How do I configure SPA8800 for a Viking FBI-1A?

I am working with a customer who has had a phone system failure. We're trying to replace the old Asterisk system that had a hardware interface card with a newer system and use an SPA8800 adapter (since I have that in stock and didn't have the hardware card in stock) to provide dialtone to the faxe machines and connect to the overhead paging system. The problem I'm having is with the overhead paging system.
The system is a Viking FBI-1A (http://www.vikingelectronics.com/products/view_product.php?pname=FBI-1A#), which can be configured either in Trunk Mode or Paging Mode. In Paging Mode and connected to one of the FXS ports on the SPA8800, the paging system basically immediately "picks up" the FXS line and blares dial-tone over the overhead speakers, staying continuously off-hook, even after the "you left the phone of the hook, dummy" error beep starts playing. In Trunk Mode and connected to one of the FXO ports on the SPA8800, the paging system never works -- when Asterisk tries to place any call to the SPA8800's FXO port, the SPA8800 replies with 503 Service Unavailable and nothing comes out the speakers. I've done some testing with a plain old analog phone connected to the Viking in Trunk Mode, and the paging system basically isn't outputting dial-tone -- when in Trunk Mode it just sits there waiting for some audio to come in the trunk port and then records & rebroadcasts that audio. My suspicion is that this lack of dial-tone is causing the SPA8800 to think the FXO line is dead. I've looked for a setting to tell the SPA8800 to ignore the lack of dial-tone and just try to automatically blast audio out the FXO port, but I cannot find it. Does that setting exist? Is there a SIP Header I can have Asterisk send to make the SPA8800 just send the call to the FXO port without a dial string and without waiting for dial tone?

Try 120 minute best quality.
Don't forget to compress the audio to AC3.
If that ends up too large, duplicate the preset you just used and dial down the bitrate and save it. Then apply the new version and try again.
Rinse and repeat as nec till it fits.
x

Similar Messages

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
<u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
<u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

How Do I Configure SSL for RAC Installation.

Experts,
Requesting your inputs on configuring SSL for my RAC environment.
- Oracle DB version is 11.2.0.2
- RAC is with two nodes.
- Two nodes are : rac1.oracle.com and rac2.oracle.com
- RAC setup has SCAN feature configured. SCAN FQDN : racscan.oracle.com
- All clients talk to RAC DB using SCAN feature as shown below.
client applications -> racscan.oracle.com ---> rac1.oracle.com
---> rac2.oracle.com
- tnsnames.ora file on both RAC instances has hostname as "racscan.oracle.com" instead of their individual phyiscal host names.
How do I configure SSL for RAC:
1. Do I need to generate certificate request for individual hostnames or only for SCAN hostname ?.
2. If I generate a certificate based on SCAN hostname, how does SSL work since SCAN hostname is not a phyiscal host name ?
3. What is recommended strategy for configuring SSL for RAC environment ?
Thanks

The documentation on the creation of Oracle Wallets is not specific to RAC, and the RAC SCAN instructions for TCPS are very vague on the specific requirements for the certificates required in the wallets for proper operation. I too am struggling to get it to work. Does anyone have a more technical guide to the specific configuration of the certificates needed and what specific configuration file changes need to be made?
Also, the self signed documentation is getting REALLY old. Oracle, please stop giving instructions that demonstrate irresponsibility and show the proper method of certificate requesting and importing to wallets.
Edited by: user11338513 on Mar 21, 2012 2:23 PM

How can I configure labview for communication with Modbus I/O?

i read a article about configureing Labview for communication with modbus I/O in NI developer zone, but it was written for Labview 6, how can I configure it with labview 7. it seems there are some difference. Thanks!

In both LabVIEW 6 and 7, you connect to modbus using Lookout Protocol Drivers (LPD) and then communicate to LPD using the tag engine of LabVIEW DSC or through DataSocket.

Added additional user. How do I configure password for this user?

Have two different accounts. Second accound added but don't understand how to cinfigure password for this account.

