How do i configure Storage location

Hi
Can any body give me suggesition
i need to configure my org Structure like this
My office treating as plant. across india we are having around 50 sites are there. the site given by our client. where we are placing our assets.
My question is can i map these sites as my storage locations.from one site to another site material transfer is also happens.
can any body give suggesitions.
Regards
Sitaram

Hello
Yes.
You may treating office as plant and sites as storage locations.
But ask your question here:
SAP ERP - Logistics Materials Management (SAP MM)

Similar Messages

How to change the storage location in Lightroom 3.6.?

How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, Karin

Would you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload.

How can i add STORAGE LOCATION field which is not...............

hi,
sap gurus,
good morning to all,
how can i add STORAGE LOCATION field which is not in the standard tables namely
KOMP, KOMK, and KOMG.
how to include it in our FIELDS FROM FIELD CATALOGUE.
if we include this field is there any impact on the standard tables.
plz let me know this.
bcz
we are selling our products in two ways
(1). one is straight from factory ie direct sales from factory
if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
deliver him which ever is economical either rail or road.
before coming to second case of selling the goods
we will do STOCK TRANSPORT ORDER from plant to different storage locations.
if we did STO thru road we have to sell the goods thru road only.
if we did STO thru rail we have to sell the goods thru rail route only.
(2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
location which is not registered under excise.
if the goods came by road then it will be delivered by road only.
if the goods came by rail then it will be delivered by rail only.
my logic here is
basing on the
storage location, transportation types, and distance i want to create condition record
that captures exact frieght at the sales order level.
confirm whether i am right or wrong.
regards,
balaji.t
09990019711.

Hi,
It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
But if you have no choice expcept to change the standard tables to meet your requirement - then you need an access key to modify the object, which is available from the market place.
Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
REWARD POINTS IF HELPFUL
Regards
Sai

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

How to pre-configure wireless locations

Does anyone know how to pre-configure wireless locations that can them be pushed to several computers via ARD?
We are taking admin rights away from most users, which means they cannot create a wireless location. I need to find a way to have a file or files that are preconfigured with the locations we need (on lab and off site) so they can connect to our private wireless network on lab, and then just plain old dhcp off site. I've tried modifying the preferences.plist and networkinterfaces.plist, but it puts MY computer information throughout, and that is not acceptable.
I UNIX command or script would be better.
Any help is appreciated.
Thanks,
Lisa

Hi.
2 things -
1. use T3StartupDef interface for startup classes
(http://edocs.bea.com/wls/docs61/javadocs/weblogic/common/T3StartupDef.html).
2. check out the example code in
examples\i18n\logging\startup\UserSMessagesStartupImpl.java. This is a
startup class that uses T3StartupDef and binds to the JNDI tree.
Hope this helps,
Michael
GSL wrote:
Michael
1. But the question is integrating JNDI with some START UP mechanism
2. I also need a sample of a startup class/tutorial
Michael Young <[email protected]> wrote:
Hi.
Not sure - you might try posting this to the JNDI newsgroup -
weblogic.developer.interest.jndi.
Regards,
Michael
GSL wrote:
Hi
Suppose I need to lookup in message bean an admin email
in order not to hardcode it
say ctx.lookup("ADMIN_TO_NOTIFY");
so in JNDI it is bound to say [email protected]
Of course I want to configure it somehow so it is dynamic enough
in some config file
One way to do it is some tech support servlet that will rebind it
and init binding thru startup class reading it from customconfig.xml.
1. Is there a better way to do it???
config.xml it seems does not allow FULL access to JNDI tree and sois console
2. Is there a JNDI console for WL?
3. Is there an example of startup class?
Thanks--
Michael Young
Developer Relations Engineer
BEA Support
Michael Young
Developer Relations Engineer
BEA Support

How to exempt a storage location from MRP run

Hi all,
How do I exempt a storage location and all its materials from MRP run.
I am creating a new storage location and this should not be considered for MRP and no idoc should be generated if a purchase order or a delivery is created from this storage location( should we stop entering this storage location in BD64 filters or anything more to prevent triggering of the idoc).
Can somebody please through some light on these issues.
Kind Regards
Chakradhar
<REMOVED>

Hi
You need to set up master data for that material.In Mrp-4 View set storage location indicator as 1(one) .In this case your storage location stock will be exclude from MRP .
Hope this will help
Dilip

How to change the storage location using BAPI_OUTB_DELIVERY_CHANGE

Hi !
I want to do batch split in the delivery using BAPI_OUTB_DELIVERY_CHANGE.
Can anyone tell me how to pass/change the storage location of each batch item.
Is there any other BAPI that can do the batch split and populate the storage location also for the split batches?
Regards,
Firoz.

