How do i configure sprint for outgoing messages

I would like to use sprint for outgoing email messages. on my iPad how do i do that/

Hello and thank you for using the Palm Help Forums!
You may want to contact Sprint for further assistance with the Sprint Mobile email. However, I can assist you with the built in Email (Versamail) application.
Post relates to: Treo 800w (Sprint)

Similar Messages

How to set plain-text for outgoing messages?

I just upgraded from a Pre "minus" to a Pre 2 with WebOS 2.1 . I now have mail recipients complaining that my messages are in HTML. How to I revert to plain-text for sending messages?
Post relates to: Pre p100eww (Sprint)

Hi jason ,
For setting Heder text for your ALV table
ip_confing type ref to CL_SALV_WD_CONFIG_TABLE.
"set alv table header
ip_config->if_salv_wd_table_settings~r_header->set_text( 'Test ALV Header functionality' ).
first you have to hide the DDIC text and then try to set your own text .
"modify columns
LOOP AT lt_columns INTO ls_column.
    lr_column = ls_column-r_column.
    CASE ls_column-id.
      WHEN 'MANDT'.
        "hide this field
        lr_column->set_visible( cl_wd_abstr_table_column=>e_visible-none ).
       WHEN 'SEQNR'.
        "set header to different string
        lr_column->r_header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_none )." use this line to hide ddic text
        lr_column->r_header->set_text( 'Position' ).
    endcase.
endloop.
Regards
Chinnaiya P

How to make a DKIM signature for outgoing messages in Thunderbird (SMTP-server does not support DKIM)?

SMTP-server does not support DKIM signature.
How to make a DKIM signature for outgoing messages in the Thunderbird?

I'm not familiar with this particular use of the terminology.
Thunderbird has S/MIME support built in. You can add PGP support via the Enigmail add-on. Both offer the means to sign and encrypt messages.
I see add-ons to support the checking of DKIM-signed incoming messages, but haven't found any yet for signing.
Is it something that an email client is entitled to do? The Wikipædia entry says
<blockquote>Both modules, signing and verifying, are usually part of a mail transfer agent (MTA).</blockquote>
and that means a server, as opposed to a client (MUA).

How do I configure Sprint Mobile Email to show my name in the email return address?

I am using Sprint Mobile Email to check & send my Yahoo email on my Palm Centro. When I send emails it only shows my email address in the return address and not my name. I have my name set up in Yahoo but it doesn't get picked up when I send emails from my phone.
How do I configure Sprint Mobile Email to also show my name in the email return address? Everyone may not recognize my email address as being me.
Thank you
Post relates to: Centro (Sprint)

Hello and thank you for using the Palm Help Forums!
You may want to contact Sprint for further assistance with the Sprint Mobile email. However, I can assist you with the built in Email (Versamail) application.
Post relates to: Treo 800w (Sprint)

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
<u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
<u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

How Do I Configure SSL for RAC Installation.

Experts,
Requesting your inputs on configuring SSL for my RAC environment.
- Oracle DB version is 11.2.0.2
- RAC is with two nodes.
- Two nodes are : rac1.oracle.com and rac2.oracle.com
- RAC setup has SCAN feature configured. SCAN FQDN : racscan.oracle.com
- All clients talk to RAC DB using SCAN feature as shown below.
client applications -> racscan.oracle.com ---> rac1.oracle.com
---> rac2.oracle.com
- tnsnames.ora file on both RAC instances has hostname as "racscan.oracle.com" instead of their individual phyiscal host names.
How do I configure SSL for RAC:
1. Do I need to generate certificate request for individual hostnames or only for SCAN hostname ?.
2. If I generate a certificate based on SCAN hostname, how does SSL work since SCAN hostname is not a phyiscal host name ?
3. What is recommended strategy for configuring SSL for RAC environment ?
Thanks

The documentation on the creation of Oracle Wallets is not specific to RAC, and the RAC SCAN instructions for TCPS are very vague on the specific requirements for the certificates required in the wallets for proper operation. I too am struggling to get it to work. Does anyone have a more technical guide to the specific configuration of the certificates needed and what specific configuration file changes need to be made?
Also, the self signed documentation is getting REALLY old. Oracle, please stop giving instructions that demonstrate irresponsibility and show the proper method of certificate requesting and importing to wallets.
Edited by: user11338513 on Mar 21, 2012 2:23 PM

How to limit mail size of outgoing messages

I would like to limit the sizr out outgoing messages in SUN JES. Is there any attribute I can modify so that each user have same limit size other than change it individually for each user?

