How do I configure where my drafts in mail are saved?

We use google app and IMAP for email.  google recomends setting your mail client to save drafts in the IMAP draft folder not the defauld folder.  How do I configure this?

Check that you configured the SMTP server for each address correctly, it should match the user ID and password of the Imap server in use, and it should be marked as the server to use for the account.

Similar Messages

  • How to find out where R/3 report data are stored

    Hy,
    I am new in BW.
    I have SAP R/3 report, I need to transfer that report data (all table data) to BW.
    Could You explain me step by step how i can do it?
    How to find out where data are stored?
    Thank you very much!
    Regards,
    Arunas

    Hi Arunas,
    This topic has been discusssed here earlier. Check these links:
    BW solution for ABAP Reports
    BW reports
    Bye
    Dinesh

  • How can I configure where load.mlet file is written at wls startup?

    How does WLS 7.0/sp4 know where to write the load.mlet file that is generated upon startup? My server will not start if WLS attempts to write this file to a location where my userid has no permissions. I need to specify another location.

    wayne,
    I believe wls tries to write load.mlet under the domain directory and
    deletes it after it is done using the file. Unfortunately there is no
    way to tell wls to write it to another location. You could ask BEA for
    this enhancement ([email protected]).
    -satya
    wayne powell wrote:
    How does WLS 7.0/sp4 know where to write the load.mlet file that is generated upon startup? My server will not start if WLS attempts to write this file to a location where my userid has no permissions. I need to specify another location.

  • How do I configure Google Apps aliases in Mail client?

    Hi
    I´m using Google Apps for business and have 5 companies with about 15 different email adresses. 1 email adress is the primary and the others are aliases.
    I want to use Apples Mail client and I´m trying to configure the different accounts.
    Primary:
    Name: Company
    Mail: [email protected]
    Alias1:
    Name: Company1
    Mail: [email protected]
    Alias2:
    Name: Company2
    Mail: [email protected]
    ...and so on
    I have created several outgoing servers that I use from the primary account.
    When I recive an email to Alias 1 and send a replay it says that it comes from the Primary (Comapny). If I recive an email to Alias1 (Company1) I want to replay with that Name (Company1) and with a specific signature that are linked to that company.
    I´m not sure that I have explained it correctly but is there anyone out there with a similar problem and a solution to it?
    THANKS
    Regards
    Fabian Zetterberg

    Check that you configured the SMTP server for each address correctly, it should match the user ID and password of the Imap server in use, and it should be marked as the server to use for the account.

  • How do I configure Entourage to be default mail program?

    After problems with the Mac Mail program, I have switched everything over to Entourage. I can't, however, figure out how to make it my default mail program. I'd like Entourage to open when I try and send an email from an internet site, but can't figure out how to switch from Mail opening to Entourage.
    I have set it as the default mail program in iPhoto already.
    Any advice is greatly appreciated.
    Thanks!

    Hello, 
    Open Mail. Then Mail menu > Preferences... > General tab > "Default email reader:"
    mrtotes

  • How do I configure FireFox to send e-mail (with Live Mail)?

    I try to send a link through e-mail. I only manage to get Firefox to open Live mail, no e-mail message opened, no link added.
    This used to work under XP, now I use Windows7 Professional with the latest Firefox version

    Can you check whether your Norton browser add-ons are enabled on the Add-ons page? Either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions.
    The disabled extensions cluster toward the bottom on a gray background. If they are down there, try to enable them.
    If they won't enable, try using Norton LiveUpdate a few times to make sure you have the latest versions. You probably need to close Firefox and start it up again after the LiveUpdate in order for Firefox to detect the new files.
    Any luck?

  • How do I configure my iphone so my mail works?

    My hotmail account via my iphone worked well for many months but stopped working well today. We went to an AT@T store and the representative seemed to fix the mail system but when we came home here, it wouldn't work. It wouldn't send or receive messages.
    What settings on a router are necessary for the iphone to work with hotmail?
    I did add a portforward setting to my firewall so another program would work. That is fine. My desk top computer and my wireless laptop all work fine but now the iphone wont send or receive mail. All other internet related functions seem to work fine e.g. I can get onto Facebook.
    What do I do to resolve this problem?

    It does so by default... what's the issue?

  • Finding where my iweb site files are saved

    I need help. My original hd crashed so I have a new one to run my computer. I dragged and dropped all my apps to the new hd as told by a I.T. friend and now I am supposed to format the old hd to use a storage space. Will my website files be gone. Are they actually saved online. Where would I located the actual page files so I can copy them over or did they when I dragged the files over. I have a feeling I am going to have to reinstall all my ilife 06' software but I don't want to start from scratch for my website. I also had to archive and install the new hd because my old one eventually did something to where I couldn't even start from the new one.