A bit confused by your query, so can you clarify a few points.
re: added additional user
You do not add additional users to Thunderbird, so I presume you mean you have tried to create another mail account for someone else in your own profile.
You do not configure passwords for other peoples email addresses as that would be a privacy issue and only they should do it.
Lets start at the begining.
If more than one person is using a computer, they should have their own User Account which they access via a password they choose. This gives them their own desktop view and access to programs installed on computer, such as Thunderbird.
Thunderbird will be available for them to use.
When you run it for the first time in their User Account, it will create a Profile in their User Account.
Thunderbird will also then ask you to create a mail account in that Profile.
The details you enter will ask for Name. email address and a password.
That password is the same password they use to access their email in their webmail account using a browser, so only they should know that password and they should not divulge it to anyone - however in some cases, eg: spouses, they may know each others password.
You can choose whether Thunderbird remembers the password or not before creating the account, but the password would still be required to configure the mail account.
This method means that no one can see that persons emails nor access their password details because they do not know the password to the computer User Account.
If you have only the one admin User Account which several people use, then anyone has access to anything on that computer. This may be fine if eg; spouses share the computer, but it is not a practise that should be used in any other environment.
If you have mail accounts created in the same Thunderbird profile, then all mail and passwords are freely available for anyone to see and this may not be desired.
Some people use only the one User Account, but they have their own Profile created in Thunderbird.
When Thunderbird was initially run, it created a defult Profile, but you can add additional Profiles using the Profile Manager.
The mail account is created in that Profile and then they can apply a Master Password in Thunderbird.
This means that anyone can still see anyone's emails as on startup as anyone can select any Profile.
But, the access to passwords is locked and removal of Master Password will remove all stored paswords to safe guard privacy.
Some info on Master Passwords:
* http://kb.mozillazine.org/Master_password
Some info on creating additional Profiles using Profile Manager:
* http://kb.mozillazine.org/Profile_Manager

How do i configure REGISTRY for enterprise services

Hi,
Please let me know how to Configure Registry for enterprise services in SAP Discover system V2.
Regards,
Naveen

I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

How long does "Configuring sync for MobileMe" take?

After getting used to my 3GS I took the next step to sync with my MacBkPro via MobileMe. I have gotten all the way through the process to "Find my iPhone" and the wheel is going around saying "Configuring sync for MobileMe" for about 20 minutes. How long should it take? Is it related to the number of Contacts I have in my iPhone which is also synced to my server at work and has 100's of contacts. How long should I wait and how do I abort?

Same sort of thing going on here.
What ended up happening?

How do i configure jenkin for uploading IPA in ITuneconnect

Hi All
I need your help
My jenkin build configure with testflight . Whenever we make a build, IPA get uploaded into Testflight.
How do i configure Jenkin so that whenever we build, that build get automatically uploaded in ITunes Connect?
Currently we manually uploaded that IPA using application loader.

The native Android Youtube player does a much better job of handing video playback than embeded flash in a browser.

How do i configure a FOR loop to have the behavior of the step Loop Type: Pass/Fail count?

Hello,
I'm using the Pass/Fail count set to one Pass to capture an event generated by my DUT. I originally used a numerical compare step with the Looping type of Pass/Fail count to accomplish this. Unfortunately the implementation changed and now I need to execute a few steps that can not be combined within one code module as before. Nor can these steps be put into a subroutine. One of the steps executes a .NET asembly and I haven't figured out how to pass the reference to the subroutine. When the subroutine is intered the reference is lost and the methode does not execute correctly.
I have an evaluation function the exits the loop when the expected conditions are met. Everything works except for the Overall Pass/Fail result of the For loop. If the loop exits due to the first numerical compare test passing, I want the loop overall execution to report as "Passed". If the loop reaches it's predetermined number of iterations, the overall result needs to report as "Failed". It would also be nice to have the radio button functionality of "Record Result of Each iteration". Some conditions require a wait over a minute for the event to occur and I don't want to generate needless data for the report.
Currently I get the pass/fail status for each For loop iteration, but only "Done" for each loop iteration. I don't want the initial few failures to cause the test to fail.
Does anyone know how to do this? Suggestions?
Thanks,

