How do I configure the network in arch linux in virtuabox 3.0? I have

I think ifconfig says I have an ip address, but for some reason, pacman -Sy keeps failing to resolve the address. All I have installed now is the base system; I haven't been able to install any graphical environment yet because I can't download anything from the repository. Any help here? I really need this working!

I had this problem also. A quick fix is to go to network settings under the arch virtual machine entry, and select bridged adapter instead of NAT. That should fix everything up
Last edited by tomd123 (2009-07-15 16:12:15)

Similar Messages

  • Trying to use HPLJ 1102w as a wired network printer. How do you configure the network settings?

    I have an HPLJ 1102W and I want to use it as a wired printer on my LAN. The trouble is, the easy setup utility is geared toward wireless networking and the ethernet interface will not get a DHCP address from the LAN. In order to get an IP address, I have to go through the wireless networking configuration settings. Can anyone point me in the right direction on how to use this printer as a wired network printer?
    thanks,

    Hi,
    The HP LaserJet P1102w provide USB or wireless network interface only.
    the product do not include any ethernet card, as you may also find by its spesification System Requirements below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01999607&tmp_task=prodinfoCategory&cc=us&dlc=en...
    Connectivity: Hi-Speed 2.0 USB port / Wireless 802.11 B/G (P1102w only)
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I am unable to use my own network with my iphone for wi-fi.The message says "unable to join the network (my network). How do I configure the info in the phone to allow me access?

    How do I configure the setting in my iphone to allow me use of my own network?

    Thanks for the responses, they have been very illuminating!
    This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
    I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
    I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile.

  • How  to configure the network on Sun Solaris 8

    The Sun workstation is a license server, and Window NT workstation need to access the license file that located in the sun workstation.
    Now the Window NT workstation cannot connect with the sun solaris, and I guess that I need to configure the network on Sun Solaris 8.
    Could you please tell me how to do that step by step?
    If there is the system tool like the window system to configure the network easily and quickly.
    I appreciate it.
    Mark

    If your sun system is working then probably it has network configured already .You can check it by the following command on the sun.
    ifconfig -a
    Generally applications asks where license server is located and you need to give the ip-address or host name only . Application docs will give more detail about it.
    You can get ip-address from ifconfig comand above.
    Hemant Sharma
    http://www.adminschoice.com

  • I bought an iphone 5s free, I try to configure the network lte ANTEL Uruguay and will not let me. How I can do? thanks

    I bought an iphone 5s free, I try to configure the network lte ANTEL Uruguay and will not let me.
    How I can do?
    thanks

    What happens when you insert the SIM card?  Where did you buy this iPhone 5S?  Are you sure it is not already locked to a carrier?
    According to Apple, ANTEL is not a supported carrier in Uruguay - http://support.apple.com/kb/HT1937

  • How do you configure the a network for Airport Express from a PC computer

    A friend let me borrow her Airport Express so I could have wireless, but I can't figure out how to set up the network from my PC computer. She just gave me the device without any accompanying instructions or software.  The intructions online only explain how to setup the network using an Apple product.  How can it be done from a PC?

    Use the same instructions and the Windows version of AirPort Utility:
    AirPort Utility 5.5.3 for Windows

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • How i can configure the time of response between two APs if one of they "fail" for the reconnection for customers?

    Hi
    I whis to know how i can configure the WLC (2500) for reduce the time of responce between Two Lightweight APs (1040 and 1602) if one of they are disconnected for any reason (energy, malfunction, etc.) for the reconnection of the clients.
    I realized the next test: I have 2 APs connected, connect my laptop to the AP 1602 and start to making a TFTP transfer between my laptop and a server, then disconnect the AP 1602 and showing the laptop, the laptop makes the change to AP 1040, but the connection to the service, the TFTP transfer is cut because it takes about 30 seconds to resume the connection with the network
    How i can reduce this time, because my clients want their connection is not lost when passing a situation similar, i look in the pages of cisco but did not find any information pudisese help me, any help is welcome.
    thank you very much in advance
    Jonathan

    Not much you can do as its up to the client card to know it has no network connectivity and then to try to associate and obtain a DHCP address again. This is client dependent.
    Sent from Cisco Technical Support iPhone App

  • Fedora 13: After upgrading from FF3.6 to FF6.0.2 I no longer have a Java plugin. How do I configure the Java Plugin for FF 6 ? There is no Java Plugin at the site