Hi all,
BAPI_OUTB_DELIVERY_CHANGE can be used to do batch split and updating storage loaction against each item of an outbond delivey.
I have done that in the folllowing way:
1 > Firstly i have updated the storage location for each delivery item using 'BAPI_OUTB_DELIVERY_CHANGE' passing some mininal parameters.
   Fetch the item details from LIPS table based on the outbound delivery and pass the corresponding fields to item_data, item_control and item_data_spl parameters and passed into intenal table li_lips.
Loop at li_lips inti lw_lips.
    lw_item_data-deliv_numb           = lw_lips-vbeln.
    lw_item_data-deliv_item             = lw_lips-posnr.
    lw_item_data-material                = lw_lips-matnr.
    lw_item_data-fact_unit_nom      = lw_lips-umvkz.
    lw_item_data-fact_unit_denom = lw_lips-umvkn.
    lw_item_data-base_uom            = lw_lips-meins.
    lw_item_data-sales_unit            = lw_lips-vrkme.
    lw_item_control-deliv_numb      = lw_lips-vbeln.
    lw_item_control-deliv_item        = lw_lips-posnr.
    lw_item_data_spl-deliv_numb   = lw_lips-vbeln.
    lw_item_data_spl-deliv_item     = lw_lips-posnr.
    lw_item_data_spl-pick_denial   = 'X'.
    lw_item_data_spl-stge_loc       = v_lgort.
"(This would be your Storage Location which you want to be updated)
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_lgort     TO li_item_data_lgort .
Appending work areas into internal table to pass as parameter
    APPEND lw_item_control_lgort TO li_item_control_lgort.
Appending work areas into internal table to pass as parameter
    APPEND lw_item_data_spl_lgort TO li_item_data_spl_lgort.
endloop.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Storage location
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data       = lw_header_data
      header_control   = lw_header_control
      delivery               = v_delivery_no
      techn_control     = lw_header_tech_control
    TABLES
      item_data           = li_item_data
      item_control       = li_item_control
      return                 = li_return_change
      item_data_spl    = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
2> Then i have used the same BAPI again 'BAPI_OUTB_DELIVERY_CHANGE' to do the batch split/update batch only(if required) and change the Actual Delivered Quantity.
Here you have to pass the same thing along with actual delivery qauntity and different batches to do batch split.
Here it is assumed that Batch numbers, actual delivered quantity are coming from an internal table i_lqua.
Looping through Internal table to get Bin details
LOOP AT i_lqua INTO w_lqua .
Clearing work area before use
    CLEAR : lw_item_data, lw_lips, lw_item_control, lw_item_data_spl.
Reading table comparing metrial number
    READ TABLE li_lips INTO lw_lips
    WITH KEY matnr = w_lqua-matnr BINARY SEARCH.
If read is successful, passing values from table
    IF sy-subrc EQ 0.
Passing the delivery details into Item level table
      lw_item_data-deliv_numb              = lw_lips-vbeln.
      lw_item_data-deliv_item                = lw_lips-posnr.
      lw_item_data-material                   = lw_lips-matnr.
      lw_item_data-batch                       = w_lqua-charg.
      lw_item_data-dlv_qty                    = w_lqua-verme.
      lw_item_data-dlv_qty_imunit         = w_lqua-verme.
      lw_item_data-base_uom               = w_lqua-meins.
      lw_item_data-hieraritem                = lw_lips-posnr.
      lw_item_data-usehieritm                = 1.
      lw_item_data-fact_unit_nom          = lw_lips-umvkz.
      lw_item_data-fact_unit_denom      = lw_lips-umvkn.
      lw_item_data-sales_unit                 = lw_lips-vrkme.
      lw_item_control-deliv_numb           = lw_lips-vbeln.
      lw_item_control-deliv_item             = lw_lips-posnr.
      lw_item_control-chg_delqty           = 'X'.
      lw_item_data_spl-deliv_numb        = lw_lips-vbeln.
      lw_item_data_spl-deliv_item          = lw_lips-posnr.
      lw_item_data_spl-stge_loc            = w_lqua-lgort.
      lw_item_data_spl-pick_denial        = 'X'
Appending work area into internal table to pass as parameter
      APPEND lw_item_data TO li_item_data.
Appending work area into internal table to pass as parameter
      APPEND lw_item_control TO li_item_control.
Appending work area into internal table to pass as parameter
      APPEND lw_item_data_spl TO li_item_data_spl.
Clearing work areas after use
      CLEAR : lw_item_data, w_lqua,lw_item_data_spl,lw_item_control,
                    lw_vbpok, lw_lips.
    ENDIF.
ENDLOOP.
Passing the delivery no in the work area of header data
lw_header_data-deliv_numb           = v_delivery_no.
lw_header_control-deliv_numb       = v_delivery_no.
lw_header_tech_control-upd_ind   = 'U'.
Calling BAPI to change the Batch/Batch-Split/Delivery Quantity
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
    EXPORTING
      header_data           = lw_header_data
      header_control       = lw_header_control
      delivery                   = v_delivery_no
      techn_control         = lw_header_tech_control
    TABLES
      item_data                = li_item_data
      item_control            = li_item_control
      return                     = li_return_change
      item_data_spl         = li_item_data_spl.
Calling BAPI to committ the task
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
This is the only way which i found as better way to do the Batch split and updating storage location togetherly.
I hope this code will help you.