    As Roddy was trying to tell you, if you found the "domain" file and it's the right one (double click on it and it will start iweb) you can move it to the same folder on the new drive.
    Actually you can store it wherever you want. Iweb will look at the last file loaded.
    Hopefully what you found is the right file.
    If it is BACK IT UP!!
    good luck

  • How do I edit long (3hrs.) podcast that are saved in mp4 format?

    I have several 3 hour podcasts in mp4 format. I'd like to edit the length and save portions of the podcasts as mp3 files. I tried burning the mp4 file to an audio CD, but due to it's length (3 hrs.), it will not fit on a blank CD-R. I downloaded Audacity. Can this do the trick? Any suggestions? Thanks!

    kidimi
    Glad that you finally sorted out what you were doing and discovered DV AVI.
    In your particular situation Prism would serve your purposes of generating the DV AVI 4:3 since your footage is 640 x 480. However, for others with different footage, the free Prism shortcoming is that it cannot offer DV AVI widescreen 16:9; whereas MPEG Streamclip can do the job for 16:9 as well as 4:3.
    QuickTime Alternative 1.8.1 that does come with the MPEG Streamclip's required MPEG2 Playback Component (free) also meets the Premiere Elements requirement for QuickTime installed on computer with Premiere Elements to work. This works in spite of the fact that QuickTime Alternative 1.8.1 is not the latest version of the regular QuickTIme.
    In post 2 of the following older thread, I detail the use of Prism (for 4:3) and MPEG Streamclip (for 4:3 and 16:9) to produce the DV AVI file.
    Finished video of project looks "weird" / slightly choppy? - Elements Village
    Any questions or need clarification, please do not hesitate to ask.
    Moving forward, do not use AVCHD (MPEG4 AVC/H.264) or H.264.avi in Premiere Elements. It is not supported.
    ATR

  • Where Awesome screen shot files are saved

    I want to know where to find my screen shot file?

    Nalin probably means the Safari extension Awesome Screenshot.
    When you make a screenshot from a webpage, a page should appear with a message like this:
    Congrats! Here is your screenshot.
    But perhaps the extension isn't working well anymore.

  • Where's my outgoing mails are?

    Since updated to 10.9.2 outgoing mail in imap account are just some, 26 in my case, where there are the other emails? Anyone have this problem?
    Thanks in advance, Andrea

    Hello Cybermaster
    Have you tried rebuilding the outgoing mailbox within mail by going to the drop down Mailbox > Rebuild? It is helpful to do that when it is not syncing up folders properly and it will remove what is stored locally and then force a download again from the mail servers to get those messages. Also check for additional folders on the sidebar for that account.
    Mail (Mavericks): Rebuild mailboxes
    http://support.apple.com/kb/PH14958
    Regards,
    -Norm G.

  • How to open the forms in Form 9i which are saved and compiled in Forms 10g?

    Dear all,
    i have froms created with form 10g. now i want to open it in form 9i it gives the following error:
    FRM-30085 : Unable to adjust form for output.
    can i open it in form 9i?
    Regards:
    Muhammad Nadeem
    [email protected]

    you can't downgrade forms through different versions. Never ever do that. It's not supported.

  • How do I transfer just my edited pictures that are saving to the camera roll to iPhoto on my Mac?

    See above

    Try using Image Capture in the Applications folder on your Mac and see if you have success with that. Same process - select the iPad at the top and the photos should appear in the window.
    I have the original iPad and the photos that can be imported are those from the Saved Album. The Saved Album on the iPad original is the same thing as the Camera Roll on the iPad 2. Actually I thought only the photos from the camera roll or the saved album could be imported.
    This may be helpful to you.
    http://support.apple.com/kb/TS3195
    Message was edited by: Demo

  • HT1766 Backed up iPhone in iTunes how do you view pictures to make sure they are saved

    Backed up phone in iTunes but want to see on computer before I delete off phone all the pictures I saved

    The camera roll is contained in an iTunes backup but you cannot view the pictures in the backup without special third party software on your computer.
    If you wish you can load the camera roll photos to your computer by connecting it to your computer and have the iPad recognized as a camera.

  • How can I configure an OSGI component to run only in author mode and not in publish mode?

    Using scr annotation we could do the same my mentioning "@scr.property name="run.modes" values.0="author" values.1="publish"" , but how to do that with  org.apache.felix.scr.annotations.Property annotation ?

    Hi Cyprian,
    How have you configured your OPC Server tags?  Are they strings of floating point type?  What type of server is being created?
    Also, what's the end goal of this?  Generally speaking NI OPC Servers is used to communicate to a PLC as you have seen.
    Jared S.
    Applications Engineering
    National Instruments

Maybe you are looking for