You can handle the limit of any mail at MTA-level with the blocklimit, noblocklimit, sourceblocklimit directives in the channel definitions (in imta.cnf)
Give a look at the MTA configuration details at
http://docs.sun.com/source/819-0106/mta_config.html
I think that you may want to try something like sourceblocklimit directive.
Marco

How to limit mail size of outgoing messages per domain/user

Hello,
i want to limit the size of a mail a user can send. For inbound mail there are attributes in the directory service: mailDomainMsgMaxBlocks and mailMsgMaxBlocks.
But these limitations only enforce the size of incoming mail.
I've read the messaging server admin guide but all i could find out is that i could limit the size of outgoing mail via a channel.
For me this solution ist not granular enough. I want to set the outgoing mail size limit per user. Furthermore i don't know the impact of configuring 200+ channels for enforcing individual outgoing mail size limits per hosted domain.
Does anybody know a solution for this problem? Maybe i've read over something. Or can anybody tell me the performance impact of 200+ channels at least?
Thank you very much,
af_inet
JES 2005Q1, Solaris10, V440

Hi jay_plesset,
thanks a lot for your clarifications.
Why would you need 200 channels? That sounds like a
very strange setup. Setting outbound max size per
user sounds like a very unusual demand, too.Let me explain: I got several departments who control their email settings in the messaging server via a webapp. So they can add, delete and modify users. They can manage mailing lists and so on. It's really a cool tool :-) I want this thing to be as granular as an own mailserver for the department would be. So it would be cool when the webapp writes an attribute like maxMsgBlocks in the DS and the thing is done.
I don't understand why you guys could do the stuff for inbound but not for outbound. Is there a technical reason or is it just because it seems strange? :-)
If you REALLY need something like that, 200 channels
would need a POOL of at least 200 jobs in order to
reliably run, and that's likely to need lots of
system memory.I think that's not the way i want to go.
Consider a custom channel, or something like that,
that does an LDAP lookup for setting message size on
sending. You'd need to enforce smtp authentication,
so you know who your messages are coming from, first,
and then you could proceed from there. This is not a
trivial setup.Sounds interesting. Any documentation hints for custom channels?
Thanks again for your reply,
af_inet

How to remove first line of outgoing messages: ?xml version="1.0"........

On outgoing messages, when I look in MONI, I see properly formatted XML message.
The first line of all my outgoing files has this line:
<?xml version="1.0" encoding="UTF-8" ?>
Is there a way to suppress this?
If so, is there a way to suppress for only certain partners within one interface?
Thanks,
Jeff

Hi Jeff,
As others pointed without this line the document will not be a valid document. Can you tell your complete requirment. One of these kind of requirement is discussed in this thread, you can see whether its the same in your case or not. If not then tell your complete req. so that somebody can help you out here.
Remove first line in the XML Document
Regards,
---Satish

SOAP handler for outgoing message

Hello,
I am implementing a order related webservice running under WebLogic 8.1. It sometime needs to send SOAP request to other external (outside my org) webservices. Is there a way to add a handler to intercept all outgoing SOAP message from my order webservice?
Thanks,
PC

> I also want to use a module for the message received from the adapter. Do I have to call the module after the
> sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
> entry?
yes.

Configuring sendmail for outgoing mail only.

