How do I configure Tomcat 4.0 to work with IIS 5.0?

I want to deploy a jsp application in the "C:\Inetpub\wwwroot\jspapp\" folder and access that application from other machine on the net using the following URL: "www.mydomain.com/jspapp/default.jsp" instead of using "localhost:8080/default.jsp".
Thanks for any help.

This is known as "virtual host". You map IP:Port to Name.
On Windows, this is only possible with NT Server
(no virtual Hosts / only one Host on NT Workstation).
Hope this helps.

Similar Messages

  • How can you configure a WD external to work with Time Machine??

    I have an 1TB external WD MyBook drive that is connected to my network through my Linksys wireless router and am trying to figure out how to format the drive to use with Time Machine.
    I currently use the drive to store files from both my PC and my MacBook but can't seem to select the drive to use with Time Machine. I figured that I could just format the drive through the Disk Utility program, but the drive doesn't show up in Disk Utility. This may be because it is a drive connected through my router and not directly to my MacBook?!
    Here are a few questions...
    Any ideas on how to format the drive so it will work with Time Machine?
    Once formatted to use with TM, can I still use the drive to store other files from both my Mac and PC? or do I need to partition for this??
    Is it possible to set up an automatic backup schedule that will happen via my home wireless connection?
    Thanks in advance,
    Todd.

    You cannot use the drive with TM as you have it set up. TM will not work with a networked drive except a Time Capsule or a USB drive connected to an Airport Extreme Base Station (current version.)
    If you wish to use this drive for TM backups it must be connected directly to the computer. Other computers on the network can access the drive for TM backups if you turn on file sharing for the drive (select drive, press COMMAND-I, check the box labeled "Shared Folder," click on the Enable button.) The shared drive will have to be mounted on the other computers in order for them to use it as a TM backup drive.

  • How do I configure my new SSD to work with my iMac?

    I just installed a new 4TB Seagate SSD in my 24" iMac (early 2009).  When I turn on my computer, it starts up with an image of a folder and a question mark in the middle of the folder.  How do I configure my new SSD without my original utility disks (they're currently in another state . . . in the middle of moving)?  I have a drive adapter and have connected my old hard drive which allows me to run the computer, but I was unable to transfer everything from old to new using Disk Utility.  Thank you so much for any help you can offer.

    OK, it's not an SSD, it's an SSHD (love a set of initials) specifically it is a standard 4TB rotating drive with 8GB of SSD memory attached. Treat it just like any other drive because that is how it appears.
    "After doing some reading on the internet last night, it seemed like most people said what you're saying that the disks was the preferred method.  My concern is that I won't have my disks for another few weeks.  Do most people prefer not to clone in order to shed some of the unwanted programs and "stuff"?"
    If you want an entirely fresh installation then cloning is not the way to go, otherwise it's the best choice. If you don't have the disks it is the only way to go (with Snow Leopard anyway)
    You could boot from the old drive and use it to install Mavericks on the new one if you wish.

  • How do I configure a basic LDAP to work with OPS Center?

    I have Solaris 11 and have configured it a few ways with LDAP. The last setup I used Directory server with a proxy then added LDAP configs. I am having problem getting the clients working correctly but first I need to know if I can just configure LDAP without DSEE and allow OPS Center to control the users?
    Chapter 9 of the Oracle Solaris Administration guide says DSEE is recommended but not required and points you to chapter 14. But I have been unable to figure out how to create the DN and Bind PW prior to configuring LDAP with IDSCONFIG. The OPS Center server is already in play so if configured correctly I should be able to talk to the LDAP server.
    Does anyone know what set I am missing or whether it can be done without DSEE?

    After contacting Oracle I was informed that there Documentation is misleading and that DSEE is required.
    From Oracle
    "The statement "However, while using the Oracle Directory Server Enterprise Edition is recommended, it is not required", does not mean you can configure the Solaris native ldap client without a Directory Server. What the statement means is the Solaris native ldap client is not required to use the Oracle Directory Server, it is recommended, but the Solaris native ldap client can be setup to work with third party Directory Servers. The term "not required" is a reference to the use of the Oracle Directory Server vs a third party Directory Server."
    The documentation does not state that Directory Server of any kind is required.