I have 2 steps in the loop that can not be combined into one step. This forces me to implement the behavior in some form of loop. A While Loop could be an option. I would need to pass the Step.Result.Status from the Multiple Numerical compaire step to the condition of the While Loop. I tried to use the Step.TS.ID without success. Some form of reference to the numerical compare step would be needed. I'm using a For Loop as I do want to limit the number of iterations of the loop. In the case where the loop iterations are reached, the event I am trying to detect did not occur at the correct time and a failure needs to be reported.
I came up with something based on my comments in the second post:
1) To start with I configured a Locals.ForLoop_5 variable. This is used to set the limit on the loop iterations and for comparison after the loop has finished executing. More on that later.
2) The first step inside the loop invokes a method within a .NET assembly that has been packed in a DLL This method gets the required data from the DUT and stores it to a text file.
3) The next step is the Multiple Numeric Limit step. This step invokes a VI that extracts the data from the text file. This step has been customized in several ways.
i) In Run Options, the Results Recording Option was disabled. This prevents recording of "Failed" while the loop executes when waiting for the event to happen.
ii) In Run Options, the Step Failure Causes Sequence Failure is unchecked. Same reasoning as i) These steps are not true failures.
iii) A Post Action is configured to go to the nexxt step after the For Loop End step On Condition True with the logic of Step.Result.Status == "Passed". This causes the loop to exit when the first "Passed" is encountered which corrolates with the event I'm trying to detect. On Conditon Fail remains set to default.
4) The step after the For Loop End is an expression step with everythin set to default except for the Status Expression logic set to: Locals.Loopindex < Locals.ForLoop_5 ? (Step.Result.Status = "Passed") : (Step.Result.Status = "Failed"). This step performs the overall Pass/Fail reporting for the For Loop. If the number of loop iterations is less than the maximum it could have only gotten there by the previous logic triggered by the numerical compare passing, therefore "Passed". If the loop index has reached the limit, then the event was not detected, therefore Failed.
I have tested this work around with success, it just a pain to now have to implement this on my 40 some odd For Loops.
If there is a better way, I'd still like to hear it.

How do I configure Compressor for a 122 min clip?

I'm trying to make a 122 min viewer DVD ...its not fancy .. no menus, no titles ... its first play. I've read the user manual trying to figure out how to configure Compressor but I can't make heads or tails of it -- calculating bit rates and all.
its a 22 GB file. I don't need high quality video output. I just need to get this whole clip on one DVD that will play in a consumer deck.
I used Compresssor 1.2 to create files for DVD Pro 3 ... using the "MPEG2 120 min Fast Encode" preset and got 5 GB.
is there a better preset? ... something else I need to do to the quicktime file to fit it on a 4.7 GB disk?
thanks for your help!
ana

Try 120 minute best quality.
Don't forget to compress the audio to AC3.
If that ends up too large, duplicate the preset you just used and dial down the bitrate and save it. Then apply the new version and try again.
Rinse and repeat as nec till it fits.
x

How do you configure SMTP for emailed alerts?

I'm using the current Mavericks Server. I would like to configure Alerts to email Alerts to me. My server is *not* an email server, so email alerts would have to go out through an external SMTP server. How do I specify the SMTP server that should be used for emailing alerts?

I think the only way to set it up via the GUI is to activate the mail server service and set it to send through the external SMTP server.

How to realize configuration-values for applications,updateable at runtime?

Hello community,
i'm developing at a pilot-system for a new application on NW 71.CE in pure Java-Environment. The target-Application conists of different modules. Mainly out of many single Web-Dynpro-Applications and many different Java-Beans for business-logic and process-integration to different systems (ERP, KM etc).
What i'm now looking for in my Pilot is how to achive global configuration-values, which can be accessed from all of my application-components (WD-Apps, Beans,...) and which are in some way updateable at runtime.
So simple property-files are not what i want.
Any ideas welcome
Matthias

Check your stack trace. I suspect it's getthing thrown from elsewhere.
Incidentally, I think your class to Class.forName("java.lang.Object") is overkill as you're not going to get that far if the Object class is not available!

Configure SPA8800 for inbound calls in switzerland

Good Evening,
i have a problem with this gateway, i'm able to make correctly outbound calls but if i receive an inbound call from the pstn line it doesn't answer.. I saw that the psnt status reamains on "idle".
I'm in Swizterland (Lugano). How can i manage that?
Regards

Wrong line setting may cause ring is not recognized. Unfortunatelly, I know no correct setting for your Telco operator. Wait for someone's reply here or ask your operator for PSTN line specification. Also, seller of SPA8800 should support you. The European Telecomunication Standard ETS 300 001, table 1.7.9 (and others) may help you as well.
Now something completelly different. Are you sure you have call routing set properly ? If incomming calls have nowhere to go, then it will not be answered. Turn on syslog, debug log and catch them. It may reveal you something helpfull.

How can I configure Mail for pop servers when it wants to make it an IMAP account?

When starting Mail for the first time, I enter my account credentials and Mail sets it up as an IMAP account. For the past several years, I've needed to configure the pop server settings for this account on different devices. The IMAP configuration Mail came up with won't work. How can

The way of setting up Mail for different account types is to:
Open Preferences
Click Accounts
Click +
Enter username and password, then hold down the option key when clicking Continue.

How do i configure outlook for use with icloud and my iphone?

I am at a loss at how to configure my outlook 2007 for the best synch and use with my icloud and or iphone. Any help out there?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

How do I configure SPA8800 for a Viking FBI-1A?

Similar Messages

Maybe you are looking for