I wonder how I can configure the sendmail.mc to only allow outgoing mail upon detecting an error from the system?
This is require as a sort of notification to the system administrator upon detecting of fault within the system via an e-mail.
Thanks

With the changes that have occurred within Sendmail itself it might be easier just to have all of the mail stay locally on the box and to disable the ability to receive e-mail from anywhere else.
see:
http://www.ilkda.com/sendmail/Single_Host.htm
towards the bottom of the page.
alan

The folder for Outgoing messages

Hello,
My internet connection is not stable and very often when sending a message I receive an alert that the SMTP server is unreachable or something like that. So to send a message I have to wait when the connection is restored. And it may take quite a long time just sitting in front of the computer.
Instead, as far as I remember in Outlook Express there was a folder where all outgoing messages were put after I press "Send" button and sent as soon as this was possible.
Why is there no such an "Outgoing" folder here in Thunderbird? I can't find an option weather to "Send messages immediately" or not.
Thanks for advice.

Messages that are being sent now or later pass through the aptly named Outbox. You can find the Outbox under Local Folders.
Normally when you lose your network connection the Send button changes to a Send Later button and the message will go to the Outbox and wait until the network returns and you place Thunderbird back in the Online mode.

How can I configure labview for communication with Modbus I/O?

i read a article about configureing Labview for communication with modbus I/O in NI developer zone, but it was written for Labview 6, how can I configure it with labview 7. it seems there are some difference. Thanks!

In both LabVIEW 6 and 7, you connect to modbus using Lookout Protocol Drivers (LPD) and then communicate to LPD using the tag engine of LabVIEW DSC or through DataSocket.

Messenger Express can not attach any file for outgoing messages.

An error "Maximum attachments reached" comes out when
I would attahch any file to outgoing message by Messenger Express, even if attachment limit set as 5MB through Netscape Console4.2.
Any other option to allow user to attach files ?
Regards,
Takuto

hi,
Are u using IMS 5.2 messenger express?
U may want to take a look at the attach_fs.html.
Its working for me.
cheerz,
marxz
Original Code
if ((window.opener.attachnum.length + activeattachments ) < main.cfg['mailClientAttachmentQuota'] || main.cfg['mailClientAttachmentQuota'] == -1)
{alert("Maximum Attachments Reached")return false;}
REVISED CODE:
if ((window.opener.attachnum.length + (activeattachments + 1)) < main.cfg['mailClientAttachmentQuota'])
{alert("Maximum Attachments Reached")return false;}

Added additional user. How do I configure password for this user?

Have two different accounts. Second accound added but don't understand how to cinfigure password for this account.

A bit confused by your query, so can you clarify a few points.
re: added additional user
You do not add additional users to Thunderbird, so I presume you mean you have tried to create another mail account for someone else in your own profile.
You do not configure passwords for other peoples email addresses as that would be a privacy issue and only they should do it.
Lets start at the begining.
If more than one person is using a computer, they should have their own User Account which they access via a password they choose. This gives them their own desktop view and access to programs installed on computer, such as Thunderbird.
Thunderbird will be available for them to use.
When you run it for the first time in their User Account, it will create a Profile in their User Account.
Thunderbird will also then ask you to create a mail account in that Profile.
The details you enter will ask for Name. email address and a password.
That password is the same password they use to access their email in their webmail account using a browser, so only they should know that password and they should not divulge it to anyone - however in some cases, eg: spouses, they may know each others password.
You can choose whether Thunderbird remembers the password or not before creating the account, but the password would still be required to configure the mail account.
This method means that no one can see that persons emails nor access their password details because they do not know the password to the computer User Account.
If you have only the one admin User Account which several people use, then anyone has access to anything on that computer. This may be fine if eg; spouses share the computer, but it is not a practise that should be used in any other environment.
If you have mail accounts created in the same Thunderbird profile, then all mail and passwords are freely available for anyone to see and this may not be desired.
Some people use only the one User Account, but they have their own Profile created in Thunderbird.
When Thunderbird was initially run, it created a defult Profile, but you can add additional Profiles using the Profile Manager.
The mail account is created in that Profile and then they can apply a Master Password in Thunderbird.
This means that anyone can still see anyone's emails as on startup as anyone can select any Profile.
But, the access to passwords is locked and removal of Master Password will remove all stored paswords to safe guard privacy.
Some info on Master Passwords:
* http://kb.mozillazine.org/Master_password
Some info on creating additional Profiles using Profile Manager:
* http://kb.mozillazine.org/Profile_Manager

How do i configure sprint for outgoing messages

Similar Messages

Maybe you are looking for