How to change the storage location while create delivery?

Hi all:
I have to question to trouble you,when I create a delivery with reference to a sales order,however every time it set storage location 'FG10' to the delivery automatically.I can modify it, but how to modify this default value?the sales order haven't information about storage location.
thanks.
Best regards
lance

Hi Lance
Please try this:
In SPRO, go to Logistics Execution - Shipping - Picking- Determine Picking location - assign picking locations
here, for the reqmt plant and shipping point and storage conditions, define the applicable storage location. If you are not assigning any storage conditions in you material master, you may leave it blank. Storage conditions can be defined in the Material master in General Plant Data / Storage view.
After maintaining this, try creating a delivery and see if the delivery gets created in the required storage location.
Please reward points if this helps you
Rgds
Nageshwar

How do I maintain storage location for Planned Orders in APO

Dear all,
Can you help us in maintaining storage location for planned orders in APO. The storage location from material master need to be updated in product master of APO and the same shall be automatically picked from product master during Supply Network Planning run.
Material master CIF is live.
We have got the following content error in CIF consistency check. How ever this is nt goging to harm any thing, but we would like to maintain in both R/3 and APO.
Error:
Plant and storage location in SAP APO: 2004
Plant and storage location in SAP R/3: 2004 FGPA
Thanks in advance
Ram Mohan Rao Kolanupaka

Instead of maintaining additional master data, i would rather use CCR user exits to switch off comparison of planned order at storage location level if the APO storage location is blank. This way you would not have to make changes to PPMs everytime a new scale out of the solution happens.
In SE18 check the user exit /SAPAPO/CIF_DELTA3 (interface RELEVANT_FOR_COMPARE_ORDHEAD)
If it is not possible to switch off this comparison then I guess changing master data is the next step. Do explore with a developer though about the first option.

SHPCON - How to update LGORT (Storage Location)

Hi experts.
I'm using an INBOUND idoc with message SHPCON to create batch split for delivery items.
When trying to update Storage Location, the field is not updated, but all the other fields are correctly populated.
Does anybody know how I can have this field updated?
Any user-exit I can use?
Following the data I am using:
Message Type : SHPCON
Process Code : DELV
Function name : IDOC_INPUT_DELVRY
Segment E1EDL18: PIC
Segment E1EDL19: BAS
Thank you for you attention!
Edited by: Rodolfo Oliveira on Mar 6, 2012 10:24 AM

You're a bit confused. You can not buy more storage for your iPad. It is what you bought the day you bought it. So, a 16GB or a 32GB or a 64GB iPad can not be increased. What you bought was more Cloud storage. Apple gave you 5GB of cloud storage for free. Once you've used that, you need to buy more. Don't confuse that with adding storage to your actual iPad. Two completely different things.