    I am Fedora 13x64 bit. I just installed FF v6.0.2 from the FF download site. I backed up the existing FF 3.6 as firefox_old
    I need to have a Java plugin to access company site, how do I configure the Java Plugin ?
    At the Plugin area in FF6 there is no Java Plugin available, even after a search.
    I have Java 1.6.0 installed in the OS at:
    /usr/lib/jvm/java-1.6.0/jre/lib/amd64/libnpjp2.so
    I googled how to configure Java Plugin for FF 6 for Fedora 13 and the trick was to create a soft link from /home/<userID>/.mozilla/plugins to the above libnpjp2.so

    AVtech wrote:
    . . . If a person can't get an answer here I don't know where else to turn since Sun certainly wouldn't offer tech support for a free product . . .These forums are user forums, and only occasionally visited by Sun employees. Sun does provide Java technical support options, although (of course) at a charge.
    See:
    http://developers.sun.com/services/
    . . . I guess we'll just use JRE 5 until it's unsupported, whenever that will be. I'm still waiting for an answer on that question, too. See:
    http://java.sun.com/products/archive/eol.policy.html
    http://www.sun.com/service/eosl/
    This document (part IV and Appendix) has some debugging and troubleshooting information that may allow someone involved in the problem to resolve the cause:
    See:
    http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/contents.htm
    Any steps that you can take to isolate the problem to specific Java versions, browsers, applets, web sites, operating systems (and versions), etc, would enhance the possibility of getting help.
    You can try the applets at this Sun location and see if any of them are "slow".
    See:
    http://java.sun.com/javase/6/docs/technotes/samples/demos.html

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

    How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

    Welcome to the Apple Community.
    Settings > General > Network > WiFi and select your network.

  • I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    See if the iPad will accept the password after you restart it. It's worth a try.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You could also try a reset as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How do you configure the server in this situation?????????????

    Hi,
    We have Oracle 10.2 and Windows 2003.
    We have Oracle on Cluster (with Windows software).
    When the System are without cluster all it’s OK!!!!!!
    We have 2 Resources Cluster Group: Oracle and Applications.
    We have Oracle in Oracle cluster group.
    We have “W” Drive and a ftp program in Application cluster group.
    We have C drive in both nodes. We have installed Oracle in both nodes but we have “W” drive only associate to the Active Node because is a Cluster resource (Application cluster group).
    All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
    We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
    We think to put UNC pathes instead of “W” but it’s not possible (Metalink: Note:290703.1)
    How do you configure the server in this situation?????????????
    Thanks!

    We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
    If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
    Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

  • An unexpected error occurred while configuring the Network Bridge

    Windows XP Pro SP2, a new TP61 6460 6WG, all Win updates, all Lenovo updates.
    Everything works fine except... when I'm trying to create a network bridge I always get the following: An unexpected error occurred while configuring the Network Bridge.
    This is not the situation described in Microsoft's Knowledge Base KB309640 (http://support.microsoft.com/kb/309640/en-us). I have no ICS, no ICF.
    Any ideas?

    I had the same problem and was really frustrated. I was about to pull my hairs out but then i was finally able to solve it. The solution is deleting some files of WMI repository. The complete details can be found on my blog http://cheatppc.blogspot.com/2008/07/unexpected-error-has-occured-while.html
    Hope this solves the problem.

  • How can i get the network my iphone4 is locked to?

    how can i find the network my phone 4s is locked to..?

    Surely you must know who your carrier is?  Who bills you?

Maybe you are looking for

  • 10.1.3 af:selectInputDate crashes Safari 2.0.3

    When the user selects either a date value OR clicks "cancel" from the af:selectInputDate pop-up window, the Safari browser crashes. Running version 10.4.3 of OS X. The widget in the pop-up is rendered correctly, and the user is able to page through v

  • Use of security in web service

    Hi, I have tried to use security from the example jaas-sample of jwsdp 1.5 . I just want to secure my web service with a username/password. When I called my service from the client...I see the xml flow : <?xml version="1.0" encoding="UTF-8"?> <env:En

  • Creative cloud License problem / Camera raw problem / Linked ?

    I have bought a CC 1 year licence. Quite every time I start Photoshop CS 6 it says that the CC trial period has expired (I installed CS6 premium from trial a few days before CC was activated) It ask to connect oline to activate -  then it activate pr

  • Immortal Memory vs PermGen

    I know that with Java SE there are 3 memory areas (young, old gen and perm gen). Perm Gen being where the metadata of classes lives. With RealTime do these objects get stored in the Immortal Memory area? As far as i can tell, based off information pr

  • More All - where's the rest?

    When I'm reading a long e-mail, why does clicking on "More all" only sometimes work to download the rest of the message, and at other times, just blink at me and do nothing, even though I'm connected to the network?