  • How to get Camera RAW / Photoshop CS5 to work with Canon 100D?

    How to get Camera RAW / Photoshop CS5 to work with Canon 100D? I don't want to by this product again and again...

    In what way is ACR not working in Bridge?  Is there no right-click Open in Camera Raw available from Bridge, or there is, but the ACR version is less than ACR 6.7.1 or what exactly is the issue? 
    Also, if you open Photoshop and do Help / About Plug-ins / Camera Raw, is ACR missing from the list, or if not, what version does it say is installed?
    You might also want to describe what methods you have tried to correct the issue, since saying you've tried what you've seen posted and they didn't work, isn't really much to go on.

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

    I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

    Take a look at HeadRoom (headphone.com). It's a fabulous resource for all types of headphones, with great guides and useful reviews.
    http://www.headphone.com/

  • How can use my Wireless Location Appliance to work with RF ID's?

    How can use my Wireless Location Appliance to work with RF ID's for Asset Tagging.
    It seems Smartcard used for ID cards have a small RF ID, can I use this for Asset Tagging?
    Thanks in Advance

    There are two kinds of RFID tags: Active tags, which have a battery or other internal power source, and passive tags, which have no power source and work by reflecting the energy from an RFID scanner (basically). At the energy levels and distances used for WiFi location detection, passive tags will not return a detectable signal.
    Take a look at http://www.aeroscout.com/ for more info on WiFi RFID tagging.

  • How well does the wireless "Wild Charge" pad work with the iPhone?

    how well does the wireless "Wild Charge" pad work with the iPhone?

    I have tried similar things, and no, it has not become corrupted. So it should be fine

  • How to i get an itrack solo to work with pro audio x?

    how to i get an itrack solo to work with pro audio x?

    Long shot perhaps, but...
    how about...
    following  instructions in  manuals?
    http://help.apple.com/logicpro/mac/10/#lgcpebe92ce0

  • How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

    How do I get my mms text to work with net10? Cellular data network is not visible on my iPhone 4.

    After hours restoring phone and resetting all my accounts and settings the Bluetooth is back on. Not sure how long this will last. In regards to AirPlay taking over, I had to drive far enough from our wifi signal to allow the Bluetooth to take back the audio. Its working for now.

  • How do I get my Jawbone Era to work with my Ipad 2

    How do I get my Jawbone Era to work with my Ipad 2?  The Ipad shows the Jawbone as synced, however, when I play a video it does not play through the Jawbone, only the Ipad speaker.

    You need to pair the iPad with the bluetooth keyboard. I don't understand how you could have used it even once without doing this process (unless whoever sold the iPad and keyboard to you did this for you?) but perhaps it has somehow become unpaired. There should be instructions with the bluetooth keyboard on how to pair it with an iOS device like your iPad, but the general process is pretty straightforward as described here:
    iOS: Third-party Bluetooth accessories
    If you can't find the pairing instructions/user guide that came with the keyboard then look on the manufacturer's website, they'll almost certainly have downloadable User Guides containing the info on pairing.

  • How do i get my ipad 2 to work with another micro sim

    how do i get my ipad 2 to work with another micro sim

    Follow the instructions here >  iOS: Syncing with iTunes

  • How can iWeb hit counter be made to work with non-Apple server?

    How can IWeb hit counter be made to work with non-Apple server?

    This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
    OT

  • How can I remove  pages 5.0 to work with Pages 09 again?

    How can I remove  pages 5.0 to work with Pages 09 again?

    Welcome to Apple Support Communities
    When you upgraded to Pages 5.0, the Mac App Store kept Pages '09 in case you want to use it again.
    To access to Pages '09, open a Finder window, choose Applications in the sidebar and open the old Pages version. To access to it quickly, you can drag the icon to the Dock.
    I do not recommend you to remove Pages 5.0 or the Mac App Store will be always asking you to upgrade Pages. Also, Apple will add more features to Pages 5.0 in the future. See > http://support.apple.com/kb/HT6049?viewlocale=en_US&locale=en_US

Maybe you are looking for