How can we enter storage location in the Thirdparty order processing?

Hi Friends,,
Created one sales order with third party item.PR is generated automatically and wrt PR,PO is generated.I need to post first these stocks in my plant then my copany wil send to customer from my storage location.The material is not directly delivering to customer from vendor.Where can i do settings for this.
Thanks in advance...KB

I think your (original) question was why you cannot receive the third-party item into your SLoc and that question has been answered.
Your second question is a new one. The solution for your scenario might be individual purchase order scenario: you receive SO > SO automatically creates PurReq > you convert it into PO > GR with ref. to PO > you can ship out the goods to your customer.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5601d4545a11d1a7020000e829fd11/frameset.htm
Regards,
Csaba
Edited by: Csaba Szommer on Jun 15, 2009 10:25 PM

REM Prod Version: How to hide/disable Storage Location fields

Hi,
We are using REM.
For Issue storage locations, we are maitaining str location in BOM/MRP2 View.
For Receving Str locatiom, we are maitaining str location in MRP2 View.
Similarly, for REM assemblies, system provides str locations fields in Production Version.
Requst to guide on following points:
1. What is the application and priority of Strorage locations in Prod Version (PV)?
2. Can the Str locations in PV be hidden/disabled?
Regards
Nitin

Hi NITIN,
For receiving storage location of finished goods in REM system gives priority for selecting stor loc as below.
Production version (Rec.stor.loc) -> MRP view (prod stoarge loc)
For issue storage location of components in REM system gives priority for selecting stor loc as below.
BOM (issue storage loc) --> MRP view (prod stoarge loc) -->Production version (Rec.stor.loc)
why do u want disable the storage loc at production version.
please close reward and close or else come back for more doubt

How to validate the storage location in me21n?

Hi,
I am having the requirement to validate the storage location in me21n transaction
whether the entered material is belongs to that storage location or not.
is there any exit to this requirement?
Helpful information is rewarded.
Regards,
Riaz.

Hello Riaz,
The BADI ME_PROCESS_PO_CUST would be very useful here. If you want to trigger your validation message after user entered the data then use method PROCESS_ITEM.
I hope this helps.
Best regards,

How do I control storage location for iPhoto, iDVD and iMovie

My primary drive is getting full and I note that my User file has all of the iPhoto images, iDVD projects and iMovie projects. I want to take these collections off the main drive and place them on one of my external hard drives to open up space on my primary drive (the one with the Applications, etc.) How do I control where my images and movies are filed when I use the above applications? I do not recall designating any save function to this folder or drive. How can I save these files in a location on my external drives in tthe future? If I move these images and movies from my User file, will that cause a problem for iPhoto or iMovie or iDVD in finding the files in the future as I use these applications?

Hi
They are using three different concepts - VERY UNLIKE APPLE to do like this !
• iPhoto saves in a iPhoto library and there can be more than one - using the alt-key during up-start let's You to select which one You want to use and on Main Hard Disk at Root level in Photo folder.
• iDVD - Save an iDVD Project file (sort of folder) where You want to find it.
• iMovie - saves Event's and Project's in iMovie Event's resp Project's folders AND ONE MUST NOT alter or move anything in them or location of them - Moving Event's and Project's MUST BE DONE inside the iMovie Application !
So while one can move iMovie Event's and Project's to another Mac - the needed Photos (and audio from iTunes) will be missing and very hard to get iMovie on second Mac to find and recognice.
Yours (also confused - and moving step by step into the OLD FinalCut realm - Where everything makes SENSE !)
Bengt W

How to document for storage location summary

Dear All,
I am using this how to document and applying it to my scenario. Has anybody implemented this how to document?
My question was supposed I have some additional key figures in the report, say apart from ValStockValue and Total Stock, I have stock in QA, stock blocked, value of stock in QA, value of stock blocked.
What changes do I make changes to the source code of the FM module mentioned in the How to document..
Any inputs please!

Matt,
Check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc
Regards,
Masood Imrani S

How do i configure Storage location

Similar Messages

Maybe you are looking for