQmx C reference help
"CtrnInternalOutput—The signal at this internal terminal is where the pulsed or toggled output of the counter appears. The output of a counter pulses or toggles when the counter reaches terminal count. When counting down, the counter reaches terminal count when the count reaches zero. When counting up, the counter reaches terminal count when the counter rolls over. To configure the counter to toggle or generate pulses, use the Export Signal function/VI with Counter Output Event as the signal name."
I've tried this but can't get it to work, I may have the parameters wrong or something. The DAQmxExportSignal() function is very unintuitive to me. Here is my counter config code...
int ret = 0;
ret = DAQmxCreateTask("",&task_);
errorMsg(ret);
if (ret != 0)
throw ret;
// Configure the counter
ret = DAQmxCreateCOPulseChanTicks( task_, "Dev1/ctr0", "", "/Dev1/PFI8", DAQmx_Val_Low, 0, divider, divider );
errorMsg(ret);
ret = DAQmxCfgImplicitTiming( task_, DAQmx_Val_ContSamps, 1000 );
errorMsg(ret);
// Change to pulse mode
ret = DAQmxExportSignal( task_, DAQmx_Val_CounterOutputEvent, "/Dev1/Ctr0InternalOutput" );
errorMsg(ret);
// Start the counter
ret = DAQmxStartTask(task_);
errorMsg(ret);
The above code works fine, in toggle mode, if I just comment out the DAQmxExportSignal() part.
HELP!!!
Stefan

The problem is due to the DAQmxExportSignal call. By default, when you create a counter output pulse train task, the driver will automatically set the output of the counter to toggle when the count for each high ticks and low ticks expire. The driver also automatically routes the signal present at Ctr0InternalOutput terminal (the output of the counter internal to the device) to the Ctr0Out terminal (the I/O pin available externally). Using the line
ret = DAQmxExportSignal( task_, DAQmx_Val_CounterOutputEvent, "/Dev1/Ctr0InternalOutput" );
will tell the driver to tristate the Ctr0Out terminal and not output the signal to the external I/O pin. Using the DAQmxExportSignal function is generally only useful if you want to route the signal to some other terminal internal to the board without having the output show up on the external connector, route the signal to some other external pin other than the default pin, or if you want to have the output show up at multiple locations.
If you want to change the output behavior from toggle to pulse, you need to use the DAQmxSetExportedCtrOutEventOutputBehavior function. However, this is generally only useful if all you care about are edges (not the duty cycle of the pulse train), and you want to generate higher frequency signals. For example, with a 20 MHz timebase as the source of your counter, you can only generate a 5 MHz pulse train by default. This is because the minimum value for the low and high ticks parameter is 2 (20 MHz / 4 = 5 MHz). By changing the output behavior form toggle to pulse, you can generate a pulse train at 10 MHz since the output is now pulsing instead of toggling. However, the width of each pulse is not programmable so you will no longer have a 50% duty cycle signal. I don't remember exactly what the width of each pulse is, but I believe it's in the neighborhood of 50 - 100 nanoseconds in width. I hope this information helps.

How can i configure STMS with out physical systems

Dear Experts ,
please solve my doubts
here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
and i started some activities also
presently my doubt is in STMS configuration
here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
this is my first implementation Experience please suggest me with some valuable suggestions
my doubts:
while creating systems we need to take for virtual systems or Extended systems
which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
please reply me
Regards

Hi,
If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
Login to the domain controller
Execute tcode STMS
Goto the menu overvie --> systems (Shift+F6)
SAP SYStems --> Create --> Virtual system
Enter the SID and description and then save ur entries.
Now the new virtual system will be created. Do the above for the others systems in the landscape.
Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
Hope this helps.
Regards,
Varadharajan M

What is Retro active rebates and how there are configured

Hi,
What it means by retro active rebates and how there are configured. Please also explain how rebates settlement will happen...
Regards
Sankar

Hi,
Retroactive Rebate Processing:
You can create rebate agreement for which the validity period start date lies in the past. The system takes in to account all the rebate relevant billing documents that were created between the validity start date & the date you created the rebate agreement. In addition to the credit memo request, the system creates a correction sales doc (type B2) automatically for this amount.
Create the rebate agreement in the usual way. The system recognizes that the rebate agreement is retroactive.
Regards,
Raghav

How do I configure my contacts to be shared across multiple emails?

How do I configure my iPhone6 contacts to be shared across multiple emails accounts?

By interface I simply mean connected to the contacts. I have two different gmail accounts, one that uses the apple mail app and the new one that launches from the gmail icon that I downloaded from the app store. The new one doesn't recognize the contacts.

I want my bookmarks file (places.sqlite) to reside on a network drive. How do I configure Firefox to do this?

I want my bookmarks file (places.sqlite) to reside on a network drive. How do I configure Firefox to do this?

You can use the profile manager to create a new profile and choose the location of that new profile to point to the profile folder on that network drive.<br />
Firefox will recognize that profile and use it.<br />
If you do need to create a new profile then make sure to point to a new empty folder and NOT a folder that already has other files in it.
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles

HELP! How do I configure an airport extreme card , so I can set up AEX base

Hi
I have had an iBook for a few years now with an Airport Extreme Card installed but not configured. Have just bought s/h Airport Extreme base station (cone shape) to go wireless, but am having MAJOR probs configuring the AEC to start with so I can set up the base station!
It is asking me for a Client ID, to set Airport to DHCP?? this means nothing to me...
How do I configure the card initially??
Can anyone help, PLEEEASE??????

purplemouse, Welcome to the discussion area!
There is absolutely nothing you need to do to configure the AirPort Extreme card. After you install the card and boot the iBook, the OS recognizes the card.
It is asking me for a Client ID...
What is asking you for a client ID? This is not a normal prompt. What application are you running?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

How do I configure the Airport utility to allow more than one rule per port?

How do I configure the Airport Utility (AU) to allow more than one rule per port?
I am on a home network, with broadband cable modem. I have my airport extreme connected to the broadband modem. I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols. The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists".
I need to be able to allow SSH on both of my servers, for instance. Am I missing something? Is this doable with AU?
Thanks for any insight.
Khalid

The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
What you won't be able to do is map a single or multiple ports to multiple IP addresses.

How do I configure Presenter 9 to recognize cam?

Similar Messages

Maybe you are looking for